Miyata 615 from original owner
#27
Senior Member
Join Date: Nov 2013
Location: Near Pottstown, PA: 30 miles NW of Philadelphia
Posts: 2,235
Bikes: 2 Trek Mtn, Cannondale R600 road, 6 vintage road bikes
Liked 1,180 Times
in
438 Posts
(Blushing)
The '88 615 seems like a solid bike - but in the 'no-shops-within 100 miles' that my niece lives, I want bulletproof or at least roadside fixable/MacGuyver-able. That early indexed shifting worries me if it goes FUBAR in the middle of nowhere. ...or am I borrowing trouble?
The '88 615 seems like a solid bike - but in the 'no-shops-within 100 miles' that my niece lives, I want bulletproof or at least roadside fixable/MacGuyver-able. That early indexed shifting worries me if it goes FUBAR in the middle of nowhere. ...or am I borrowing trouble?
Likes For Prowler:
#28
Senior Member
I personally don't have a bike with index shifting, just this one that I picked up to give to my niece. Index shifting is foreign to me. I've just heard the horror stories of the different manufactures not playing well with each other. # of speeds, spacing of freewheel/cluster, throw of the shifting mechanism, adjusting nightmares... That's why I prefer the simplicity of friction - set the lower and upper limits on the derailleur and DONE!.
Likes For Cougrrcj:
#29
Senior Member
Thread Starter
Likes For polymorphself:
#30
Senior Member
Thread Starter
Can someone tell me which fenders these are? SKS?
Likes For boatsinbottles:
#32
Senior Member
Thread Starter
#33
Senior Member
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Liked 526 Times
in
369 Posts
Nice Score OP I too am a Miyata fan. I am currently refurbing an 1987 Miyata 112 that I had as a winter trainer bike so I can sell it on after it gets some love. That 615 looks sweet.
Likes For ryansu:
#34
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 21,178
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy Viscount Aerospace Pro Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Liked 7,515 Times
in
4,199 Posts
Likes For cb400bill:
#35
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 21,178
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy Viscount Aerospace Pro Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Liked 7,515 Times
in
4,199 Posts
Likes For cb400bill:
#36
Senior Member
Thread Starter
Well, after getting the layers of muck out of the nooks, a wash, polish and wax the frame cleaned up great.
Last edited by polymorphself; 07-11-20 at 01:39 PM.
Likes For polymorphself:
#37
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,333
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Liked 1,392 Times
in
926 Posts
If the OP's bike still has radial tires, know that the bike won't handle properly until both tires are replaced.
The radial tires had a slow force-genrerating response to changes in cornering angle, a bit of slop if you will, which just doesn't work well when riding on two wheels.
The Six Ten was a sport-touring bike so better for alternating use as a road bike and either off-road or touring use. I used mine for getting to the trail head and then riding the mtb trails from there. Wheelbase/chainstays was short enough to generate some climbing traction on steep dirt trails.
My Centurion Pro-Tour is much the same, but is significantly lighter and quicker-steering than the six-ten.
EDIT: Looks like I might have spoken too soon? That frame looks too clean to ride off road!
The radial tires had a slow force-genrerating response to changes in cornering angle, a bit of slop if you will, which just doesn't work well when riding on two wheels.
The Six Ten was a sport-touring bike so better for alternating use as a road bike and either off-road or touring use. I used mine for getting to the trail head and then riding the mtb trails from there. Wheelbase/chainstays was short enough to generate some climbing traction on steep dirt trails.
My Centurion Pro-Tour is much the same, but is significantly lighter and quicker-steering than the six-ten.
EDIT: Looks like I might have spoken too soon? That frame looks too clean to ride off road!
Likes For dddd:
Likes For Narhay:
#39
Senior Member
Thread Starter
If the OP's bike still has radial tires, know that the bike won't handle properly until both tires are replaced.
The radial tires had a slow force-genrerating response to changes in cornering angle, a bit of slop if you will, which just doesn't work well when riding on two wheels.
The Six Ten was a sport-touring bike so better for alternating use as a road bike and either off-road or touring use. I used mine for getting to the trail head and then riding the mtb trails from there. Wheelbase/chainstays was short enough to generate some climbing traction on steep dirt trails.
My Centurion Pro-Tour is much the same, but is significantly lighter and quicker-steering than the six-ten.
EDIT: Looks like I might have spoken too soon? That frame looks too clean to ride off road!
The radial tires had a slow force-genrerating response to changes in cornering angle, a bit of slop if you will, which just doesn't work well when riding on two wheels.
The Six Ten was a sport-touring bike so better for alternating use as a road bike and either off-road or touring use. I used mine for getting to the trail head and then riding the mtb trails from there. Wheelbase/chainstays was short enough to generate some climbing traction on steep dirt trails.
My Centurion Pro-Tour is much the same, but is significantly lighter and quicker-steering than the six-ten.
EDIT: Looks like I might have spoken too soon? That frame looks too clean to ride off road!
Likes For polymorphself:
#40
Junior Member
Look up the Soma Supple Vitesse on eBay. I like paselas too, but these were just as inexpensive and wayyyyyyyy nicer. If you can deal with the reddish color tread.
#41
Senior Member
Thread Starter
#42
Junior Member
I’m not a fan of the red either, but I am extremely frugal, and I really like nice tires. Compass/herse are out of my price range.
Likes For Wharf Rat:
#44
Senior Member
Thread Starter
I just took it apart and see what you mean by not round. This thing is weird looking. Aesthetically I’m not into it. Will keep it for now and see how it goes. What other triples were being used at the time? I know Treks we’re using them, and the Miyata 1000 also had it. What would be a good (and prettier) upgrade though?
#45
Senior Member
Thread Starter
I just took it apart and see what you mean by not round. This thing is weird looking. Aesthetically I’m not into it. Will keep it for now and see how it goes. What other triples were being used at the time? I know Treks were using them, and the Miyata 1000 also had it. What would be a good (and prettier) upgrade though?
#46
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,587
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Liked 737 Times
in
417 Posts
Don’t replace until you try it first.
Likes For sd5782:
#47
Senior Member
Thread Starter
#48
Senior Member
Thread Starter
Some progress pics in poor light. The headset is a mess with spacers at the moment as I opted out of the giant triangle cable stop and the reflector so used what I had. Will sort it out though. Dia Comp brown hoods I had on hand don’t quite fit, going with black bar wrap so I these rustines might be a little too light. I’ll either cut the dia compes to fit or live with these. We’ll see.
Last edited by polymorphself; 07-12-20 at 07:42 PM.
Likes For polymorphself:
Likes For Piff:
#50
Senior Member
Thread Starter
Does anybody have insight on Miyata sizing over the years? They started out measuring in inches and then moved to cm. I have a 1985 Miyata 310 in their 23" size and I like the fit a lot. I figured this being their 57cm size, it's only a ~1.27cm difference, right? Is it safe to simply convert that way? Next size up would be 60cm anyways which I wouldn't be too comfy with.