Trading
#126
Elitist
Thread Starter
I've updated my list above. The Dolan/Navigator 5 spoke is no longer available.
Current list: https://www.bikeforums.net/20796464-post114.html
Current list: https://www.bikeforums.net/20796464-post114.html
#127
Elitist
Thread Starter
So sorry that I missed this, [MENTION=92828]topflightpro[/MENTION].
Yes, I sold the Felt to a national-level elite racer that lives here in ATL.
Not sure what I'm gonna do with the Snyder. It's hanging in my garage. I'd probably sell it. I'd rather it be raced than live unused in my garage.
Yes, I sold the Felt to a national-level elite racer that lives here in ATL.
Not sure what I'm gonna do with the Snyder. It's hanging in my garage. I'd probably sell it. I'd rather it be raced than live unused in my garage.
#129
Building up an old Makino and am looking for a crank.
Since I'm building it sort of "as raced" I'd like an "njs" (doesn't actually have to be stamped, but something that *would* have been/be used) square taper (already have a square taper bb)
I'm not really going to be using it other than maybe for fun every now and then, so crank length isn't terribly important. I was thinking about trying my hand at polishing up all of the components, so condition isn't a big concern (other than working and prefer to avoid any deep gashes I can't sand out) and of course would like to keep it pretty cheap. Would also prefer it was *not* Campagnolo.
I think my list is a page back of stuff I have for trade. I'll check but it should be up to date
Since I'm building it sort of "as raced" I'd like an "njs" (doesn't actually have to be stamped, but something that *would* have been/be used) square taper (already have a square taper bb)
I'm not really going to be using it other than maybe for fun every now and then, so crank length isn't terribly important. I was thinking about trying my hand at polishing up all of the components, so condition isn't a big concern (other than working and prefer to avoid any deep gashes I can't sand out) and of course would like to keep it pretty cheap. Would also prefer it was *not* Campagnolo.
I think my list is a page back of stuff I have for trade. I'll check but it should be up to date
#130
Elitist
Thread Starter
If you can't find someone to trade with maybe consider going here: https://www.njs-export.com/collections/cranks
I've never ordered from them, but I think they were responsive when I emailed with questions a few years ago. So, don't consider this an endorsement.
Also, Sugino 75s are NJS spec and sorta easy to find in the US.
I've never ordered from them, but I think they were responsive when I emailed with questions a few years ago. So, don't consider this an endorsement.
Also, Sugino 75s are NJS spec and sorta easy to find in the US.
#131
If you can't find someone to trade with maybe consider going here: https://www.njs-export.com/collections/cranks
I've never ordered from them, but I think they were responsive when I emailed with questions a few years ago. So, don't consider this an endorsement.
Also, Sugino 75s are NJS spec and sorta easy to find in the US.
I've never ordered from them, but I think they were responsive when I emailed with questions a few years ago. So, don't consider this an endorsement.
Also, Sugino 75s are NJS spec and sorta easy to find in the US.
#132
Senior Member
Join Date: May 2015
Location: Delaware, USA
Posts: 607
Bikes: Serotta steel track bike, Specialized MTB
Likes: 0
Liked 4 Times
in
3 Posts
Have
- 2016 Dixie Flyer 56cm frameset (includes DF original fork, Alpina Fork, and Cinelli Ram oversized seat post)
Depending on the deal I can also include Look Ergostem oversized stem
Want
- Steel 55cm(Top tube) track frameset.
- Carbon 55cm(Top tube) track frameset.
I prefer long dropout and short headtube(prefer to be shorter than 120mm)
I am currently located in NYC but I am going back to LA on September.
- 2016 Dixie Flyer 56cm frameset (includes DF original fork, Alpina Fork, and Cinelli Ram oversized seat post)
Depending on the deal I can also include Look Ergostem oversized stem
Want
- Steel 55cm(Top tube) track frameset.
- Carbon 55cm(Top tube) track frameset.
I prefer long dropout and short headtube(prefer to be shorter than 120mm)
I am currently located in NYC but I am going back to LA on September.
#133
My list (page back) still pretty much up to date.
Testing the water on my Fuji Track Elite (2017 - Med) as well. It's a bit more sprinter geometry than I am really a sprinter.
Testing the water on my Fuji Track Elite (2017 - Med) as well. It's a bit more sprinter geometry than I am really a sprinter.
Last edited by Morelock; 12-14-19 at 11:41 AM.
#134
Elitist
Thread Starter
Have:
Tri All 3 Sports Professional Hard Travel Case
Single bike case, road or mountain, made of High Molecular Weight Polyethylene, lockable steel latch system, and four heavy-duty casters. Room room for extra gear, two outer straps for extra security. Interior measures 47"L x 15"W x 26"H and weighs 35 lbs. Exterior measures 51"L x 18"W x 32"H (includes casters). $595 MSRP.
Local pickup is preferred (Atlanta Metro area). But, I'd be willing to ship if you arrange it, as in you make payment arrangements with the shipper and I put a label on it and they come and they pick it up from my home.
Info: https://triall3sports.com/cases-bike.php
Pics: https://triall3sports.com/photogallery.php
Want:
?
Tri All 3 Sports Professional Hard Travel Case
Single bike case, road or mountain, made of High Molecular Weight Polyethylene, lockable steel latch system, and four heavy-duty casters. Room room for extra gear, two outer straps for extra security. Interior measures 47"L x 15"W x 26"H and weighs 35 lbs. Exterior measures 51"L x 18"W x 32"H (includes casters). $595 MSRP.
Local pickup is preferred (Atlanta Metro area). But, I'd be willing to ship if you arrange it, as in you make payment arrangements with the shipper and I put a label on it and they come and they pick it up from my home.
Info: https://triall3sports.com/cases-bike.php
Pics: https://triall3sports.com/photogallery.php
Want:
?
Last edited by carleton; 02-01-20 at 02:44 PM.
#136
Full Member
WANT:
HAVE:
- Anyone have an EAI Keirin Tool you're looking to get rid of?
- Got Speedplay Zero Track pedals that need a new home?
HAVE:
- Velotec Sz Med speedsuit, long-sleeve, worn in 3 short races, not trained in, perfect condition. Black color.
- Pro Vibe 7S Sprint Handlebar, 42cm. Matching Pro Vibe 7S Stem, 130mm. Both with 1hr of use, perfect.
- Zipp SC SL-80 Handlebar, 38cm, very gently enjoyed for a few weeks, perfect condition.
- Felt aluminum sprint bar, 40cm. Perfect condition, removed from bike when new, perfect. Matching 110mm stem, unused, perfect.
Last edited by Super D; 03-25-20 at 11:34 PM.
#138
Refresh time
Have -
USE Tula's (Track and Road Pods) 40cm
DMT Pista's - size 45 drilled for SPD-R
WANT:
Small'ish (51/54) T4 or other pursuiter frame
Have -
USE Tula's (Track and Road Pods) 40cm
DMT Pista's - size 45 drilled for SPD-R
WANT:
Small'ish (51/54) T4 or other pursuiter frame
Last edited by Morelock; 07-02-21 at 04:43 AM.
Thread
Thread Starter
Forum
Replies
Last Post
TheLizardKing
Track Cycling: Velodrome Racing and Training Area
14
07-18-15 12:19 PM
Gordy748
Track Cycling: Velodrome Racing and Training Area
6
10-02-12 03:56 PM
hwdxbassist
Singlespeed & Fixed Gear
39
04-10-11 12:57 AM