Enjoy It While It Lasts: Show Your Broken & Worn-Out Gear
#101
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,278
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,579 Times
in
3,776 Posts
#102
Oh that felt good!
Nothing wrong here, or is there?
#103
Senior Member
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,565
Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"
Liked 1,363 Times
in
506 Posts
This just happened yesterday. I loaned my buddy Thor this rear derailleur and rear wheel to ride Eroica California with. Oops…looks like somebody didn’t tighten the cage to the derailleur enough. The derailleur rear plate was twisted into scrap. Not sure if the dropout can be saved. A visit to a framemaker is indicated.
#104
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,012
Bikes: Klein, Merckx, Trek
Liked 3,066 Times
in
1,657 Posts
Rolls with steel rails replaced Rolls Titanio... at least it was light.
I usually aim to change tires when I have one ride left... did a couple too many on this one.
This rim failure really caught me by surprise.
Non-cycling related break, but certainly affected my riding.
I think my surgeon was a fan of sew-ups.
I usually aim to change tires when I have one ride left... did a couple too many on this one.
This rim failure really caught me by surprise.
Non-cycling related break, but certainly affected my riding.
I think my surgeon was a fan of sew-ups.
Likes For Sir_Name:
#107
Senior Member
Back in the 80's, I had a less severe bit of knee work, and the doc put in about a dozen stitches. Not a big deal. After many(?) weeks, the doc had to remove the stitches, and I was surprised to feel a bit woozy watching him take them out. Very odd, because there was no feeling. I'm guessing that having staples removed is a bit more traumatic?
Steve in Peoria (no stitches since then, fortunately)
#108
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,278
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,579 Times
in
3,776 Posts
I don't recall any of my sew-ups being closed with staples. Maybe I can loan your doc my spare roll of Velox sew-up thread for the next time? Don't forget to put a base tape over it too.
Back in the 80's, I had a less severe bit of knee work, and the doc put in about a dozen stitches. Not a big deal. After many(?) weeks, the doc had to remove the stitches, and I was surprised to feel a bit woozy watching him take them out. Very odd, because there was no feeling. I'm guessing that having staples removed is a bit more traumatic?
Steve in Peoria (no stitches since then, fortunately)
Back in the 80's, I had a less severe bit of knee work, and the doc put in about a dozen stitches. Not a big deal. After many(?) weeks, the doc had to remove the stitches, and I was surprised to feel a bit woozy watching him take them out. Very odd, because there was no feeling. I'm guessing that having staples removed is a bit more traumatic?
Steve in Peoria (no stitches since then, fortunately)
#109
Strong Walker
[MENTION=175208]gaucho777[/MENTION]: nice collectin there but i would think twice about trying to fix a bent brake. not even for a wallhanger. this is aluminum, and that changes its properties drastically when ben and gets extremely brittle.
i found these cranks on an Alan i bought once, still unsure if the previous owner had very thick ankles and so took a file to them to get clearance, or just had very thick ankles and liked socks made from scotchbrite
and possibly too new for this thread but i took this pic of my Keywin cleats. i think it was time to get new ones...
i found these cranks on an Alan i bought once, still unsure if the previous owner had very thick ankles and so took a file to them to get clearance, or just had very thick ankles and liked socks made from scotchbrite
and possibly too new for this thread but i took this pic of my Keywin cleats. i think it was time to get new ones...
#110
Senior Member
This just happened yesterday. I loaned my buddy Thor this rear derailleur and rear wheel to ride Eroica California with. Oops…looks like somebody didn’t tighten the cage to the derailleur enough. The derailleur rear plate was twisted into scrap. Not sure if the dropout can be saved. A visit to a framemaker is indicated.
Did it cause the flat too?
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#111
Yes. I was riding behind Thor on Vineyard Road when it happened. Thought it was just a flat until circling back to help him out.
RD caused the jam that caused the wheel to lock up that caused the flat.
Popped so loud I could hear it 20 feet back.
RD caused the jam that caused the wheel to lock up that caused the flat.
Popped so loud I could hear it 20 feet back.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#113
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Liked 1,453 Times
in
723 Posts
This just happened to me last night, on routine tire inflation.
RIP Mavic A319, 2016-2022.
And, coming soon, long live the next A319 I put in there! - Or maybe a Rigida Sputnik? Decisions, decisions...
RIP Mavic A319, 2016-2022.
And, coming soon, long live the next A319 I put in there! - Or maybe a Rigida Sputnik? Decisions, decisions...
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Likes For scarlson:
Likes For P!N20:
#115
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,652
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Liked 2,579 Times
in
1,586 Posts
Thank goodness you caught that at home! Erstwhile member FBinNY used to recommend overinflating by 20% to test rims that you think might be getting thin.
#116
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,525
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Liked 712 Times
in
401 Posts
Seeing some of the broken derailleur pics leading to chains behind freewheels reminds me why I kinda like dork disks. Flame away.
#117
Polymultiplié
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,096
Bikes: Yes, please.
Liked 4,899 Times
in
1,833 Posts
In '14 I bought a bike, advertised as being "in excellent condition".
This is what the remnants of the RD looked like:
The FD wasn't much better:
Needless to say I also had to replace a number of spokes, unstick a frozen seatpost...
.... and deal with all other sorts of malheur.
The good news was that the bike only cost me €40 and made a nice rider for little more than €60.
This is what the remnants of the RD looked like:
The FD wasn't much better:
Needless to say I also had to replace a number of spokes, unstick a frozen seatpost...
.... and deal with all other sorts of malheur.
The good news was that the bike only cost me €40 and made a nice rider for little more than €60.
Likes For non-fixie:
#118
Senior Member
It was early on a hot Sunday morning in the summer. I was about 3 miles into a 50 mile ride when the rear wheel suddenly locked up, skidding to a stop. The frame mounted pump on the seat tube popped off, and I was left to wonder WTF??
A look at the rear wheel gave a pretty good idea of what started the incident...
Steve in Peoria
A look at the rear wheel gave a pretty good idea of what started the incident...
Steve in Peoria
Likes For Sir_Name:
#119
Senior Member
#120
Full Member
I found this on my Bianchi... Too bad I did not notice this when I was looking at the Bike for purchase. Fortunately I got the Bike cheap enough to replace it and it still be a good deal.
#121
Senior Member
That is impressive in so many ways!
The big question is: what can we blame it on??
Too much torque?
Someone applied grease to the axle taper??
Someone didn't apply grease to the axle taper??
Someone re-torqued too often?
Maybe we can just blame the extractor bolt?
It does suggest that the owner wasn't paying much attention to the bike, so I'd be worried that everything else was trashed too.
Steve in Peoria
#122
Full Member
wow!
That is impressive in so many ways!
The big question is: what can we blame it on??
Too much torque?
Someone applied grease to the axle taper??
Someone didn't apply grease to the axle taper??
Someone re-torqued too often?
Maybe we can just blame the extractor bolt?
It does suggest that the owner wasn't paying much attention to the bike, so I'd be worried that everything else was trashed too.
Steve in Peoria
That is impressive in so many ways!
The big question is: what can we blame it on??
Too much torque?
Someone applied grease to the axle taper??
Someone didn't apply grease to the axle taper??
Someone re-torqued too often?
Maybe we can just blame the extractor bolt?
It does suggest that the owner wasn't paying much attention to the bike, so I'd be worried that everything else was trashed too.
Steve in Peoria
I think someone over tightened it. The entire bike is getting a one part at a time inspection and through cleaning and lubrication.
Likes For Roger M:
Likes For Brad L:
#125
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,635
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Liked 2,262 Times
in
1,129 Posts
The following broke all at once suddenly
P6010928 on Flickr
P6010920 on Flickr
P9051176 on Flickr
P6010921 on Flickr
P9081222 on Flickr
Helicomatic rear DS
P1000288 on Flickr
Bike Friday rear triangle "DO" that clamps the rear to the frame:
P1010350 on Flickr
P1000535 on Flickr
P6010928 on Flickr
P6010920 on Flickr
P9051176 on Flickr
P6010921 on Flickr
P9081222 on Flickr
Helicomatic rear DS
P1000288 on Flickr
Bike Friday rear triangle "DO" that clamps the rear to the frame:
P1010350 on Flickr
P1000535 on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.