View Poll Results: How often do you clean your brake rotors (or rim surface) and pads?
Regularly (How often)
3
7.89%
Here and There
12
31.58%
No
23
60.53%
Voters: 38. You may not vote on this poll
How often do you clean your brake pads?
#26
Advanced Slacker
Join Date: Feb 2017
Posts: 6,252
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Liked 2,571 Times
in
1,451 Posts
#27
Maybe because I regularly go up mountains with long and steep gradients, I probably use the brakes hard and long enough to make intense heat and vaporize any unwanted stuff on the brake pads and the rotors.
#28
Senior Member
IPA on the rims about weekly. In the rare case that pads are glazed, sandpaper.
#29
Advanced Slacker
Join Date: Feb 2017
Posts: 6,252
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Liked 2,571 Times
in
1,451 Posts
I think the reason you find sanding helps or is needed is that you’ve got contaminated pads. Sanding is often just a temporary solution, as the contamination makes its way back to the surface.
Brake dust should have no negative effects on braking, and unless you have comtaminated the pads and feel a decrease in braking, there is no reason the clean/sand them, which is why no manufacturer recomends doing it as a part of regular maintenance.
Brake dust should have no negative effects on braking, and unless you have comtaminated the pads and feel a decrease in braking, there is no reason the clean/sand them, which is why no manufacturer recomends doing it as a part of regular maintenance.
#30
I think the reason you find sanding helps or is needed is that you’ve got contaminated pads. Sanding is often just a temporary solution, as the contamination makes its way back to the surface.
Brake dust should have no negative effects on braking, and unless you have comtaminated the pads and feel a decrease in braking, there is no reason the clean/sand them, which is why no manufacturer recomends doing it as a part of regular maintenance.
Brake dust should have no negative effects on braking, and unless you have comtaminated the pads and feel a decrease in braking, there is no reason the clean/sand them, which is why no manufacturer recomends doing it as a part of regular maintenance.
#31
Senior Member
Join Date: Feb 2017
Location: Hollister, CA (not the surf town)
Posts: 1,777
Bikes: 2019 Specialized Roubaix Comp Di2, 2009 Roubaix, early 90's Giant Iguana
Liked 1,651 Times
in
582 Posts
I'll clean the rotors occasionally with automotive wheel cleaner that is suitable for painted wheels. I've never cleaned the pads and haven't felt the need to..
#32
Drip, Drip.
Thread Starter
Join Date: Oct 2020
Location: Southern Ontario
Posts: 1,575
Bikes: Trek Verve E bike, Felt Doctrine 4 XC, Opus Horizon Apex 1
Liked 193 Times
in
163 Posts
So assuming that the rotors are clean, this should help ensure that the majority of potential contamination doesn't make it's way to the pads?
Since sanding works really well , temporarily, how can I prevent contamination, period?
Since sanding works really well , temporarily, how can I prevent contamination, period?
#33
Guest
#34
Advanced Slacker
Join Date: Feb 2017
Posts: 6,252
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Liked 2,571 Times
in
1,451 Posts
Aside from the obvious stuff like keeping oily stuff off the pads and rotors..... Just ride the bike and hope for the best. Sometimes it just happens. By road bike pads have never gotten contaminated, but my MTB pads have, and I really don't know how. For some reason when my XT pads on my MTB sit over the winter, something happens to them and the act like they are contaminated. This year I picked up on the blowtorch trick and it worked.
#35
Senior Member
Join Date: Jan 2013
Posts: 2,830
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Liked 676 Times
in
463 Posts
I have no opinion on bikes but for cars and trucks this is backward. For years I was responsible for a maintenance department with a fleet of 251 mobile vehicles from cars to 350 ton haul trucks traveling up and down open pit mine haul roads and spent a lot of time studying this issue and the literature is clear.
Last edited by easyupbug; 06-17-22 at 07:35 AM.
#36
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 16,143
Bikes: Tarmac Disc Comp Di2 - 2020
Liked 5,404 Times
in
3,729 Posts
I have no opinion on bikes but for cars and trucks this is backward. For years I was responsible for a maintenance department with a fleet of 251 mobile vehicles from cars to 350 ton haul trucks traveling up and down open pit mine haul roads and spent a lot of time studying this issue and the literature is clear.
#37
Drip, Drip.
Thread Starter
Join Date: Oct 2020
Location: Southern Ontario
Posts: 1,575
Bikes: Trek Verve E bike, Felt Doctrine 4 XC, Opus Horizon Apex 1
Liked 193 Times
in
163 Posts
Firm braking (at least for cars and trucks...) Assuming you're not locking up the brakes or braking too hard, helps recondition the pads/rotors and promote even wear, assuming that everything is mounted properly. Assuming we all have the same idea regarding "firm" , what he was saying makes sense. It's actually important to occasionally do some firm "bedding" type stops here and there when the brakes are often subjected to uneven use patterns with Insufficient heat build up, using them lightly, or too hard, whenever they ARE in use.
#38
#39
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,321
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,331 Times
in
2,788 Posts
Rim brakes - I regularly hose my bikes off with a light spray but blast the brake shoe from both directions to both clean out the ugly black dust and remove any grit.
Right now I have a little tubular glue on my rear rim and a shudder when braking. Persistent stuff! I've done two cleansings so far with Simple Green, paint remover and dish soap. Better each time but still there.
Right now I have a little tubular glue on my rear rim and a shudder when braking. Persistent stuff! I've done two cleansings so far with Simple Green, paint remover and dish soap. Better each time but still there.
#40
Senior Member
Join Date: Jan 2020
Location: Sacramento
Posts: 1,051
Bikes: Ibis Hakka MX / team machince alr2 / topstone 1 / Cervelo zht
Liked 278 Times
in
204 Posts
It not obvious to me.
For cars, trucks and even bicycles, most of the stuff I've read suggests firm braking is better for brake pad and rotor life. Dragging ones brakes is ineffective for stopping and just creates unnecessary heat which is bad for every thing.
Now if you are talking about hard stops where the bike or any other vehicle is going so fast that the braking can't be accomplished before the parts get too hot, then I might agree.
For cars, trucks and even bicycles, most of the stuff I've read suggests firm braking is better for brake pad and rotor life. Dragging ones brakes is ineffective for stopping and just creates unnecessary heat which is bad for every thing.
Now if you are talking about hard stops where the bike or any other vehicle is going so fast that the braking can't be accomplished before the parts get too hot, then I might agree.
Likes For sean.hwy: