It was a good day in Portland…..
#1
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,277 Times
in
828 Posts
It was a good day in Portland…..
There was the Chris King open house.
got to geek out with Chris on his 1972 Cinelli and why the components he has. Example, switched out the Campy NR RD for sun tour to Accommodate his campy triple crankset.
saw all the machinery to create the magic.
saw amazing small producer bikes and see the future as it unfolds. Stunning.
I feel like a poser wearing a jersey when I actually drove there, unlike our own Merziac who rode in, despite presidential traffic. (Biden was in town)
This is in front of Chris King’s personal steed that he rode from the Bay Area to Portland.
Greta in the back of Framebuilder Oscar’s awesome land rover. (Simple bikes)
Chris and I.
and, our own Merziac gave me his drink ticket.
what a day.
got to geek out with Chris on his 1972 Cinelli and why the components he has. Example, switched out the Campy NR RD for sun tour to Accommodate his campy triple crankset.
saw all the machinery to create the magic.
saw amazing small producer bikes and see the future as it unfolds. Stunning.
I feel like a poser wearing a jersey when I actually drove there, unlike our own Merziac who rode in, despite presidential traffic. (Biden was in town)
This is in front of Chris King’s personal steed that he rode from the Bay Area to Portland.
Greta in the back of Framebuilder Oscar’s awesome land rover. (Simple bikes)
Chris and I.
and, our own Merziac gave me his drink ticket.
what a day.
#2
Disraeli Gears
What?! Fat Tire shows up to serve ale, and it's in cans? In Portlandia? What the hell is the world coming to?
I like Mr King's shirt, and his other products like headsets are OK, but his attention-seeking noisesome freehub bodies are, in my opinion, one of the banes of cycling existence (right up there with wannabee "sponsored" lycra).
I like Mr King's shirt, and his other products like headsets are OK, but his attention-seeking noisesome freehub bodies are, in my opinion, one of the banes of cycling existence (right up there with wannabee "sponsored" lycra).
#4
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,277 Times
in
828 Posts
What?! Fat Tire shows up to serve ale, and it's in cans? In Portlandia? What the hell is the world coming to?
I like Mr King's shirt, and his other products like headsets are OK, but his attention-seeking noisesome freehub bodies are, in my opinion, one of the banes of cycling existence (right up there with wannabee "sponsored" lycra).
I like Mr King's shirt, and his other products like headsets are OK, but his attention-seeking noisesome freehub bodies are, in my opinion, one of the banes of cycling existence (right up there with wannabee "sponsored" lycra).
#5
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,321
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,331 Times
in
2,788 Posts
What?! Fat Tire shows up to serve ale, and it's in cans? In Portlandia? What the hell is the world coming to?
I like Mr King's shirt, and his other products like headsets are OK, but his attention-seeking noisesome freehub bodies are, in my opinion, one of the banes of cycling existence (right up there with wannabee "sponsored" lycra).
I like Mr King's shirt, and his other products like headsets are OK, but his attention-seeking noisesome freehub bodies are, in my opinion, one of the banes of cycling existence (right up there with wannabee "sponsored" lycra).
I fully agree - freehubs should be silent or very close. But resisting what the public insists on isn't being money making smart. So I can only blame Chris King so much. (Says he who used to grease his Winner FWs so no one could hear that he wasn't working in a race. Edit: And will never consider a King hub until that sound is gone.)
Last edited by 79pmooney; 10-16-22 at 11:15 AM.
#6
Likes For Polaris OBark:
#7
Senior Member
What?! Fat Tire shows up to serve ale, and it's in cans? In Portlandia? What the hell is the world coming to?
I like Mr King's shirt, and his other products like headsets are OK, but his attention-seeking noisesome freehub bodies are, in my opinion, one of the banes of cycling existence (right up there with wannabee "sponsored" lycra).
I like Mr King's shirt, and his other products like headsets are OK, but his attention-seeking noisesome freehub bodies are, in my opinion, one of the banes of cycling existence (right up there with wannabee "sponsored" lycra).
Big Stress inGermany
#8
Senior Member
Those noisy freehubs - King gave a few prototypes to users to put through the paces. Focus was on getting them to work. Sound was an issue to address at the next stage. (Why do all the additional machining for quiet when it's 50-50 you're going to be machining more of the same parts from scratch for Mark II.) But the testers raved about the sound!
I fully agree - freehubs should be silent or very close. But resisting what the public insists on isn't being money making smart. So I can only blame Chris King so much. (Says he who used to grease his Winner FWs so no one could hear that he wasn't working in a race. Edit: And will never consider a King hub until that sound is gone.)
I fully agree - freehubs should be silent or very close. But resisting what the public insists on isn't being money making smart. So I can only blame Chris King so much. (Says he who used to grease his Winner FWs so no one could hear that he wasn't working in a race. Edit: And will never consider a King hub until that sound is gone.)
Likes For repechage:
#9
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,321
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,331 Times
in
2,788 Posts
#10
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,277 Times
in
828 Posts
While this thread has gone sideways, Here in the west coast most of our glass supplies are from China. Because of the high cost of transportation for empty bottles, two businesses have emerged, one in NAPA valley and one in Kalama WA providing glass to the Washington and Oregon wine industries.
I don't own a Chris King product. But, he has been very active in supporting the local cycling community. The open house showcased other local cycling producers and products including the new Benson High School frame building program teaching kids much needed skills to enter the workforce.
I will admit, during the tour where everything minus the anodizing is done in-house. a rear hub was passed around and the only thing I noticed was how loud it was.
HOWEVER, it did not detract from what a beautiful day it was.
I don't own a Chris King product. But, he has been very active in supporting the local cycling community. The open house showcased other local cycling producers and products including the new Benson High School frame building program teaching kids much needed skills to enter the workforce.
I will admit, during the tour where everything minus the anodizing is done in-house. a rear hub was passed around and the only thing I noticed was how loud it was.
HOWEVER, it did not detract from what a beautiful day it was.
#11
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,554
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Liked 1,238 Times
in
603 Posts
Those noisy freehubs - King gave a few prototypes to users to put through the paces. Focus was on getting them to work. Sound was an issue to address at the next stage. (Why do all the additional machining for quiet when it's 50-50 you're going to be machining more of the same parts from scratch for Mark II.) But the testers raved about the sound!
I fully agree - freehubs should be silent or very close. But resisting what the public insists on isn't being money making smart. So I can only blame Chris King so much. (Says he who used to grease his Winner FWs so no one could hear that he wasn't working in a race. Edit: And will never consider a King hub until that sound is gone.)
I fully agree - freehubs should be silent or very close. But resisting what the public insists on isn't being money making smart. So I can only blame Chris King so much. (Says he who used to grease his Winner FWs so no one could hear that he wasn't working in a race. Edit: And will never consider a King hub until that sound is gone.)
#13
Disraeli Gears
Likes For Charles Wahl:
#14
Full Member
Sadly, I now have a PowerTap rear hub that sounds just as loud. I'm trying to coast less.
#15
Senior Member
I forgot about it. did you see this there? my wife is blind so riding there on the tandem would nto do much for her.
#17
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 10,367
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Liked 3,474 Times
in
1,820 Posts
There was the Chris King open house.
got to geek out with Chris on his 1972 Cinelli and why the components he has. Example, switched out the Campy NR RD for sun tour to Accommodate his campy triple crankset.
saw all the machinery to create the magic.
saw amazing small producer bikes and see the future as it unfolds. Stunning.
I feel like a poser wearing a jersey when I actually drove there, unlike our own Merziac who rode in, despite presidential traffic. (Biden was in town)
This is in front of Chris King’s personal steed that he rode from the Bay Area to Portland.
Greta in the back of Framebuilder Oscar’s awesome land rover. (Simple bikes)
Chris and I.
and, our own Merziac gave me his drink ticket.
what a day.
got to geek out with Chris on his 1972 Cinelli and why the components he has. Example, switched out the Campy NR RD for sun tour to Accommodate his campy triple crankset.
saw all the machinery to create the magic.
saw amazing small producer bikes and see the future as it unfolds. Stunning.
I feel like a poser wearing a jersey when I actually drove there, unlike our own Merziac who rode in, despite presidential traffic. (Biden was in town)
This is in front of Chris King’s personal steed that he rode from the Bay Area to Portland.
Greta in the back of Framebuilder Oscar’s awesome land rover. (Simple bikes)
Chris and I.
and, our own Merziac gave me his drink ticket.
what a day.
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.
Likes For squirtdad:
#18
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,743
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Liked 471 Times
in
336 Posts
Just curious - any idea when Chris King will make more of this tool? I have 2 wheel sets with Chris King hubs (R45’s?) and would like to be able to service them when needed.
#19
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,277 Times
in
828 Posts
I don’t own any Chris King products. I don’t work for Chris King.
He is a social friend.
I have no idea of his production, what he used to make what he makes now. and when he will make what are prototypes for the future.
Please direct all Chris King comments and inquiries to Chris King Inc.
He is a social friend.
I have no idea of his production, what he used to make what he makes now. and when he will make what are prototypes for the future.
Please direct all Chris King comments and inquiries to Chris King Inc.
Last edited by Robvolz; 10-16-22 at 09:05 PM.
Likes For Robvolz:
#20
Senior Member
I was told they are selling like crazy. so I hope this caddy will sell well too. I have not seen it on their webpage yet. but this tool is just a all in one tool veres the individual ones.
Likes For fooferdoggie: