Zipp Service Course SL stem varieties?
#1
Senior Member
Thread Starter
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,555
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Liked 725 Times
in
515 Posts
Zipp Service Course SL stem varieties?
I have one of these in 100mm, and it's pretty damn sweet except for the fact it's sized for a bike a size too large for me.
So now I've got the bike in my size, and I order the same stem in 120mm, and I get something different.
What gives? How do I get the beefier design in 120?
So now I've got the bike in my size, and I order the same stem in 120mm, and I get something different.
What gives? How do I get the beefier design in 120?
#2
Senior Member
The design has obviously changed over the years. You'd have to get pictures of the actual product to get what you want. I have the sturdier version, but it was bought 2-3 years ago.
#3
Senior Member
Thread Starter
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,555
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Liked 725 Times
in
515 Posts
Anyone got the old style in 120 they'd like to swap for the new style? It has the same stack height.
#4
Senior Member
If it was an ExtraLite in 100mm, I'd buy it from you, then you can use the cash to buy what you want
This is what I prefer:
This is what I prefer:
#5
Senior Member
Thread Starter
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,555
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Liked 725 Times
in
515 Posts
That looks pretty minimal... I decided the stem wasn't a place to skimp on metal after I tried a light one, got too much flex with a 100g stem. The Zipp at around 140 was the ticket for me.
#6
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,739
Bikes: Merlin Cyrene, Nashbar steel CX
Liked 1,565 Times
in
1,028 Posts
EDIT:. actually maybe I should ask instead where you got the 'new style'. Zipp's website for their product doesn't seem to show a cutout on the steerer tube end.
Last edited by Sy Reene; 05-07-23 at 07:53 AM.
#8
Senior Member
There's also more than one angle. The zipp website only lists 25 degree, but both 6 and 17 used to be available. I have a 17 in the minus direction.