118m bottom bracket with crankset meant for 123mm?
#1
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,510
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 582 Post(s)
Liked 119 Times
in
100 Posts
118mm bottom bracket with crankset meant for 123mm?
Hello,
Shimano's FC-TY501-2 46/30T double crankset is meant to be used with a 123mm bottom bracket.
If installed on a 118mm bottom bracket , does it mean it will sit too far outward for the derailleur to do its magic?
Thank you.
Shimano's FC-TY501-2 46/30T double crankset is meant to be used with a 123mm bottom bracket.
If installed on a 118mm bottom bracket , does it mean it will sit too far outward for the derailleur to do its magic?
Thank you.
#2
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,557
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2755 Post(s)
Liked 3,427 Times
in
2,075 Posts
Opposite. Means it'll sit too far inward for correct chainline and/or inner chainring or crank arm will hit the chainstay. if those things work out the FD may not retract far enough to drop to inner ring or have chain rub on inner ring.
Likes For dedhed:
#4
Senior Member
Hello,
Shimano's FC-TY501-2 46/30T double crankset is meant to be used with a 123mm bottom bracket.
If installed on a 118mm bottom bracket , does it mean it will sit too far outward for the derailleur to do its magic?
Thank you.
Shimano's FC-TY501-2 46/30T double crankset is meant to be used with a 123mm bottom bracket.
If installed on a 118mm bottom bracket , does it mean it will sit too far outward for the derailleur to do its magic?
Thank you.
A 3mm difference in the DS shouldn't cause a problem with the FD. With the stated crankset (48.5mm chainline per Shimano spec on a 123mm BB), the chainline should still be in the 45mm area.
If you have the crankset installed on the 122mm now, you can check of the low limit screw has some loosening possible to move the low position closer to the centerline.
#5
I’m a little Surly
Join Date: Jan 2010
Location: Near the district
Posts: 2,429
Bikes: Two Cross Checks, Karate Monkey, Disc Trucker, and a VO Randonneur
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 699 Post(s)
Liked 1,304 Times
in
651 Posts
You’re going to have to put it together and measure
This is the bike I ride every day I wouldn’t pull 3mm out because it might hit if flexed.
Here’s my mountain bike, I don’t think there’s 3mm to pull.
This is the bike I ride every day I wouldn’t pull 3mm out because it might hit if flexed.
Here’s my mountain bike, I don’t think there’s 3mm to pull.
#6
Senior Member
Join Date: Mar 2012
Posts: 1,016
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 518 Post(s)
Likes: 0
Liked 660 Times
in
370 Posts
MAY hit the chain stay. Some bikes have massive clearance between the crank arm and the chain stay, while others have little room for reduced clearance.