Anyone recognize these bars?
#1
Anyone recognize these bars?
I picked these bars up at the local co-op for my '74 Grand Prix, but have liked them so much that I have swapped them out to my new Centurion and passed the Grand Prix off with the Centurion's bars. They're the right width with a decent amount of drop and plenty of bar coming back off the curve to grab onto when climbing. Sadly, I don't recognize the brand name, but hopefully one of y'all can help me out.
Here are pics of the engravings:
What I can read:
Drive side - La Bonneville / Iton 27190
CTA
La Technique Avion
Appliquee
Aux 2 Roues
France
Non-drive side - Crown above lions
Here are pics of the engravings:
What I can read:
Drive side - La Bonneville / Iton 27190
CTA
La Technique Avion
Appliquee
Aux 2 Roues
France
Non-drive side - Crown above lions
#2
Stop reading my posts!
WOW! space ships and Lions rampant!
well, that's not technically correct, that would be standing up, these lions are horizontal,
but still Heraldic!
I have no idea...at all...except they say they are La Technique Avion (means zip to me)
well, that's not technically correct, that would be standing up, these lions are horizontal,
but still Heraldic!
I have no idea...at all...except they say they are La Technique Avion (means zip to me)
Last edited by unworthy1; 06-22-09 at 09:59 PM.
#3
Senior Member
Join Date: Oct 2007
Location: Québec, Québec, Canada
Posts: 225
Bikes: Fuji Touring 64cm, Peugeot Canada PB-18 61cm and winter beaters
Likes: 0
Liked 0 Times
in
0 Posts
La Technique Avion -- The Airplane Technique (Airplane Technology)
Appliquee -- Applied
Aux 2 Roues -- To 2 Wheels
Very nice engravings! That plane looks like a Concorde to me!
Appliquee -- Applied
Aux 2 Roues -- To 2 Wheels
Very nice engravings! That plane looks like a Concorde to me!
#4
Stop reading my posts!
hmmm, wonder if this has ANYthing to do with Viscount and the "aerospace" marketing they did?
If there are 3 lions, it's the coat of arms of England (which still doesn't mean anything to me, yet).
Thanks for the translation, hernick!
If there are 3 lions, it's the coat of arms of England (which still doesn't mean anything to me, yet).
Thanks for the translation, hernick!
#5
Senior Member
I believe those bars were on a Peugeot I just sold. Unfortunately, I didn't take any closeup pics.
Neal
Neal
#6
Stop reading my posts!
^ that's all I can find on them: appears to be a brand spec'd on some Peugeots, but no further info...miamijim may know something about 'em.
#7
Vintage French Bike Fan
Join Date: Jun 2007
Location: Portland, OR
Posts: 628
Bikes: Peugeot UO-8, Peugeot 80's 12 spd
Likes: 0
Liked 0 Times
in
0 Posts
These were stock on 80's Peugeots. They are good quality French bars made by CTA. The French phrase says "Aviation technology applied to two wheels". They were made in the town of La Bonneville sur Iton.
Cheers,
Karl
Cheers,
Karl
#8
Thanks for the ID. I'm not surprised they're nothing too special. Probably got left at the co-op by some college kid looking to put tiny little riser bars on his fixie conversion. But I like them, so on my bike they stay.
#9
Vintage French Bike Fan
Join Date: Jun 2007
Location: Portland, OR
Posts: 628
Bikes: Peugeot UO-8, Peugeot 80's 12 spd
Likes: 0
Liked 0 Times
in
0 Posts
Well when it comes to bars there are only a few things that distinguish them from each other: how sturdy they are, how light they are, whether the curve feels good, whether they are attractive or not. In my book the difference between a great bard and a good one is in the shades of grey in each of those categories. In my book the CTA bars rate pretty high on all counts. So I'd be happy with them, and ride them with pride.
Karl
Karl
#10
Stop reading my posts!
good info,thanks, but is it CTA or LTA (for La Technique Avion)?
If it's "C" what's the C stand for?
If it's "C" what's the C stand for?
#11
Vintage French Bike Fan
Join Date: Jun 2007
Location: Portland, OR
Posts: 628
Bikes: Peugeot UO-8, Peugeot 80's 12 spd
Likes: 0
Liked 0 Times
in
0 Posts
#12
Newbie
Join Date: Jun 2010
Posts: 1
Likes: 0
Liked 0 Times
in
0 Posts
There's a pair on ebay now...see item number 170500073047......regards
i picked these bars up at the local co-op for my '74 grand prix, but have liked them so much that i have swapped them out to my new centurion and passed the grand prix off with the centurion's bars. They're the right width with a decent amount of drop and plenty of bar coming back off the curve to grab onto when climbing. Sadly, i don't recognize the brand name, but hopefully one of y'all can help me out.
Here are pics of the engravings:
what i can read:
Drive side - la bonneville / iton 27190
cta
la technique avion
appliquee
aux 2 roues
france
non-drive side - crown above lions
Here are pics of the engravings:
what i can read:
Drive side - la bonneville / iton 27190
cta
la technique avion
appliquee
aux 2 roues
france
non-drive side - crown above lions
#13
curmudgineer
Join Date: Dec 2009
Location: Chicago SW burbs
Posts: 4,417
Bikes: 2 many 2 fit here
Liked 112 Times
in
70 Posts
Definitely CTA...
My 89 Versailles has CTA bars & stem, no mistaking the logo on the stem; for that matter the catalogue says CTA: https://cyclespeugeot.com/images/1989_Peugeot_9.jpg
...unless there is a ripoff LTA brand in France!
My 89 Versailles has CTA bars & stem, no mistaking the logo on the stem; for that matter the catalogue says CTA: https://cyclespeugeot.com/images/1989_Peugeot_9.jpg
...unless there is a ripoff LTA brand in France!
#14
Newbie
Hello all,
I come late on this subject, my grand-father did some of these "bars" for "CTA" in la Bonneville sur Iton in France (Normandy - you can see the heraldic of Normandy with William the Conqueror leopard).
CTA means "Cintrage de tube dans ses applications". That was a small brand and handcrafted some armbars mostly for Peugeot.
Excuse my english, note my mother tongue.
I come late on this subject, my grand-father did some of these "bars" for "CTA" in la Bonneville sur Iton in France (Normandy - you can see the heraldic of Normandy with William the Conqueror leopard).
CTA means "Cintrage de tube dans ses applications". That was a small brand and handcrafted some armbars mostly for Peugeot.
Excuse my english, note my mother tongue.
Likes For jacktheslepp:
#16
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,218
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Liked 1,111 Times
in
716 Posts
Thanks. Small world. That helps us out a bunch. It looks like your Grandfather and his coworkers did good work.
Do you know if they did anything else, or just handle bars?
Do you know if they did anything else, or just handle bars?
#18
Senior Member
Join Date: Apr 2020
Posts: 331
Bikes: '68 Masi Special road, Grail bike
Likes: 0
Liked 70 Times
in
58 Posts
be advised: as stated b4 those bars are FRENCH! the clamping dia. is smaller than
the stems that would have come on your Grand Prix or Centurion. cast al-alloy parts
like stems have NO elasticity. exact size match for bar to stem is necessary.
the stems that would have come on your Grand Prix or Centurion. cast al-alloy parts
like stems have NO elasticity. exact size match for bar to stem is necessary.
#19
Newbie
Join Date: May 2020
Posts: 1
Likes: 0
Liked 0 Times
in
0 Posts
Jacktheslepp
Hello all,
I come late on this subject, my grand-father did some of these "bars" for "CTA" in la Bonneville sur Iton in France (Normandy - you can see the heraldic of Normandy with William the Conqueror leopard).
CTA means "Cintrage de tube dans ses applications". That was a small brand and handcrafted some armbars mostly for Peugeot.
Excuse my english, note my mother tongue.
I come late on this subject, my grand-father did some of these "bars" for "CTA" in la Bonneville sur Iton in France (Normandy - you can see the heraldic of Normandy with William the Conqueror leopard).
CTA means "Cintrage de tube dans ses applications". That was a small brand and handcrafted some armbars mostly for Peugeot.
Excuse my english, note my mother tongue.
I picked up these bars somewhere and put them on my 1988 Vitus 979. I love them, their low drops make a very short trip for my right hand to hit the down tube shifters, they are from the same period, and I think they are most appropriate, not just being French- frame was manufactured in Saint-Etienne 365 miles from la Bonneville sur Iton) and aluminum, but because the stamping, “La technique Avion appliquee aux 2 roues...aviation technology applied to two wheels” as the Vitus’ aluminum frame tubes are bonded to the intersecting parts using technologies from France’s aerospace industry as well!
I’d like to know more about the factory in la Bonneville sur Iton. I looked on Google maps and it looks like a rather small village. It is supported by a railway, however, and it looks like there is a small industrial area near the tracks. Do you know where the factory was that your grandfather worked making these awesome handlebars? When and for how long did he work there? How many employees, what else did they manufacture by “CTA/tube bending in its applications”....airplane parts?
#20
Newbie
This thread is awesome! I really wondered what all that meant on my 1985 PGN 10 bars and now I know! Remarkable history! So cool.
#21
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,811
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Liked 577 Times
in
342 Posts
I am pretty sure my first post to this forum was a reply to a long dead thread. It seems to be a rite of passage. Welcome to Bike Forums!
__________________
www.rhmsaddles.com.
www.rhmsaddles.com.