Park Tools PPL-1 grease suitable for squeaky door hinges?
#1
High Plains Luddite
Thread Starter
Park Tools PPL-1 grease suitable for squeaky door hinges?
I have a few interior doors around the house that need their every-few-years lubrication. Thought I had some 3-in-1 oil or similar but I can't find it.
Then I spied my tube of Park Tools PPL-1 in the garage and I'm thinking it might work just fine.
Any thoughts?
Thanks, and sorry for the non-bicycle thread, but I figured you guys would know if anyone does.
PPL-1 PolyLube 1000™ Lubricant (Tube) | Park Tool
Then I spied my tube of Park Tools PPL-1 in the garage and I'm thinking it might work just fine.
Any thoughts?
Thanks, and sorry for the non-bicycle thread, but I figured you guys would know if anyone does.
PPL-1 PolyLube 1000™ Lubricant (Tube) | Park Tool
#2
ignominious poltroon
Join Date: Jan 2022
Posts: 4,141
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2281 Post(s)
Liked 3,503 Times
in
1,839 Posts
It is too thick. You need something like triflow. But that has PTFEs that you might not want in your house.
Graphite powder is safest (although don't inhale it).
Graphite powder is safest (although don't inhale it).
#3
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,224
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6330 Post(s)
Liked 4,923 Times
in
3,389 Posts
So what's the worst that can happen? It doesn't work and you get something else? Since it is a grease and might take awhile to flow where it's needed you probably should take the hinge off so it can be taken apart and grease wiped on all the surfaces that touch and move on another. Including the pin.
#4
Thread derailleur
Join Date: Mar 2004
Location: Glendora, CA
Posts: 667
Bikes: Croll '94 & Cannondale Supersix '15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 378 Post(s)
Liked 478 Times
in
275 Posts
On all my old or new hinges, I used the very thin Red Devil bicycle grease.
Going on four years now in this house and not a single squeaky hinge.
On old hinges, it required popping out the pin - a minor inconvenience.
I replaced some of those old ones (in my 45 year-old home), as those looked fairly scungey.
Going on four years now in this house and not a single squeaky hinge.
On old hinges, it required popping out the pin - a minor inconvenience.
I replaced some of those old ones (in my 45 year-old home), as those looked fairly scungey.
#5
High Plains Luddite
Thread Starter
#6
Full Member
Join Date: Jun 2022
Location: San Diego, California USA
Posts: 357
Bikes: 1974 Masi GC, 1982 Trek 728 (aka 720), 1992 Trek Multitrack 750
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 123 Post(s)
Liked 225 Times
in
142 Posts
Phil's Tenacious oil in for the win.
Do the hinges once and you'll probably never have to oil them again.
Do the hinges once and you'll probably never have to oil them again.
#7
Really Old Senior Member
Try wax. it won't migrate over time.
Likes For Bill Kapaun:
#8
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,488
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 1012 Post(s)
Liked 684 Times
in
423 Posts
Perhaps door hinges should have zerk fittings for easy relubrication. While I am it the same for wheel bearings on wheelbarrows. Then again, manufacturers might not want their products to last forever (unlike most of my vintage bike parts).
And, sure, use your Park grease - I do not see a downside.
And, sure, use your Park grease - I do not see a downside.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#9
Newbie
Join Date: Oct 2021
Location: B'ham, AL
Posts: 69
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Liked 94 Times
in
33 Posts
Will it work? Yes
Is it the ideal lubricant for door hinges? No
Will it cause your hinges to catch fire or otherwise cause harm to you or your family/friends/pets? No.
If it's all you have use it.
Is it the ideal lubricant for door hinges? No
Will it cause your hinges to catch fire or otherwise cause harm to you or your family/friends/pets? No.
If it's all you have use it.
#10
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,471
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,769 Times
in
2,565 Posts
Grandma used to use lard on her hinges.
I think park grease will work fine.
I think park grease will work fine.
#11
ignominious poltroon
Join Date: Jan 2022
Posts: 4,141
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2281 Post(s)
Liked 3,503 Times
in
1,839 Posts
Ever since I went over to waxing my door hinges, the incidence of ghost infestations and other haunted house sound effects has dropped to zero.
Waxing door hinges is easy, but success hinges upon first stripping the hinge of any residual oil, and exorsizing any mineral spirits that might be contaminating it.
Waxing door hinges is easy, but success hinges upon first stripping the hinge of any residual oil, and exorsizing any mineral spirits that might be contaminating it.
#13
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,954
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2629 Post(s)
Liked 1,979 Times
in
1,238 Posts
If the only tool you have is a hammer, everything looks like a nail.
Fortunately for me, I have a dozen bottles of different chain lubes laying around the house.
Fortunately for me, I have a dozen bottles of different chain lubes laying around the house.
#14
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,471
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,769 Times
in
2,565 Posts