Mavic Ksyrium Elites??
#1
Mavic Ksyrium Elites??
Hey all. What's your opinions on the Ksyrium Elites for trainers? I've read quite a few reviews online and the opinions seem to fall mostly on both ends of the spectrum, from "stay away" to "great wheels". Does anyone have any personal experience with them? Thanks!
#2
Senior Member
For trainers? Not sure wheels matter?
#4
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,635
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Liked 9,565 Times
in
4,422 Posts
#5
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,853
Bikes: Merlin Cyrene, Nashbar steel CX
Liked 1,612 Times
in
1,060 Posts
#6
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,635
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Liked 9,565 Times
in
4,422 Posts
I suspect OP means training = not racing wheels, not for an indoor trainer.
Likes For datlas:
#7
serious cyclist
Join Date: Apr 2009
Location: Austin
Posts: 21,147
Bikes: S1, R2, P2
Liked 3,685 Times
in
2,028 Posts
#8
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 4,140
Bikes: Trek FX 2, Cannondale Synapse x2, Cannondale CAAD4, Santa Cruz Stigmata 3
Liked 1,699 Times
in
1,166 Posts
I think it depends on one's perspective. My first wheelset upgrade was from Mavic Aksium to Ksyrium Elite, so there was a noticeable (almost 1/4 kg) weight reduction. What else are you comparing them to?
My Ksyrium Elite wheels have stayed true and trouble free for 4.5 years of riding until I upgrade to CF wheels last year, although I must note that the roads in my area are above average. But they are not as aero, wide, or light as contemporary CF wheels. The freehub is audible but not aggravatingly loud. They do not require rim tape. Mine came with Mavic tire levers which double as nipple wrenches (on their other end); I don't know if regular nipple wrenches would work?
My Ksyrium Elite wheels have stayed true and trouble free for 4.5 years of riding until I upgrade to CF wheels last year, although I must note that the roads in my area are above average. But they are not as aero, wide, or light as contemporary CF wheels. The freehub is audible but not aggravatingly loud. They do not require rim tape. Mine came with Mavic tire levers which double as nipple wrenches (on their other end); I don't know if regular nipple wrenches would work?
Last edited by SoSmellyAir; 11-01-23 at 08:51 PM.
#9
Senior Member
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,886
Bikes: Too many bikes, too little time to ride
Liked 555 Times
in
381 Posts
I think they're nice wheels for their time. If you can get them used for cheap, why not. I think they'd be tricky to true or rebuild. Keep in mind they've been around for a while so there are different iterations out in the used market. The newer ones are nicer, obviously.
#10
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 4,140
Bikes: Trek FX 2, Cannondale Synapse x2, Cannondale CAAD4, Santa Cruz Stigmata 3
Liked 1,699 Times
in
1,166 Posts
I think they're nice wheels for their time. If you can get them used for cheap, why not. I think they'd be tricky to true or rebuild. Keep in mind they've been around for a while so there are different iterations out in the used market. The newer ones are nicer, obviously.
#11
Senior Member
#12
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 26,249
Liked 10,163 Times
in
4,938 Posts
I had a set. Kept pulling the nipples out of the rim. Mavic replaced the rear rim twice for free but said no the third time. I paid for a new rim and sold them. I am hard on wheels.
#13
your god hates me
Join Date: Apr 2006
Posts: 4,630
Bikes: 2016 Richard Sachs, 2010 Carl Strong, 2006 Cannondale Synapse
Liked 1,458 Times
in
787 Posts
I owned two pair that were both new in 2006, and could not kill them. Not for lack of trying.
I hated that the spokes were proprietary, that the tools to work on the spokes and the hubs were proprietary, and that if you didn't clean & lube the rear hub regularly they would succumb to the dreaded "Mavic shreik"
I loved that they did not require rim tape, and that tires were relatively easy to get on/off them.
Ultimately I sold off both pairs, one just a couple of months ago. If you can find a true, used pair for <$100 it wouldn't be the worst purchase you'll make.
I hated that the spokes were proprietary, that the tools to work on the spokes and the hubs were proprietary, and that if you didn't clean & lube the rear hub regularly they would succumb to the dreaded "Mavic shreik"
I loved that they did not require rim tape, and that tires were relatively easy to get on/off them.
Ultimately I sold off both pairs, one just a couple of months ago. If you can find a true, used pair for <$100 it wouldn't be the worst purchase you'll make.
#14
Thank you for all the replies. Pardon me, please, for injecting confusion into my inquiry with my reference to "trainers". I see now how that can cause confusion. What I meant is that I am looking for wheels for everyday road "training". I ride about 6 miles every other day at a hard pace.
Now, I think I have to change up my inquiry. The reason is that I live in a desert area and at this time of the year there's quite a bit of landscaping going on, which results in an abundance of bougainvillea thorns being strewn across our local roads. This causes a significant puncture hazard. In the last week my son's bike suffered two punctured tubes and I had one. So, I think that I should be looking at tubeless wheels, which I know almost nothing about. So, my questions now are as follow:
1. Are tubeless a remedy to "thorny" roads?
2. Are tubeless tires something I can install with relative ease, or will I have to go to my LBS for installation?
3. I can get a pair of Campy Shamal "two way" tires, which take tubeless. But they're really expensive. I have Zondas now, and they're great. I can only imagine the Shamals are very good.
4. Finally - and thanks for your patience - I run 105's. Do Shamals typically come with rear hubs that are compatible for 105's, or do I have to get a special set-up for that?
You guys are great and I thank you for all the kind info you grant to this confused newbie!
Now, I think I have to change up my inquiry. The reason is that I live in a desert area and at this time of the year there's quite a bit of landscaping going on, which results in an abundance of bougainvillea thorns being strewn across our local roads. This causes a significant puncture hazard. In the last week my son's bike suffered two punctured tubes and I had one. So, I think that I should be looking at tubeless wheels, which I know almost nothing about. So, my questions now are as follow:
1. Are tubeless a remedy to "thorny" roads?
2. Are tubeless tires something I can install with relative ease, or will I have to go to my LBS for installation?
3. I can get a pair of Campy Shamal "two way" tires, which take tubeless. But they're really expensive. I have Zondas now, and they're great. I can only imagine the Shamals are very good.
4. Finally - and thanks for your patience - I run 105's. Do Shamals typically come with rear hubs that are compatible for 105's, or do I have to get a special set-up for that?
You guys are great and I thank you for all the kind info you grant to this confused newbie!
Likes For ArgoMan:
#15
Senior Member
Thank you for all the replies. Pardon me, please, for injecting confusion into my inquiry with my reference to "trainers". I see now how that can cause confusion. What I meant is that I am looking for wheels for everyday road "training". I ride about 6 miles every other day at a hard pace.
Now, I think I have to change up my inquiry. The reason is that I live in a desert area and at this time of the year there's quite a bit of landscaping going on, which results in an abundance of bougainvillea thorns being strewn across our local roads. This causes a significant puncture hazard. In the last week my son's bike suffered two punctured tubes and I had one. So, I think that I should be looking at tubeless wheels, which I know almost nothing about. So, my questions now are as follow:
1. Are tubeless a remedy to "thorny" roads?
2. Are tubeless tires something I can install with relative ease, or will I have to go to my LBS for installation?
3. I can get a pair of Campy Shamal "two way" tires, which take tubeless. But they're really expensive. I have Zondas now, and they're great. I can only imagine the Shamals are very good.
4. Finally - and thanks for your patience - I run 105's. Do Shamals typically come with rear hubs that are compatible for 105's, or do I have to get a special set-up for that?
You guys are great and I thank you for all the kind info you grant to this confused newbie!
Now, I think I have to change up my inquiry. The reason is that I live in a desert area and at this time of the year there's quite a bit of landscaping going on, which results in an abundance of bougainvillea thorns being strewn across our local roads. This causes a significant puncture hazard. In the last week my son's bike suffered two punctured tubes and I had one. So, I think that I should be looking at tubeless wheels, which I know almost nothing about. So, my questions now are as follow:
1. Are tubeless a remedy to "thorny" roads?
2. Are tubeless tires something I can install with relative ease, or will I have to go to my LBS for installation?
3. I can get a pair of Campy Shamal "two way" tires, which take tubeless. But they're really expensive. I have Zondas now, and they're great. I can only imagine the Shamals are very good.
4. Finally - and thanks for your patience - I run 105's. Do Shamals typically come with rear hubs that are compatible for 105's, or do I have to get a special set-up for that?
You guys are great and I thank you for all the kind info you grant to this confused newbie!
You’ll probably need a track pump with a reservoir to inflate them, and they’re quite tight to get on the rim but certainly achieveable at home. I recommend a tyreglider for installing them. I find it MUCH better than normal levers for TL tyres and I can put most normal tubes clinchers on by hand.
#16
Senior Member
Join Date: Jul 2006
Location: Lebanon (Liberty Hill), CT
Posts: 8,758
Bikes: CAAD 12, MASI Gran Criterium S, Colnago World Cup CX & Guru steel
Liked 1,429 Times
in
835 Posts
I have had several Ksyrium Elite clinchers for many years and they have served me well. Once hit a pot hole with front and rear at approx 40 mph on a downhill. They did not go out of true. These days (last 5 yrs) I have been running Ksyrium Elite USTs and they have been awesome.
Likes For bruce19:
#17
I don't know.
Join Date: May 2003
Location: South Meriden, CT
Posts: 2,211
Bikes: '90 B'stone RB-1, '92 B'stone RB-2, '89 SuperGo Access Comp, '03 Access 69er, '23 Trek 520, '14 Ritchey Road Logic, '09 Kestrel Evoke, '08 Windsor Tourist, '17 Surly Wednesday, '89 Centurion Accordo, '15 CruX, '17 Ridley X-Night, '89 Marinoni
Liked 1,036 Times
in
529 Posts
I have two sets of Ksyrium Elites, the older ones (circa 2009) with 5000 maintenance free miles, and the newer ones with about 1000 miles. The newer ones (circa 2016) dented on a 40 mph downhill pothole, but I was able to remove the dent and true them.
Likes For RB1-luvr:
#18
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 4,140
Bikes: Trek FX 2, Cannondale Synapse x2, Cannondale CAAD4, Santa Cruz Stigmata 3
Liked 1,699 Times
in
1,166 Posts
As someone who is reasonably adept at installing clincher tires and tubes, and just recently went tubeless (on a gravel bike) for the first time, I would say that tubeless tires are a little harder to mount (because they are generally tighter) and a bit more involved to setup but certainly doable by oneself, especially if one has a compressor. The last generation of Ksyrium Elite wheels (i.e., the UST version) are tubeless and do not require rim tape, so that is one less variable to deal with for a tubeless setup.