Greetings from Chicago
#1
Newbie
Thread Starter
Join Date: Feb 2024
Location: Chicago
Posts: 10
Bikes: Motobecane Mirage, Specialized Allez Comp
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
Greetings from Chicago
Hi all! I am from Chicago and am fairly new to cycling and repairing bikes. I started cycling a a couple years ago when I got a Specialized Allez Comp from a friend. Even more recently I have become completely obsessed with working on bikes after a friend found an old Motobecane Mirage in an alley. He works as a bike mechanic and wasn't interested in working on it so I took it and committed myself to restoring it. I cleaned it up, changed the old cottered crank and bottom bracket to a new GXP configuration and it is my new daily rider. I also finally, with my new found knowledge and enthusiasm for repairing bikes, fixed up a bike I inherited from my grandfather. It is some old threespeed he got from K-Mart in the 70s and it had nothing but loose ball bearings in the bottom bracket.
I've really enjoyed working on bikes recently as it has been a very helpful and sanity preserving activity while I complete my dissertation. I'm very interested in fixing up old road bikes and giving them new life. I also have lots of questions and I will benefit greatly from the collected wisdom here. Long time reader, first time poster.
Best,
T
I've really enjoyed working on bikes recently as it has been a very helpful and sanity preserving activity while I complete my dissertation. I'm very interested in fixing up old road bikes and giving them new life. I also have lots of questions and I will benefit greatly from the collected wisdom here. Long time reader, first time poster.
Best,
T
Likes For eldercycling:
#2
1991 PBP Anciens
Join Date: Nov 2009
Location: Elburn, Illannoy
Posts: 653
Bikes: 1954 Robin Hood, 1964 Dunelt, 1968 Raleigh Superbe, 1969 Robin Hood, 197? Gitane, 1973 Raleigh SuperCourse, 1981 Miyata 710, 1990 Miyata 600GT, 2007 Rivendell Bleriot
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 74 Post(s)
Liked 355 Times
in
139 Posts
Hiya. I'm in Elburn and have been cycling and futzing with bikes since the early 60s.
#3
don't try this at home.
Join Date: Jan 2006
Location: N. KY
Posts: 5,976
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 530 Times
in
365 Posts
Check out the Park Tool repair guides. They explain the methods in detail, step-by-step. Some bike components aren't obvious at first, but are easy once the correct methods are followed.
For example, threadless headsets: the top cap is only for adjusting the bearing pre-load, but that's not obvious until I understood how it worked.
For example, threadless headsets: the top cap is only for adjusting the bearing pre-load, but that's not obvious until I understood how it worked.
#4
Newbie
Thread Starter
Join Date: Feb 2024
Location: Chicago
Posts: 10
Bikes: Motobecane Mirage, Specialized Allez Comp
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
Oh I already got the Big Blue Book of Bicycle Repair and have admired C. Calvin Jones' moustache on. youtube many many times.