Toe straps recommendations
#2
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 25,043
Bikes: Several, mostly not name brands.
Liked 3,675 Times
in
2,077 Posts
I like the MKS "Fit α Sprint" straps. They're the closest thing to the old Alfredo Binda straps I've found. The strap is leather, with a plastic mesh laminated in to reduce stretching under load (like the Bindas had). Nice stainless steel buckle.
https://www.amazon.com/MKS-Fit-Alpha.../dp/B002YQ44VO
https://www.amazon.com/MKS-Fit-Alpha.../dp/B002YQ44VO
Likes For JohnDThompson:
#3
Tinker-er
Join Date: Oct 2007
Location: Mid-Atlantic
Posts: 676
Bikes: 1956 Rudge Sports; 1983 Univega Alpina Uno; 1981 Miyata 610; 1973 Raleigh Twenty; 1994 Breezer Lightning XTR; V4 Yuba Mundo aka "The Schlepper"; 1987 Raleigh "The Edge" Mountain Trials; 1952 R.O. Harrison "Madison"; 1994 Concorde Aquila
Liked 424 Times
in
270 Posts
New ones. That's really it. Lately, I've been riding Christophes but I don't care about brand really, as long as the strap is in excellent condition and can hold more than my weight. Carry spares. I buy extra sets just to have around in case one breaks or I find is too worn and needs replacement.
#5
Newbie
not at all like Paké but have to say Hold Fast "FRS" straps on platform pedals are excellent esp for city riding / fg
#6
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,321
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,331 Times
in
2,788 Posts
I loved the old Bindas. Normals were fine. I wasn't strong enough to need the synthetic re-enforcement. Now I go to Portland Leather and have them cut me 1/2" strips of good cowhide. Treat it with Snowseal or the (probably slightly better) Obenau's Heavy Duty LP. Rivet to Zephal toestrap buckles with SS pop rivets. Use leather black if I want black ones.
My replacements work just as well, last roughly half the time of the Bindas and cost, by comparison, peanuts. (I do have a drill press which makes drilling out the rivets easier.) Those toestraps work hard. On fix gears. Always pulled tight and I'll pull as hard as my age allows going up steep hills.
My replacements work just as well, last roughly half the time of the Bindas and cost, by comparison, peanuts. (I do have a drill press which makes drilling out the rivets easier.) Those toestraps work hard. On fix gears. Always pulled tight and I'll pull as hard as my age allows going up steep hills.