Where does the “Made in Italy” sticker go on a Colnago?
#1
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,278 Times
in
828 Posts
Where does the “Made in Italy” sticker go on a Colnago?
I’m preparing a bike for Japan. Striped it. Epoxy primered it. Sanded then regular primered it, followed by high quality paint.
Greg Softely sent me the decals and tomorrow I’ll clear coat it.
in the decal kit was this Made In Italy decal
no idea where it should go.
Greg Softely sent me the decals and tomorrow I’ll clear coat it.
in the decal kit was this Made In Italy decal
no idea where it should go.
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
Likes For Robvolz:
#2
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 21,160
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy Viscount Aerospace Pro Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Liked 7,493 Times
in
4,191 Posts
Just because you have it doesn’t mean you have to apply it. My Colnago does not have one.
That being said, prolly low on the seat tube is a commonly used location.
That being said, prolly low on the seat tube is a commonly used location.
__________________
Likes For cb400bill:
Likes For mpetry912:
#4
Senior Member
My 1975 does not have one. Yours is newer and I certainly am no expert. I told Jack at Franklin to put original graphics on mine when he painted it for me . I think he would've put one on there if it belonged.
#5
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,657
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Liked 757 Times
in
463 Posts
Great idea! Doing decals on a Legnano this morning, a similar Made In Italy decal and I looked on a lot of old Legnano photos, did not see it. Maybe due to that exact placement. And I had tossed the decal, unused, in the trash. So, just now, dug it out and applied it. looks fine, and unobtrusive. Thanks!
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Likes For tiger1964:
#6
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,278 Times
in
828 Posts
Clear coating is about to commence
I think I’ll put that sticker on a giant Costco jar of Nutella Somebody gave me for the holidays.
One less blue bike!!!!
I think I’ll put that sticker on a giant Costco jar of Nutella Somebody gave me for the holidays.
One less blue bike!!!!
#7
Senior Member
Rob , that looks nice ! I like the yellow graphic with the purple.
Likes For Kabuki12:
#8
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,278 Times
in
828 Posts
I’ll admit
when I saw that Black Magic Bike Painting charges $1500 min for a paint job, I thought they were nuts, and they should be pumping out several frames a day
Then I did it myself. That was a lot of work. I’m sure less when you know what you are doing (I didn’t).
But, almost done. Looks good. I might not shell out for Black Magic, but I understand where the $$ and time goes.
Not bad
when I saw that Black Magic Bike Painting charges $1500 min for a paint job, I thought they were nuts, and they should be pumping out several frames a day
Then I did it myself. That was a lot of work. I’m sure less when you know what you are doing (I didn’t).
But, almost done. Looks good. I might not shell out for Black Magic, but I understand where the $$ and time goes.
Not bad
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
#9
Next we can debate if the nut is called a filbert or a hazelnut, but that’s a bit off topic.
Likes For Mr. Spadoni:
#10
Senior Member
That is beautiful , Rob.
Likes For Kabuki12:
#11
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,278 Times
in
828 Posts
I found the perfect place for the “made in Italy sticker”
Subtle but perfect!!!
Subtle but perfect!!!
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
#12
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,504
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,809 Times
in
3,892 Posts
#13
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 7,317
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Liked 2,397 Times
in
1,353 Posts
“Made in Italy” is redundant on a Colnago. Especially a lugged steel Colnago. If you don’t know it’s made in Italy, you don’t belong owning and riding it.
Likes For Robvolz:
#15
Senior Member
It is in essence advertising.
This is a liberating concept when it comes to refinishing's cosmetic decisions.
A current favourite frame has only this:
(which is a joke referential to this issue).
#16
Robert
That's some impressive work ! What brands of color and clear did you use?
That's some impressive work ! What brands of color and clear did you use?
Likes For Steel Charlie:
#17
Senior Member
Rob , I got a very nice paint job from Franklin Frames for a whole lot less than $1500 and it included a matching frame pump that Jack had (NOS) . I don't mean to take away from the work you did , it is beautiful and I could not even come close to that on my own. I just think that $1500 is a lot to spend on a paint job , unless there was some major frame repair or something. This was less than half that , Joe
This paint job is a couple years old and many road miles
This paint job is a couple years old and many road miles
Likes For satbuilder:
#19
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,504
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,809 Times
in
3,892 Posts
Maybe so but for the uninitiated and unwashed masses it may help spark something for them, pique their interest, get them on board, etc.
#20
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,561
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,590 Times
in
2,254 Posts
I’ll admit
when I saw that Black Magic Bike Painting charges $1500 min for a paint job, I thought they were nuts, and they should be pumping out several frames a day
Then I did it myself. That was a lot of work. I’m sure less when you know what you are doing (I didn’t).
But, almost done. Looks good. I might not shell out for Black Magic, but I understand where the $$ and time goes.
Not bad
when I saw that Black Magic Bike Painting charges $1500 min for a paint job, I thought they were nuts, and they should be pumping out several frames a day
Then I did it myself. That was a lot of work. I’m sure less when you know what you are doing (I didn’t).
But, almost done. Looks good. I might not shell out for Black Magic, but I understand where the $$ and time goes.
Not bad
I’d leave the Italy sticker off or put it at the very bottom of the down or seat tubes. I would NOT leave it on a 3Rensho lest you upset the spirit world.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
Likes For jdawginsc:
#21
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,657
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Liked 757 Times
in
463 Posts
Presumably, no harm in putting it on -- or leaving it off.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#22
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 6,358
Bikes: 1989 Cinelli Supercorsa
Liked 3,313 Times
in
1,992 Posts
Same with a Cinelli. But I enjoy looking down at the decal that the frame never originally had, placed there by me, prominently near the downtube shifters, looking at the Italian colors that remind me of my own heritage. For the same reasons I also like my bar end plugs, with their Continental-sounding "Cinelli - Milano."
Last edited by smd4; 05-01-24 at 12:06 PM.
#23
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 2,393
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Liked 2,278 Times
in
828 Posts
I used glue stick on the 3 Rensho. T’was a joke.
My hands got some of the color on them. I stopped by Trader Joe’s and the clerk (who I know) asked…
”did you just rob a bank or something?”
I didn’t understand. Then he added…
”did a dye pack go off?” As he pointed to all the purple on my left hand.
Yes, I found a run. It will polish out.
while I wish it had a long time to cure, gotta plane to catch.
What’s left of the paint on my hand
Let the fun begin
My hands got some of the color on them. I stopped by Trader Joe’s and the clerk (who I know) asked…
”did you just rob a bank or something?”
I didn’t understand. Then he added…
”did a dye pack go off?” As he pointed to all the purple on my left hand.
Yes, I found a run. It will polish out.
while I wish it had a long time to cure, gotta plane to catch.
What’s left of the paint on my hand
Let the fun begin
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
Likes For Robvolz:
#24
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 6,358
Bikes: 1989 Cinelli Supercorsa
Liked 3,313 Times
in
1,992 Posts
That may be the nicest "amateur" paint job I've ever seen on a bike.
Likes For smd4:
Likes For Robvolz: