Pay it forward...
04-28-24, 09:14 AM
#1751
I’ll take Box 1. I can put together a full crank out of this. PM incoming as soon as I’m done pancakes
Likes For Mr. Spadoni:
04-28-24, 10:09 AM
#1752
Full Member
I’d like #2 please. Pm incoming
Likes For notenoughdaylig:
05-19-24, 03:26 PM
#1754
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 3,192
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Liked 2,174 Times
in
1,271 Posts
Well folks I am done with the fussing around on a Mavic wheel. So I have all of the parts from the wheel with out the rim which was damaged beyond repair. Free for cost of shipping (probably less than $10) Smiles, MH
All of the bladed spokes, and the rim attaching nipples, and the brass nipples that are locked in place buy the aluminum nipples. And the hub. No cassette cause it didn't have one when I got it.
All of the bladed spokes, and the rim attaching nipples, and the brass nipples that are locked in place buy the aluminum nipples. And the hub. No cassette cause it didn't have one when I got it.
Likes For Mad Honk:
05-24-24, 04:32 PM
#1755
Senior Member
PM sent for the Mavic spokes and hub.
05-24-24, 04:48 PM
#1756
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 3,192
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Liked 2,174 Times
in
1,271 Posts
06-02-24, 03:38 PM
#1757
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 3,192
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Liked 2,174 Times
in
1,271 Posts
After reworking a set of brake levers yesterday I had a few items left over that I don't need to keep. Free just pay shipping, probably $5. Smiles, MH
Two lever blades, and two clamps with nuts.
Two lever blades, and two clamps with nuts.
Likes For Mad Honk:
06-07-24, 12:09 AM
#1759
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 3,132
Bikes: Gängl, Trek 938, Raleigh Professional, Paramount, Allez, Guerciotti, Specialized Stumpjumper, Trek 750, Miyata 1000 < Huffy
Liked 4,008 Times
in
1,618 Posts
Paging gugie , bulgie , scarlson , unterhausen ...
I've got a 1972 Paramount frame that is in need of some love and since I'm solidly into reducing the fleet right now, I wanted to see if any of you are interested in it. I can take some measurements...I think it is roughly 56cm squared...maybe a 56.5 or 57cm seat tube. The chrome is beautiful.
I bought this frameset a couple of years ago here on the forums, but within a few minutes of receiving it, saw that it had a crack in the rear DS dropout between the dropout and the chain stay. To be honest, I don't know if it is so much a crack as it is a 'separation' between the dropout and the stay, like it didn't get completely filled w/ braze, as the separation is at the joint. It was probably ridden like that for many years, as the front of the joint is brazed well and holds together.
It also has some goofiness on the seat tube, where something mashed it in a bit at the center, but that is probably an easy fix. This one is still plenty salvageable!
I just have so many projects and looking to free up some space. Please let me know if any of y'all are interested. I'd love for this to go to someone w/ some torch skills and give it some love. If this fits you, let's talk. Cost of shipping and it can be at your front door
I've got a 1972 Paramount frame that is in need of some love and since I'm solidly into reducing the fleet right now, I wanted to see if any of you are interested in it. I can take some measurements...I think it is roughly 56cm squared...maybe a 56.5 or 57cm seat tube. The chrome is beautiful.
I bought this frameset a couple of years ago here on the forums, but within a few minutes of receiving it, saw that it had a crack in the rear DS dropout between the dropout and the chain stay. To be honest, I don't know if it is so much a crack as it is a 'separation' between the dropout and the stay, like it didn't get completely filled w/ braze, as the separation is at the joint. It was probably ridden like that for many years, as the front of the joint is brazed well and holds together.
It also has some goofiness on the seat tube, where something mashed it in a bit at the center, but that is probably an easy fix. This one is still plenty salvageable!
I just have so many projects and looking to free up some space. Please let me know if any of y'all are interested. I'd love for this to go to someone w/ some torch skills and give it some love. If this fits you, let's talk. Cost of shipping and it can be at your front door
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
06-07-24, 04:13 AM
#1760
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,561
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,590 Times
in
2,254 Posts
Paging gugie , bulgie , scarlson , unterhausen ...
I've got a 1972 Paramount frame that is in need of some love and since I'm solidly into reducing the fleet right now, I wanted to see if any of you are interested in it. I can take some measurements...I think it is roughly 56cm squared...maybe a 56.5 or 57cm seat tube. The chrome is beautiful.
I bought this frameset a couple of years ago here on the forums, but within a few minutes of receiving it, saw that it had a crack in the rear DS dropout between the dropout and the chain stay. To be honest, I don't know if it is so much a crack as it is a 'separation' between the dropout and the stay, like it didn't get completely filled w/ braze, as the separation is at the joint. It was probably ridden like that for many years, as the front of the joint is brazed well and holds together.
It also has some goofiness on the seat tube, where something mashed it in a bit at the center, but that is probably an easy fix. This one is still plenty salvageable!
I just have so many projects and looking to free up some space. Please let me know if any of y'all are interested. I'd love for this to go to someone w/ some torch skills and give it some love. If this fits you, let's talk. Cost of shipping and it can be at your front door
I've got a 1972 Paramount frame that is in need of some love and since I'm solidly into reducing the fleet right now, I wanted to see if any of you are interested in it. I can take some measurements...I think it is roughly 56cm squared...maybe a 56.5 or 57cm seat tube. The chrome is beautiful.
I bought this frameset a couple of years ago here on the forums, but within a few minutes of receiving it, saw that it had a crack in the rear DS dropout between the dropout and the chain stay. To be honest, I don't know if it is so much a crack as it is a 'separation' between the dropout and the stay, like it didn't get completely filled w/ braze, as the separation is at the joint. It was probably ridden like that for many years, as the front of the joint is brazed well and holds together.
It also has some goofiness on the seat tube, where something mashed it in a bit at the center, but that is probably an easy fix. This one is still plenty salvageable!
I just have so many projects and looking to free up some space. Please let me know if any of y'all are interested. I'd love for this to go to someone w/ some torch skills and give it some love. If this fits you, let's talk. Cost of shipping and it can be at your front door
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
06-07-24, 10:43 AM
#1761
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 3,132
Bikes: Gängl, Trek 938, Raleigh Professional, Paramount, Allez, Guerciotti, Specialized Stumpjumper, Trek 750, Miyata 1000 < Huffy
Liked 4,008 Times
in
1,618 Posts
06-15-24, 05:03 PM
#1762
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 3,192
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Liked 2,174 Times
in
1,271 Posts
Well folks,
I promised to start cleaning up around here, and these were hanging around on my desk for at least three months. I have paired the holders with a couple of brake blocks from the Kool Stop inventory. There is some assembly required that need an Allen wrench to complete. Cost of shipping. (The two cards of blocks are $50 retail, so this is a deal). PM me Smiles, MH
Two pairs of brake block holders and the KS pads for them.
I promised to start cleaning up around here, and these were hanging around on my desk for at least three months. I have paired the holders with a couple of brake blocks from the Kool Stop inventory. There is some assembly required that need an Allen wrench to complete. Cost of shipping. (The two cards of blocks are $50 retail, so this is a deal). PM me Smiles, MH
Two pairs of brake block holders and the KS pads for them.
Likes For Mad Honk:
06-15-24, 05:39 PM
#1763
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 3,123
Bikes: Panasonic PT-4500, Miele Touring and Batavus Pro
Liked 2,486 Times
in
1,462 Posts
Can I sign up for the pads?
06-17-24, 07:06 PM
#1764
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 3,123
Bikes: Panasonic PT-4500, Miele Touring and Batavus Pro
Liked 2,486 Times
in
1,462 Posts
MH
Did you see my email? Just wondering if you got it.
Did you see my email? Just wondering if you got it.
06-18-24, 09:40 AM
#1765
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 3,123
Bikes: Panasonic PT-4500, Miele Touring and Batavus Pro
Liked 2,486 Times
in
1,462 Posts
Thank you!
Very grateful, just what do I owe you??
Very grateful, just what do I owe you??
06-26-24, 02:14 PM
#1766
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 3,123
Bikes: Panasonic PT-4500, Miele Touring and Batavus Pro
Liked 2,486 Times
in
1,462 Posts
pads arrived and will be installed within the week!
06-29-24, 05:00 PM
#1767
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 3,192
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Liked 2,174 Times
in
1,271 Posts
Next up is a box of French parts. Plenty of Mafac brake calipers with original straddle cables, and misc. parts off my work bench. If not claimed, off to the scrap yard. Smiles, MH
some good, some bad, and some jus plain ugly. But all useable in some way.
some good, some bad, and some jus plain ugly. But all useable in some way.
Likes For Mad Honk:
06-30-24, 11:55 AM
#1768
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 5,035
Bikes: A few too many
Liked 2,470 Times
in
1,295 Posts
Dave,
Very nice “French” gift box…….Any idea when the “Italian” stuff going to be cleared from your work bench?
Best, Ben
Mad Honk
Very nice “French” gift box…….Any idea when the “Italian” stuff going to be cleared from your work bench?
Best, Ben
Mad Honk
__________________
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
Likes For xiaoman1:
06-30-24, 01:30 PM
#1769
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,502
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,807 Times
in
3,891 Posts
PM incoming.
06-30-24, 04:35 PM
#1770
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 3,192
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Liked 2,174 Times
in
1,271 Posts
French stuff has been spoken for.
Ben,
I guess you want me to send you the fourteen seat posts that I found in this huge pile of stash?? Perhaps you have some psychic powers, cause I am putting together a bunch of Campy parts that are looking for a new home. Smiles, MH
Ben,
I guess you want me to send you the fourteen seat posts that I found in this huge pile of stash?? Perhaps you have some psychic powers, cause I am putting together a bunch of Campy parts that are looking for a new home. Smiles, MH
07-01-24, 02:27 AM
#1771
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 5,035
Bikes: A few too many
Liked 2,470 Times
in
1,295 Posts
Dave, you read my mind........
Best, Mooch
__________________
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
07-02-24, 10:28 AM
#1772
Senior Member
Join Date: Mar 2021
Location: SoCal
Posts: 2,920
Bikes: Cuevas Custom, Cimmaron, 1988 "Pinalized Rockma", 1984 Trek 510, Moulton custom touring, Raleigh Competition GS, Bridgestone Mb-2 & 3, 1980's Peugeot - US, City, & Canyon Express (6)
Liked 4,840 Times
in
2,265 Posts
Nothing too exciting
'72 Schwinn Varsity - Free for local pick-up in SoCal - rolling chassis, no bars, shifters or brake levers.
Raleigh Mixte - Shogun Prairie Breaker Pro - Miyata 110 - Frames from this post are all still available https://www.bikeforums.net/23178778-post1719.html -
Edit: Prelude sold locally, for lunch money, to C&V enthusiast who plans to rehab and get it back on the road
Schwinn Prelude - Also still available - https://www.bikeforums.net/23178769-post1718.html - Has not gotten any takers, I will be stripping parts off of this one soon - will give bike, whole, to anyone planning to re-hab
'72 Schwinn Varsity - Free for local pick-up in SoCal - rolling chassis, no bars, shifters or brake levers.
Raleigh Mixte - Shogun Prairie Breaker Pro - Miyata 110 - Frames from this post are all still available https://www.bikeforums.net/23178778-post1719.html -
Edit: Prelude sold locally, for lunch money, to C&V enthusiast who plans to rehab and get it back on the road
Last edited by SoCaled; 07-30-24 at 10:18 AM.
Likes For SoCaled:
07-30-24, 10:50 AM
#1773
Senior Member
Join Date: Mar 2021
Location: SoCal
Posts: 2,920
Bikes: Cuevas Custom, Cimmaron, 1988 "Pinalized Rockma", 1984 Trek 510, Moulton custom touring, Raleigh Competition GS, Bridgestone Mb-2 & 3, 1980's Peugeot - US, City, & Canyon Express (6)
Liked 4,840 Times
in
2,265 Posts
Edit: Frame has been claimed and sent to another BF member, I threw in most of the original parts (minus wheels) to help get the process of re-building along
1986 Allez SE (Jim Merz) -53cm Specialized says 54 CM - Frame/Fork w/headset & stuck stem & BB included
Pics of bike before it was broken down - https://www.bikeforums.net/g/album/32063486
Stem is stuck!
Dent/Rust on the seat stay - I was concerned, other smarter folks on BF, not so much - https://www.bikeforums.net/framebuil...ecoration.html
Dent on top tube
Did I mention it is Free?
Local pick-up only - Los Angeles
I have most of the parts that came off this frame - Shift levers are shot & missing crank caps/bolts - We can talk $ or trade if you need parts for the build
Other Frames still available for free pick-up - https://www.bikeforums.net/23178778-post1719.html
Shogun Prairie Breaker Pro
Raleigh Mixte
Miyata One Ten
Schwinn Varsity
1986 Allez SE (Jim Merz) -
Pics of bike before it was broken down - https://www.bikeforums.net/g/album/32063486
Stem is stuck!
Dent/Rust on the seat stay - I was concerned, other smarter folks on BF, not so much - https://www.bikeforums.net/framebuil...ecoration.html
Dent on top tube
Did I mention it is Free?
Local pick-up only - Los Angeles
I have most of the parts that came off this frame - Shift levers are shot & missing crank caps/bolts - We can talk $ or trade if you need parts for the build
Other Frames still available for free pick-up - https://www.bikeforums.net/23178778-post1719.html
Shogun Prairie Breaker Pro
Raleigh Mixte
Miyata One Ten
Schwinn Varsity
Last edited by SoCaled; 09-11-24 at 09:45 AM. Reason: size correction
Likes For SoCaled:
07-31-24, 08:34 AM
#1774
Full Member
CLAIMED
Padded shorts and a jersey.
Preferably these all go in one box and get shipped out but I'm happy to get rid of things individually.
Shorts are some medium Chinese brand, small aerotech designs, and small performance. I'm 160lbs with about a 31" waist and not washboard abs. The aerotech and Performance I remember being a bit snug.
Jersey is a medium but it's race fit. Small rip at the pocket.
Padded shorts and a jersey.
Preferably these all go in one box and get shipped out but I'm happy to get rid of things individually.
Shorts are some medium Chinese brand, small aerotech designs, and small performance. I'm 160lbs with about a 31" waist and not washboard abs. The aerotech and Performance I remember being a bit snug.
Jersey is a medium but it's race fit. Small rip at the pocket.
Last edited by The_Joe; 08-01-24 at 06:13 AM.
08-04-24, 01:17 PM
#1775
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 3,192
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Liked 2,174 Times
in
1,271 Posts
Trying to find the top of the workbench, and found three Shimano hubs that I won't use, but are either buildable or for parts. Cost of shipping probably under $10. PM me. Smiles, MH
Freehub models for parts or build up. 36 hole QR axles.
Freehub models for parts or build up. 36 hole QR axles.
