Flying Tire Irons
#51
Newbie
The tool exists for both purposes. I'd like to see you install a motorcycle tire by hand. And you may very well be able to install lots of tire by starting at the valve, but I promise you it is easier the other way.
#52
don't try this at home.
Join Date: Jan 2006
Location: N. KY
Posts: 5,977
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 530 Times
in
365 Posts
Back in 2010 (!) I posted a detailed thread on my tire mounting method. I still do it this way, and the tires are even tighter on the rims now.
How to: Tight fitting tire - easy mounting
The key to my method: This needs a tire lever with the correct shape and rounded ends. Pedro levers are perfect for it.
Lift less than an inch of bead at a time, slide the lever over a bit, and repeat. It's fast and effective.
I never use two levers when mounting a tire. Two are only needed to remove a tire.
How to: Tight fitting tire - easy mounting
The key to my method: This needs a tire lever with the correct shape and rounded ends. Pedro levers are perfect for it.
Lift less than an inch of bead at a time, slide the lever over a bit, and repeat. It's fast and effective.
I never use two levers when mounting a tire. Two are only needed to remove a tire.
Last edited by rm -rf; 05-07-24 at 10:33 AM.
#53
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,959
Bikes: 1989 Cinelli Supercorsa
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 3619 Post(s)
Liked 3,045 Times
in
1,841 Posts
I would definitely not enjoy mounting the last bit of tight bead next to the valve.
#54
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,981
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 141 Post(s)
Tagged: 1 Thread(s)
Quoted: 5922 Post(s)
Liked 2,806 Times
in
1,568 Posts
You start at the valve, I end there, and we both get the job done.
To those who are fine however they mount tires, no need to change. To those looking for a better way, it might be somewhere in this thread, so try one or a few till you succeed.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
Likes For FBinNY:
#55
Passista
Join Date: Jul 2005
Posts: 7,646
Bikes: 1998 Pinarello Asolo, 1992 KHS Montaña pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 747 Times
in
409 Posts
You say tomato, I say tomahto.....
You start at the valve, I end there, and we both get the job done.
To those who are fine however they mount tires, no need to change. To those looking for a better way, it might be somewhere in this thread, so try one or a few till you succeed.
You start at the valve, I end there, and we both get the job done.
To those who are fine however they mount tires, no need to change. To those looking for a better way, it might be somewhere in this thread, so try one or a few till you succeed.
#56
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,822
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 3777 Post(s)
Liked 5,741 Times
in
2,899 Posts
And that's why it's good to get in the habit of always starting opposite the valve. It's no more trouble to do it correctly.
#57
Senior Member
For those who just can't do it by hand, the KoolStop Bead Jack works OK and won't pinch the tube.
#58
Senior Member
Join Date: Apr 2016
Posts: 1,385
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 554 Post(s)
Liked 486 Times
in
373 Posts
I looked at the bead jack, looks interesting. I can see a possible advantage in being able to lift the bead, and then with your thumb, push it laterally onto the rim. Whereas with tire levers, especially plastic ones (which I prefer so to not damage the rim) which are thicker, that additional thickness is added to the diameter the tire bead needs to be stretched to, to get on the rim.
Likes For grumpus:
#59
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,822
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 3777 Post(s)
Liked 5,741 Times
in
2,899 Posts
Good to see the VAR tool available again.