Campagnolo Seat Posts
#1
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 873
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
Campagnolo Seat Posts
SOLD _ SOLD _ SOLD
Campagnolo Seat Post , 2 Bolt , NOTICE 26 mm is stated on the Post,,but the actual measuement is 24 mm ,See last Photo,,. standard Original length (see pictures) Has minor wear and some small scratches. functions as it should.
$46 .. PAYPAL ONLY .Shipped in the Lower 48 U.S.A. only.
Campagnolo Seat Post , 2 Bolt , NOTICE 26 mm is stated on the Post,,but the actual measuement is 24 mm ,See last Photo,,. standard Original length (see pictures) Has minor wear and some small scratches. functions as it should.
$46 .. PAYPAL ONLY .Shipped in the Lower 48 U.S.A. only.
Last edited by Manny66; 10-05-20 at 05:35 PM. Reason: Sold
#2
only here for the "LIKES"
Join Date: Nov 2004
Location: squirrel cage of anxiety and delusion
Posts: 479
Mentioned: 143 Post(s)
Tagged: 0 Thread(s)
Quoted: 1643 Post(s)
Liked 2,238 Times
in
1,051 Posts
i had a couple like that, and if i'm not mistaken, the machining on that takes it down into the ~23.8mm range. they were machined that way specifically to fit into Graftek frames. you might want to measure the diameter past the taper.
edit: here are a couple pics of one that i had:
edit: here are a couple pics of one that i had:
Last edited by hazetguy; 10-04-20 at 06:40 PM.
#3
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 873
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
i had a couple like that, and if i'm not mistaken, the machining on that takes it down into the ~23.8mm range. they were machined that way specifically to fit into Graftek frames. you might want to measure the diameter past the taper.
edit: here are a couple pics of one that i had:
edit: here are a couple pics of one that i had:
#4
Full Member
Join Date: Mar 2011
Location: North New Jersey
Posts: 190
Bikes: Specilized Roubaix, 71 Raleigh Professional, 74 Raliegh Intl, 74 Peugot PX-10, 82 Puegoet PSN, Olmo Competition , Schwinn High Sierra & Others
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Liked 59 Times
in
22 Posts
Hey, thanks for showing me how to store my posts with the wooden dowels!
Likes For LarryBSky:
#6
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 873
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts