Rebuilding a Vintage Peugeot
#1
Newbie
Thread Starter
Join Date: Jan 2024
Posts: 12
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Rebuilding a Vintage Peugeot
Hello all. Newbie here. I acquired an old Peugot road bike (1970s I think) for free about a year back with intentions of restoration. Well, after completely dismantling the entire bike (the easy part) I went off to school, hoping that I'd find time to rebuild. I did not. Now, however, I have a lot of time on my hands, and I want to jump back into this project. I was hoping that this community might give me some recommendations on how to get started back into this project; as I'm feeling a little overwhelmed at the moment.
I have an imgur post with images, but I can't post them because I'm so new.
The serial number is B4034971 if anybody can help me identify the model. Also it has a campagnolo rear derailleur (installed aftermarket I think), a simplex front derailleur, and wienmann brakes. Thank you for your time!
Edit: grammar
I have an imgur post with images, but I can't post them because I'm so new.
The serial number is B4034971 if anybody can help me identify the model. Also it has a campagnolo rear derailleur (installed aftermarket I think), a simplex front derailleur, and wienmann brakes. Thank you for your time!
Edit: grammar
Last edited by wrich; 01-29-24 at 09:19 PM.
#2
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,625
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3889 Post(s)
Liked 6,488 Times
in
3,211 Posts
Likes For SurferRosa:
#3
Newbie
Thread Starter
Join Date: Jan 2024
Posts: 12
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I forgot to mention that everything is clean! I do still have to degrease the bottom bracket and remove some minor corrosion from the threads. Although that I will take the beer into consideration.
#4
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,481
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 967 Post(s)
Liked 1,631 Times
in
1,047 Posts
Fun, fun, FUN... Welcome to the forum.
It will be interesting to see pics of your bike and progress. Some people make a big deal about the term restoration. I have had a few bikes that I originally intended to restore to vintage specs but gave up due to the expense. If ya dont have another bike to ride then just clean that baby up, get it fully sound, and ride, ride, ride.
One thing for sure is that an old Peu can give ya a real good ride...
It will be interesting to see pics of your bike and progress. Some people make a big deal about the term restoration. I have had a few bikes that I originally intended to restore to vintage specs but gave up due to the expense. If ya dont have another bike to ride then just clean that baby up, get it fully sound, and ride, ride, ride.
One thing for sure is that an old Peu can give ya a real good ride...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#5
Newbie
Thread Starter
Join Date: Jan 2024
Posts: 12
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Yeah I’m very much looking forward to the day I can take it out and cruise. I got the chance to ride my brothers vintage Canopus in Central Park once, and it was a dream.
#6
Newbie
Join Date: Nov 2022
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 0 Times
in
0 Posts
There exists somewhere a website with the old Peugeot catalogs. it's impossible to identify a bike like that through the number. best bet is to cross reference the pretty pictures with the components it's got. my Peugeot bike came with a simplex Rd, and weinmann brakes. turned out to be a 1973 bike. keep us updated brother!
#7
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,516
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,401 Times
in
2,058 Posts
#8
Really Old Senior Member
One problem with these older French bikes is they tend to be "non standard" re: many of their parts.
Just spend a minimal amount of $ spent to make it rideable.
If you want to pour a lot of $ into a bike, get something later than 1990.
Just spend a minimal amount of $ spent to make it rideable.
If you want to pour a lot of $ into a bike, get something later than 1990.
#9
Sr Member on Sr bikes
Here’s a bike assembly checklist from Park Tool
https://www.parktool.com/en-us/blog/...-bike-assembly
You can get a lot of instruction from that Park website. Also, there is a trove of info available, including maintenance, for old and new bikes on the Sheldon Brown website.
https://www.sheldonbrown.com/
Good luck and have fun. Post some pics for us.
Dan
Likes For _ForceD_:
#10
I don't know.
Join Date: May 2003
Location: South Meriden, CT
Posts: 2,015
Bikes: '90 B'stone RB-1, '92 B'stone RB-2, '89 SuperGo Access Comp, '03 Access 69er, '23 Trek 520, '14 Ritchey Road Logic, '09 Kestrel Evoke, '08 Windsor Tourist, '17 Surly Wednesday, '89 Centurion Accordo, '15 CruX, '17 Ridley X-Night, '89 Marinoni
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 317 Post(s)
Liked 853 Times
in
446 Posts
how are the wheels? are they true? are the bike's bearing surfaces smooth, not pitted? Looking forward to seeing it.
#11
...
Join Date: Oct 2021
Location: Whitestone and Rensselaerville, New York
Posts: 1,518
Bikes: Bicycles? Yup.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 482 Post(s)
Liked 1,593 Times
in
739 Posts
@wrich,
If your old Pug is like the ones I've worked on, you're going to need new:
Cables and housing, tires and tubes, and brake pads, budget about $100 for parts and about $15 for the cable cutters (pliers don't cut it).
Typically the bearings on the wheel hubs, crankset and steering headset need cleaning and new grease.
There are bike co-ops in NYC that can help with the work (and have the tools), plus your dedicated team of online opinionated curmudgeons to jiggle your elbow as needed.
If your old Pug is like the ones I've worked on, you're going to need new:
Cables and housing, tires and tubes, and brake pads, budget about $100 for parts and about $15 for the cable cutters (pliers don't cut it).
Typically the bearings on the wheel hubs, crankset and steering headset need cleaning and new grease.
There are bike co-ops in NYC that can help with the work (and have the tools), plus your dedicated team of online opinionated curmudgeons to jiggle your elbow as needed.
#12
Junior Member
I’ve just started doing the same (disassemble, clean, re-grease, replace parts if needed) to my 1975 Motobecane Grand Record. I’ve just ordered the tool for the Maillard five speed freewheel and crank puller for the T.A. Crank. Fun winter project!
#13
Senior Member
Join Date: Apr 2016
Posts: 1,236
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 501 Post(s)
Liked 435 Times
in
334 Posts
Be careful with those cranks: IME (of a handful of vintage TA cranksets) the threads aren't very strong and the tapers can stretch. I guess the metallurgy wasn't great, which is a shame because they look really cool.
#14
Junior Member
Thanks. Back in the day I had the crank arm puller for this crank and it worked perfectly. Unfortunately, the tool seems to have been lost, probably in one of my moves over the last 45 yrs. Looking on eBay for another one…..
#15
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,516
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,401 Times
in
2,058 Posts
If it is a lower end model with chrome steel wheels do yourself a favor and upgrade to aluminium.
#17
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,790
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 3,401 Times
in
1,935 Posts
May as well get new wheels instead of just rims. That way you'll have an English thread hub (or modern cassette freehub, depending on what you choose), and can run modern profiled sprockets with far better shifting performance than the old freewheels.
#18
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,790
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 3,401 Times
in
1,935 Posts
https://www.ebay.com/itm/35375646607...MAAOSwCxVhg-Lk
Likes For JohnDThompson:
#19
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,992
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6196 Post(s)
Liked 4,810 Times
in
3,318 Posts
When you say restoration, do you mean you want to keep it all with original or period correct components. Or just restore it to get it running? Or does restoration include upgrading it?
If you have pictures at imgur. Then just type the URL in the text of your message. If it balks when you try to post it, then take off the www or https:// and then change the .com to dotcom. Someone here will figure it out and post them for you.
If you have pictures at imgur. Then just type the URL in the text of your message. If it balks when you try to post it, then take off the www or https:// and then change the .com to dotcom. Someone here will figure it out and post them for you.
#20
Newbie
Thread Starter
Join Date: Jan 2024
Posts: 12
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Update
Hey guys, thank you for all your responses and input. After doing a little digging I think I can place my bike as 1985-1987 PH501. In response to some of suggestions and questions: I know at least one of the wheels is not true as it is missing two spokes. As for the other one, I can't say because I don't exactly know how to test that out. Ass more as money goes, I'm not really concerned as this is a bit of a personal project and I did get the back for free. With regards to the restoration, I'm hoping to reuse as many of the parts that came on the back, but obviously I know that there will be some limitations with the wheels. As I started to unpack the parts I realized that there were some parts that I haven't cleaned. As of now I'm in the process of removing corrosion/old grease from the front and rear end and the bottom bracket. One of the things I'm most concerned with at the moment is the bottom bracket. I would like to replace the caged bearings, but I am unsure of what the measurements are. Additionally, the races on the adjustable cup seem to have a little bit of corrosion and I don't know if they can be reused. I will post pictures when I am able to (I just have to make a few more posts). In the meantime, I will drop a partial link to my imgur page: //imgur.com/gallery/0SO05b8. Thanks again for all your advice and comments, your guys' welcome is more appreciated than you know!
#22
Newbie
Thread Starter
Join Date: Jan 2024
Posts: 12
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Here is a partial link to an imgur of the bearing/races: //imgur.com/a/EqbFL8h. As for the wheels I know for certain that the rear isn't true because it's missing two spokes. I can't say much for certain about the front wheel.
#24
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,516
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,401 Times
in
2,058 Posts
Hey guys, thank you for all your responses and input. After doing a little digging I think I can place my bike as 1985-1987 PH501. In response to some of suggestions and questions: I know at least one of the wheels is not true as it is missing two spokes. As for the other one, I can't say because I don't exactly know how to test that out. Ass more as money goes, I'm not really concerned as this is a bit of a personal project and I did get the back for free. With regards to the restoration, I'm hoping to reuse as many of the parts that came on the back, but obviously I know that there will be some limitations with the wheels. As I started to unpack the parts I realized that there were some parts that I haven't cleaned. As of now I'm in the process of removing corrosion/old grease from the front and rear end and the bottom bracket. One of the things I'm most concerned with at the moment is the bottom bracket. I would like to replace the caged bearings, but I am unsure of what the measurements are. Additionally, the races on the adjustable cup seem to have a little bit of corrosion and I don't know if they can be reused. I will post pictures when I am able to (I just have to make a few more posts). In the meantime, I will drop a partial link to my imgur page: //imgur.com/gallery/0SO05b8. Thanks again for all your advice and comments, your guys' welcome is more appreciated than you know!
#25
Senior Member
Join Date: Sep 2004
Location: Chicago area
Posts: 2,551
Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
Liked 582 Times
in
399 Posts
This ^^
I restored an old Motobecane Mirage and did this. One potential advantage of losing the cages is that you may be able to fit more balls. The OEM bottom bracket on my bike had 7 balls on each side... no wonder it wore out a couple crank axles. I was able to fit 11 balls on each side... more than a 50% increase.
I restored an old Motobecane Mirage and did this. One potential advantage of losing the cages is that you may be able to fit more balls. The OEM bottom bracket on my bike had 7 balls on each side... no wonder it wore out a couple crank axles. I was able to fit 11 balls on each side... more than a 50% increase.