Chipped Carbon Fork: Thoughts?
#1
The Brutally Handsome
Thread Starter
Join Date: Jun 2007
Location: Siberia
Posts: 508
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Chipped Carbon Fork: Thoughts?
I won a frameset on ebay from a large, reputable seller, but it arrived yesterday with a large chip in the carbon fork that was not disclosed nor shown in any photos. I'm currently working with the seller to figure out a solution but I wanted to get some impressions from you all how serious the damage looks. So, if you have any thoughts, I would appreciate hearing them!
Last edited by Sizzle-Chest; 03-05-15 at 08:22 PM.
#2
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,822
Bikes: Several, mostly not name brands.
Mentioned: 154 Post(s)
Tagged: 0 Thread(s)
Quoted: 3601 Post(s)
Liked 3,429 Times
in
1,949 Posts
Doesn't appear to be a structural problem, IMO, but the seller should have revealed it.
#3
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,857
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5859 Post(s)
Liked 2,702 Times
in
1,510 Posts
It looks 100% cosmetic, removing filler, but not any structural CF. So it calls for touch up and sealing. Easy fix. Now it's up to you and the seller to agree on what this is worth.
If the deal was only so-so, you might want to holdout for a discount. OTOH, if the deal was very good, it still is, so if you're offered an apology and enough to buy a coupla beers take it and call it a day.
If the deal was only so-so, you might want to holdout for a discount. OTOH, if the deal was very good, it still is, so if you're offered an apology and enough to buy a coupla beers take it and call it a day.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#4
The Brutally Handsome
Thread Starter
Join Date: Jun 2007
Location: Siberia
Posts: 508
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Also, I tried the tap test and there is a different sound directly on the damaged spot, but it seems related to the fact the surface is different, everywhere around it sounds the same.
Last edited by Sizzle-Chest; 03-05-15 at 08:43 PM.
#5
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,857
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5859 Post(s)
Liked 2,702 Times
in
1,510 Posts
Thanks for the info! So, is the filler the white stuff I'm seeing and what's its purpose?
Also, I tried the tap test and there is a different sound directly on the damaged spot, but it seems related to the fact the surface is different, everywhere around it sounds the same.
Also, I tried the tap test and there is a different sound directly on the damaged spot, but it seems related to the fact the surface is different, everywhere around it sounds the same.
I'm not a believer in the sound test, but it wouldn't work there anyway because of the change from tube to solid plug.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#7
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,123
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4224 Post(s)
Liked 3,917 Times
in
2,336 Posts
The solid insert is the drop out. So yes, most all forks use one.
To my eyes it looks like something got pushed up against the fork blade end and crushed the cosmetic coat. Did the fork have a block between the ends during shipping? I can see a situation where the fork wasn't damaged prior to packing but got so during shipping. Andy.
To my eyes it looks like something got pushed up against the fork blade end and crushed the cosmetic coat. Did the fork have a block between the ends during shipping? I can see a situation where the fork wasn't damaged prior to packing but got so during shipping. Andy.
#8
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,857
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5859 Post(s)
Liked 2,702 Times
in
1,510 Posts
There may be differences in the details of construction, but the basics are the same. You have a tube that ends in a solid dropout. At some point there has to be a transition.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#9
The Brutally Handsome
Thread Starter
Join Date: Jun 2007
Location: Siberia
Posts: 508
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
The solid insert is the drop out. So yes, most all forks use one.
To my eyes it looks like something got pushed up against the fork blade end and crushed the cosmetic coat. Did the fork have a block between the ends during shipping? I can see a situation where the fork wasn't damaged prior to packing but got so during shipping. Andy.
To my eyes it looks like something got pushed up against the fork blade end and crushed the cosmetic coat. Did the fork have a block between the ends during shipping? I can see a situation where the fork wasn't damaged prior to packing but got so during shipping. Andy.
I'm glad to hear you all feel it's cosmetic. That was my thought as well, but to be honest I have a tendency to use parts that should probably be retired, so I really wanted to hear if I was being reasonable.
#10
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,123
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4224 Post(s)
Liked 3,917 Times
in
2,336 Posts
Yes, the fork did have a plastic spacer in the drop-outs, and I'm actually certain the damage occurred prior to shipping as the chip is just barely visible as a small white mark in one of the side profile photos of the frame, which I only recognized after I received the frameset and went back to look over the photos.
I'm glad to hear you all feel it's cosmetic. That was my thought as well, but to be honest I have a tendency to use parts that should probably be retired, so I really wanted to hear if I was being reasonable.
I'm glad to hear you all feel it's cosmetic. That was my thought as well, but to be honest I have a tendency to use parts that should probably be retired, so I really wanted to hear if I was being reasonable.
Any way about it I'd just touch up the area with either simple enamel paint or an epoxy (ideally a black colored one), depending on the depth of the chips. Andy.
#11
The Brutally Handsome
Thread Starter
Join Date: Jun 2007
Location: Siberia
Posts: 508
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
The seller's mistake was not adequately disclosing the damage. Out of 27 photos in the listing, only one showed exactly this much of the damage, and that's after I cropped out the rest of the frame. Neither was it mentioned in the listing, though it does state "no major scratches".
#12
Senior Member
Join Date: Feb 2014
Location: Cabot, Arkansas
Posts: 1,538
Bikes: Lynskey Twisted Helix Di2 Ti, 1987 Orbea steel single speed/fixie, Orbea Avant M30, Trek Fuel EX9.8 29, Trek Madone 5 series, Specialized Epic Carbon Comp 29er, Trek 7.1F
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
The seller's mistake was not adequately disclosing the damage. Out of 27 photos in the listing, only one showed exactly this much of the damage, and that's after I cropped out the rest of the frame. Neither was it mentioned in the listing, though it does state "no major scratches".