How come OC rims never caught on?
#2
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,363
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,218 Times
in
2,365 Posts
Wheels tend to fall into the very conservative well of bicyclists. Triple butted spokes are a very good idea but mentioning using them can start a flame war almost as vehement as chain lube. I’ve had cause to review wheel building calculations for various hubs lately and the topic of off-center rims came up. It’s somewhat surprising how much the off-center rim changes the spoke tension differential. For a 135mm hub, changing from a center drilled rim to an off-center drilled rim decreases the drive side/nondrive side tension from 51% in the former to 70% in the later. I don’t know why people don’t take advantage of that improvement.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#3
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,391
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,974 Times
in
1,919 Posts
OC rim with a tall flanged hub could be something to invest in for durability. Maybe OC is limited by how narrow it can be positioned before it becomes a fatigue concern?
__________________
-Oh Hey!
-Oh Hey!
#4
Senior Member
Join Date: Oct 2010
Posts: 8,515
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3241 Post(s)
Liked 2,512 Times
in
1,510 Posts
Pardon my ignorance, but can it be used with a standard brake caliper? We're in the disc era now, so it might catch on.
Likes For njkayaker:
#6
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,363
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,218 Times
in
2,365 Posts
It can absolutely be used with a standard brake caliper. The A23 OC is rim brake rim. It can be used with disc, of course, but it is primarily for use with rim brakes. Ritchey which kind of pioneered the OC rim in modern times, was making them before disc brakes became a thing. Oddly, Ritchey doesn’t make the OC rim anymore.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#7
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,276
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 4259 Post(s)
Liked 1,361 Times
in
943 Posts
With centered rims, you only need to make one part. With off-centered rims, you need to make (and stock/distribute) two parts.
Likes For njkayaker:
#9
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,682
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 442 Times
in
315 Posts
When I had some 32 x 32 used Dura Ace 7900 hubs built up with Velocity A223 rims, I tried to get the rear in OC but could not obtain one in the polished finish that I wanted so I went with the symmetrical A23's both front and rear.
I have since built up a second similar set this one with 28 spoke Dura Ace 7850 rear and an 24 spoke Dura Ace 7800 front but this time using Velocity Quill rims. The rear is symetrical and not offset.
I would have liked to have spec'd the offset versions but these just did not seem to be available.
I have since built up a second similar set this one with 28 spoke Dura Ace 7850 rear and an 24 spoke Dura Ace 7800 front but this time using Velocity Quill rims. The rear is symetrical and not offset.
I would have liked to have spec'd the offset versions but these just did not seem to be available.
#10
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,276
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 4259 Post(s)
Liked 1,361 Times
in
943 Posts
I wonder if some rims will the higher-count "rear" wheel for the front (and use an even higher count for the rear).
It still might be significantly cheaper not to also produce the off-centered feature.
There must be a fairly strong disincentive not to produce OC rims as the norm (enough to offset the benefit).
I doubt it's because cyclists are "conservative". You'd have to really look closely to notice the off centered aspect.
#11
Senior Member
Join Date: May 2008
Location: Zang's Spur, CO
Posts: 9,083
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3375 Post(s)
Liked 5,517 Times
in
2,859 Posts
I have 4 bikes.
3 of them have been running Velocity O/C rims for years, on wheels I built myself.
(The 4th one is rarely ridden has has some of them thar store-bought wheels).
I swear by O/C rims.
3 of them have been running Velocity O/C rims for years, on wheels I built myself.
(The 4th one is rarely ridden has has some of them thar store-bought wheels).
I swear by O/C rims.
Likes For Shimagnolo:
#12
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,904
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2604 Post(s)
Liked 1,933 Times
in
1,213 Posts
So a combination of reducing SKU for big bike OEMs and low available + low demand for aftermarket (replacement) wheels?
#13
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,992
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6195 Post(s)
Liked 4,810 Times
in
3,318 Posts
Perhaps it was a solution for a problem that didn't affect most users.
Likes For Iride01:
#14
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,105 Times
in
1,369 Posts
I think that the #1 problem with inexpensive wheels is almost completely solved for most people by the DB spokes found on slightly better wheels, and extra things like OC rims and triple butted spokes are just not necessary enough on top of that.
I had a Diamondback MTB that came with oc rims about five years ago. This caused some problems with tubeless setup, because they put the depression in the rim on-center with the spoke holes and not centered between the sidewalls, and it had a hard time sealing up on the "short" side because there was no "shelf" to start the bead sliding into its channel. I have not seen other rims made this way nor can I think why they did it. It was a strangely unique problem.
I had a Diamondback MTB that came with oc rims about five years ago. This caused some problems with tubeless setup, because they put the depression in the rim on-center with the spoke holes and not centered between the sidewalls, and it had a hard time sealing up on the "short" side because there was no "shelf" to start the bead sliding into its channel. I have not seen other rims made this way nor can I think why they did it. It was a strangely unique problem.
__________________
Genesis 49:16-17
Genesis 49:16-17
#15
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,276
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 4259 Post(s)
Liked 1,361 Times
in
943 Posts
OC rims should also be more common for wheels that mostly serve the secondary market.
Last edited by njkayaker; 11-03-22 at 01:40 PM.
#16
Advanced Slacker
Join Date: Feb 2017
Posts: 6,210
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2762 Post(s)
Liked 2,537 Times
in
1,433 Posts
The mountain bike I bought recently (Ibis Ripley AF) came stock with off-center rims.
#17
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,276
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 4259 Post(s)
Liked 1,361 Times
in
943 Posts
Sure, OC rims exist. How common are they on mountain bikes? Maybe, they are already the norm there. If OC had a big advantage, they should already be common on mountain bikes.
Last edited by njkayaker; 11-03-22 at 01:51 PM.
#18
Advanced Slacker
Join Date: Feb 2017
Posts: 6,210
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2762 Post(s)
Liked 2,537 Times
in
1,433 Posts
I don’t know how common they are. it’s not something I really pay much attention to. I did not even realize these rims were off-center until I had had the bike for about a week.
#19
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,363
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,218 Times
in
2,365 Posts
Based on the few offerings around, they don’t appear to be significantly more expensive. $4 more from Velocity and about $10 for Kinlin.
Some disc wheel manufacturers are offering OC rims for front wheels since those didn’t need to be dished before discs.
With centered rims, you only need to make one part. With off-centered rims, you need to make (and stock/distribute) two parts.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#20
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,786
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times
in
1,934 Posts
I'm sure that's part of it. Until the mid-70s, standard wheels on British bikes were 32 hole front, 40 hole rear. Bean counters and the bike boom supply chain issues contributed to simplifying inventory by using 36 holes both front and rear.
#21
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,363
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,218 Times
in
2,365 Posts
There doesn't seem much conservatism in mountain bikers. If OC rims had a significant useful real world advantage, they would be the norm (or common) on mountain bikes. Kind of like how disk brakes came to be.
OC rims should also be more common for wheels that mostly serve the secondary market.
OC rims should also be more common for wheels that mostly serve the secondary market.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#22
With a mighty wind
Join Date: May 2015
Posts: 2,594
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 862 Times
in
490 Posts
I’ve built with them. No issues. They came stock on my mountain bike too.
The Kinlin rims I bought from bike hub store were offset and not advertised that way. Seems possible that a lot more out there are doing it, just not talking about it.
Seems that a lot of wider 30+mm mountain bike rims are offset until you get into the fat range.
I’ve never seen a road rim offset. I’ve heard of their existence.
The Kinlin rims I bought from bike hub store were offset and not advertised that way. Seems possible that a lot more out there are doing it, just not talking about it.
Seems that a lot of wider 30+mm mountain bike rims are offset until you get into the fat range.
I’ve never seen a road rim offset. I’ve heard of their existence.
#23
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,376
Bikes: Giant Defy, Giant Revolt
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 998 Post(s)
Liked 1,206 Times
in
692 Posts
I figured it was a matter of aerodynamics with the deeper carbon rims getting so popular, but you can still get OC rims for sure.
__________________
It's like riding a bicycle
It's like riding a bicycle
#25
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 17,965
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10425 Post(s)
Liked 11,900 Times
in
6,095 Posts
I've got Fulcrum wheels on 2 bikes. The Fulcrum Racing 5s are OCR, while the more expensive Racing 4s are not. *shrug*
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles