I need a new wheel!
#1
Full Member
Thread Starter
I need a new wheel!
This has been so frustrating. So earlier in the year I bought a wheelset from my friend. DT Swiss 350 hubs laced to Mavic open pros. Lightweight and durable enough for me. 32 spokes front and rear. One day I was riding in traffic and I was paying more attention to the cars behind me than what was in front of me. I looked in ahead and there was a curb that I wasn’t prepared for. I hopped up last second and my rear wheel clipped it. The rim was cracked. I’ve been looking for a wheel ever since. I don’t want another Narrow rim/wheel and my rear hub is still good. I’m not opposed to buying a rear wheel. Should I buy an H Plus Son Archetype and spokes and have it built? Pretty much all the wheels I find that are in my budget are tubeless. I run clinchers. Help!
#2
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,618
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10971 Post(s)
Liked 7,498 Times
in
4,194 Posts
1- just use the tubeless rim and run a tube. The police won't give you a citation if they find out.
2- sure use an Archetype rim. I have that rum for a couple of wheelsets- it is about as neutral as it gets, which is great.
2- sure use an Archetype rim. I have that rum for a couple of wheelsets- it is about as neutral as it gets, which is great.
#3
Senior Member
Join Date: Sep 2017
Posts: 7,893
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6975 Post(s)
Liked 10,975 Times
in
4,695 Posts
Have a good shop build a new wheel with your old hub. They can get a new rim and you will want them to use new spokes. The Archetype is fine, as is the H+Son Hydra. (The latter is tubeless-ready, but works fine with a tube and clincher tire.)
#4
Senior Member
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 6,888
Bikes: Trek Domane SLR 7 AXS, Trek CheckPoint SL7 AXS, Trek Emonda ALR AXS, Trek FX 5 Sport
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 769 Post(s)
Liked 1,748 Times
in
1,017 Posts
This has been so frustrating. So earlier in the year I bought a wheelset from my friend. DT Swiss 350 hubs laced to Mavic open pros. Lightweight and durable enough for me. 32 spokes front and rear. One day I was riding in traffic and I was paying more attention to the cars behind me than what was in front of me. I looked in ahead and there was a curb that I wasn’t prepared for. I hopped up last second and my rear wheel clipped it. The rim was cracked. I’ve been looking for a wheel ever since. I don’t want another Narrow rim/wheel and my rear hub is still good. I’m not opposed to buying a rear wheel. Should I buy an H Plus Son Archetype and spokes and have it built? Pretty much all the wheels I find that are in my budget are tubeless. I run clinchers. Help!
I have a Mavic Open Pro 32 that I used on a trainer that I have no use for any longer. It is laced to an Ultegra hub. Ping me if you are interested, just cover shipping an it is yours. It is in perfect condition, has never seen the actual road.
Edit: I just notice you are in S.Fla, I am in Jacksonville, so the shipping should not be too much. Also, if you just want the rim, I can take the hub off and just send you the rim.
__________________
Brian | 2023 Trek Domane SLR 7 AXS | 2023 Trek CheckPoint SL 7 AXS | 2016 Trek Emonda ALR | 2022 Trek FX Sport 5
Brian | 2023 Trek Domane SLR 7 AXS | 2023 Trek CheckPoint SL 7 AXS | 2016 Trek Emonda ALR | 2022 Trek FX Sport 5
Last edited by jaxgtr; 11-28-21 at 08:24 AM.
Likes For jaxgtr:
#5
Senior Member
HED Ardennes Plus... (Belgium Plus... for rim)