I hear The Bell Ringing
#2
So it goes.
Join Date: Apr 2014
Location: W. Tennessee
Posts: 991
Bikes: A few. Quite a few.
Liked 718 Times
in
282 Posts
It's a matter of personal preference of course. I like the Crane Suzu brass bells (they have copper and other flavors as well) and I mount them stem side. Sound nice, not too big and the striker lever can be rotated to any position so I can put it right where I want it. On a couple of my more modern bikes I use Spurycles on the handlebars.
__________________
Pohl's law: Nothing is so good that somebody, somewhere, will not hate it.
Pohl's law: Nothing is so good that somebody, somewhere, will not hate it.
Likes For PilotFishBob:
#3
Standard Member
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,350
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Liked 1,055 Times
in
524 Posts
It depends on your type of stem and handlebars. Some bells will not mount up to all types. What are you looking for in the way of looks and sound?
__________________
"Chim-chiminey, chim-chiminey, chim-chim cheroo"
"Chim-chiminey, chim-chiminey, chim-chim cheroo"
#4
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 28,131
Bikes: Too many to list here check my signature.
Liked 3,271 Times
in
1,651 Posts
I like the Crane Bells, in copper, the classic gold seemed to tarnish pretty fast. Lots of people put them on the stem, and with the YUGE ones I use there's plenty of room but it's a matter of taste and getting it to where it's easy to use.
This one I need to take my hand off the bar but it's a nice placement.
This one is close enough that I don't have to move my hand.
This one I need to take my hand off the bar but it's a nice placement.
This one is close enough that I don't have to move my hand.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#5
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,711
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Liked 2,326 Times
in
1,162 Posts
2023-02-02_06-36-50 on Flickr
121_PaTrek on Flickr
Tried it this way too.
061_PaTrek_Done_Bell on Flickr
and then there is the Hornit on the very left. Most effective with cars.
P1020528 on Flickr
Thanks for the reminder to get one for other bikes!
P1050280 on Flickr
121_PaTrek on Flickr
Tried it this way too.
061_PaTrek_Done_Bell on Flickr
and then there is the Hornit on the very left. Most effective with cars.
P1020528 on Flickr
Thanks for the reminder to get one for other bikes!
P1050280 on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Likes For SJX426:
#6
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 28,131
Bikes: Too many to list here check my signature.
Liked 3,271 Times
in
1,651 Posts
A little funny story about a bell, a few lifetimes ago when I worked in a bike shop the owner and I used ride in the mornings and meet up some other guys for their morning commute. One day we get to Dr Reindeer's (not real name) home and he isn't outside waiting. After a few minutes Joe tells me to ring my bell to let him know we're here. So I give it a few dings and wait a minute or two and ding it again. A few minutes later we hear his soft lilting South African voice "Trina Joe I'll be right down". He comes down and starts telling us about his dreama nd how he hears a bell ringing in the distance and suddenly realizes it us and not in the dream. We pushed hard that morning but he made to the office just in time. I miss those days but it's tough to support yourself working in a shop.
Bell on my souless Trek.
Bell on my souless Trek.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#7
Senior Member
[MENTION=159681]Bianchigirll[/MENTION] - cornering the market on Corsa Record era brake levers.
with a scandalous Medici. I have one but in the boring silver color, external rear brake cable routing.
with a scandalous Medici. I have one but in the boring silver color, external rear brake cable routing.
Likes For repechage:
#8
Tinker-er
Join Date: Oct 2007
Location: Mid-Atlantic
Posts: 692
Bikes: 1956 Rudge Sports; 1983 Univega Alpina Uno; 1981 Miyata 610; 1973 Raleigh Twenty; 1994 Breezer Lightning XTR; V4 Yuba Mundo aka "The Schlepper"; 1987 Raleigh "The Edge" Mountain Trials; 1952 R.O. Harrison "Madison"; 1994 Concorde Aquila
Liked 445 Times
in
280 Posts
I'll ring in with another endorsement for Crane Suzu bells. I've got a few of them. I just got the Crane E-Ne, which is almost identical to the Spurcycle, for my next build.
#9
On my commuter bikes I use an Incredibell Adjustabell mounted on right side of handlebars, below the rear brake lever. This way with hands on the hoods I can easily activate using my right thumb. It has a plastic strap similar concept to a large zip tie. Sound/volume is decent. You need to pull the strap tight with pliers so it really stays put on the bar tape. I have this setup on 3 bikes.
Likes For Steel1:
#10
Senior Member
Join Date: Nov 2022
Location: California's capital
Posts: 640
Bikes: Litespeed Firenze, Spot Acme, Specialzed S Works Pro Race, Davidson Stiletto, Colnago Superissimo
Liked 420 Times
in
244 Posts
I find bar mount better than stem because I can reach the bar bell (heh) more quickly and reliably. Put a Portland Design Works Alexander Graham on my city bike, because it's the cleanest mount I could find, replacing a 10mm stem spacer. It's attractive and sounds nice. But I've had times when I failed to ring the thing on short notice, so a cautious recommendation for it or any bell mounted there.
Here's a comparison of nine, including audio of each.
https://www.cyclingnews.com/features...king-and-more/
Here's a comparison of nine, including audio of each.
https://www.cyclingnews.com/features...king-and-more/
#11
Senior Member
I like Spurcycle and was part of the Kickstarter.
Spurcycle Original Vintage Bell
View at REI.com
View at Competitive Cyclist US
Check Amazon
The compact and stylish Spurcycle bell is made in the USA and comes with a guarantee for life. It uses a brass alloy dome and an aluminium hammer in a small package. The Spurcycle comes with two metal mounting loops that tighten down meaning the bell will fit most handlebars.
Audio Link:
Spurcycle Original Vintage Bell
View at REI.com
View at Competitive Cyclist US
Check Amazon
The compact and stylish Spurcycle bell is made in the USA and comes with a guarantee for life. It uses a brass alloy dome and an aluminium hammer in a small package. The Spurcycle comes with two metal mounting loops that tighten down meaning the bell will fit most handlebars.
Audio Link:
Last edited by OTS; 11-11-23 at 10:43 AM. Reason: add pic
Likes For OTS:
#12
Wheelman
Join Date: Aug 2021
Location: Putney, London UK
Posts: 1,024
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Liked 850 Times
in
418 Posts
+1 for Crane Suzu (5.5cm brass)
Here's the review I read on Amazon when I was looking around 2 years back:
.
A tiny bit OTT, but I basically agree, I've got 2 of them now (stem mounted).
Here's the review I read on Amazon when I was looking around 2 years back:
.
"Then you ring the bell and behold as the true magnificence is revealed; just one simple ping and a sphere of utter joy instantly grows around all within earshot as people turn to point actually smiling in delight (even in London), the Sirens of mythology would change their tune if only they knew, the reception desk at the gates of heaven has one of these. It resonates clear and long unlike any mere bicycle bell before ever dared to dream, I have found myself going down to the bike shed late at night just to check it wasn’t my imagination before climbing into bed with an inane grin then falling into a content deep slumber.
Yes you could buy cheaper or neater but surely you would missing out on this sonorous brass bliss ?"
.Yes you could buy cheaper or neater but surely you would missing out on this sonorous brass bliss ?"
A tiny bit OTT, but I basically agree, I've got 2 of them now (stem mounted).
Likes For mtbikerjohn:
#14
Senior Member
Vintage Reich bells. Especially the West Germany era made when they seemed to offer many cast designs and patterns. The mechanical mechanisms have a nice feel and sort of flywheel effect. Wonderful tones. I always mount aside the stem.
Likes For chain_whipped:
#15
Senior Member
Join Date: May 2013
Location: Kips Bay, NY
Posts: 2,244
Bikes: Ritchey Swiss Cross | Teesdale Kona Hot | Haro Extreme | Specialized Stumpjumper Comp | Cannondale F1000 | Shogun 1000 | Cannondale M500 | Norco Charger | Marin Muirwoods 29er | Shogun Kaze | Breezer Lightning
Liked 1,049 Times
in
513 Posts
On quill stems, I try to place the bells on the quill, knog oi on the stumpjumper and spurcycle on the shogun
#16
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,508
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Liked 6,820 Times
in
3,897 Posts
Here's an Incredibell mounted to a VO Grand Cru stem that has a bung which is cool for this, would rather not have it but didn't want to just use the screw to plug the hole so I mounted the bell which I had in stock for quite some time.
The older VO stems had no hole and they don't sell these anymore as there were quality issues.
The older VO stems had no hole and they don't sell these anymore as there were quality issues.
Likes For merziac:
#17
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,657
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Liked 757 Times
in
463 Posts
Whatever happened to bells that replaced one handlebar plug? OK, not the ideal location functionally, but a low-impact location on a C&V bike.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#19
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 28,131
Bikes: Too many to list here check my signature.
Liked 3,271 Times
in
1,651 Posts
I love those levers. Are you mocking Esmarelda's beautiful green paind and aerodynamic proficeny of internal cable routing?
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#20
Senior Member
Samples:
Note the different perimeter shapes. Reich also made attractive bells for larger manufacturers including Raleigh, Peugeot, Atala, etc.. I have another depicting a racing bike, the rider wearing a hairnet.
The St. Christophorus type was popular. Here's one mounted to the lid of a stein.
The trigger is one piece and has a tooth rack. Spring returns the trigger. The rack moves the gear that's connected to the rotor. The loose fitted hammer slides and taps the bell.
Note the different perimeter shapes. Reich also made attractive bells for larger manufacturers including Raleigh, Peugeot, Atala, etc.. I have another depicting a racing bike, the rider wearing a hairnet.
The St. Christophorus type was popular. Here's one mounted to the lid of a stein.
The trigger is one piece and has a tooth rack. Spring returns the trigger. The rack moves the gear that's connected to the rotor. The loose fitted hammer slides and taps the bell.
Last edited by chain_whipped; 11-11-23 at 08:28 PM.
#21
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,949
Bikes: 2024 A Homer Hilsen, 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Liked 3,588 Times
in
1,108 Posts
I'm in the Crane camp as well, for my Manhattan commuter I find the Crane RIten gets noticed more than the Suzue. It has North Road bars so the bell is on the left side just past the grip and brake lever clamp, where my thumb can reach the lever with minimal movement. The right side has a Sturmey Archer 8-speed shifter. I mount Suzues on the stem, right side.
I've embraced the natural brass oxidization, at least on this bike. My others are shiny.
I've embraced the natural brass oxidization, at least on this bike. My others are shiny.
__________________
2024 A Homer Hilsen, 1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
2024 A Homer Hilsen, 1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
Likes For ascherer:
#22
Senior Member
Join Date: Nov 2013
Location: Near Pottstown, PA: 30 miles NW of Philadelphia
Posts: 2,235
Bikes: 2 Trek Mtn, Cannondale R600 road, 6 vintage road bikes
Liked 1,180 Times
in
438 Posts
I have 3 of the old Reich bells (“ice cream truck bells”) and like them. People can hear them well as I approach. I also have a “clown horn” which works well and either brings a smile or stops traffic as they gaze up into the trees to see what that new bird species is.
My most recent bell, and current favorite, is just like the Crane above. Mine has no markings on it but is identical. I scrubbed the rest of the black paint off mine (and unbent it) then applied two coats of paste wax. Looks nice to me.
I mount mine on the stem as shown and mount it on whichever bike I’m riding that day. Easy to do. This bell is very loud and clear and has a long sustain. I only ride trails anymore so don’t need to warn vehicles. Works well on people, dogs and deer.
My most recent bell, and current favorite, is just like the Crane above. Mine has no markings on it but is identical. I scrubbed the rest of the black paint off mine (and unbent it) then applied two coats of paste wax. Looks nice to me.
I mount mine on the stem as shown and mount it on whichever bike I’m riding that day. Easy to do. This bell is very loud and clear and has a long sustain. I only ride trails anymore so don’t need to warn vehicles. Works well on people, dogs and deer.
Likes For Prowler:
#23
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,805
Bikes: It's complicated.
Liked 6,173 Times
in
2,401 Posts
part of my collection
I had a Crane bell on one of my bikes, but it seemed to scare the bejeesus out of half the people I used it on, whereas I often get compliments with the "tring" sound of my Reich bells. They do have a pleasant sound.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#24
Senior Member
Join Date: Nov 2022
Location: California's capital
Posts: 640
Bikes: Litespeed Firenze, Spot Acme, Specialzed S Works Pro Race, Davidson Stiletto, Colnago Superissimo
Liked 420 Times
in
244 Posts
Agree that trilling bells seem to communicate better/are less startling than single "ping" types, but are not well represented in the marketplace.
Likes For Rick_D:
#25
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,805
Bikes: It's complicated.
Liked 6,173 Times
in
2,401 Posts
And they're definitely C&V.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.