Need Viscount/Lambert crank fixing bolts
#1
aka Tom Reingold
Thread Starter
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,506
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7352 Post(s)
Liked 2,479 Times
in
1,439 Posts
Need Viscount/Lambert crank fixing bolts
I somehow lost the bolts that hold the cranks on the spindle on the Viscount I'm rebuilding for my wife. Anyone have a pair or know where to get them? They are very non-standard. Thanks.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#2
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,800
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,329 Times
in
837 Posts
Any clue regarding diameter & thread pitch? Automotive supply or general hardware, at least to get you going?
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#3
Senior Member
Join Date: Nov 2005
Posts: 5,768
Bikes: Cinelli, Paramount, Raleigh, Carlton, Zeus, Gemniani, Frejus, Legnano, Pinarello, Falcon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
Probably Whitworth. I got some years ago at a British motorcycle shop.
#4
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,194
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,296 Times
in
866 Posts
#5
Senior Member
Someone was selling a mint condition Viscount with spare parts on CL locally last week. But I checked the ad, and no BB bolts. Nice ad though!
https://tucson.craigslist.org/bik/3834290801.html
https://tucson.craigslist.org/bik/3834290801.html
#6
Senior Member
Join Date: Mar 2012
Location: Niagara Region, Canada
Posts: 1,455
Bikes: 1970s Alex Singer, 1960s Peugeot PX 10, 1960s Bertin C37, 1973 Carre Bertin C 37, 1972 Carlton Kermesse, 1981 Peugeot PX 14 Super Competition
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Liked 266 Times
in
157 Posts
noglider- Try these guys? British Tools and Fasteners. Located in NY state.
#7
Senior Member
Join Date: Oct 2010
Location: Minnesota- the frozen tundra
Posts: 1,946
Bikes: 1977 Raleigh Super Grand Prix, 1976 Gitane Tour de France
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Very tough to find, I sourced a set along with a bottom bracket spindle from a forum member when I did my sons Viscount.
Also keep in mind that Viscount and Lambert bottom bracket spindles are not interchangeable, they have different tapers. If it comes to that anyways.
Also keep in mind that Viscount and Lambert bottom bracket spindles are not interchangeable, they have different tapers. If it comes to that anyways.
#8
Senior Member
Join Date: Oct 2010
Location: Minnesota- the frozen tundra
Posts: 1,946
Bikes: 1977 Raleigh Super Grand Prix, 1976 Gitane Tour de France
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Oh, almost forgot. Try Randyjawa, he may be able to help.
#9
Death fork? Naaaah!!
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
#10
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,792
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3591 Post(s)
Liked 3,401 Times
in
1,935 Posts
Viscount used a couple different thread specs for their crank bolts:
Source: Sutherland's 4th Edition
Source: Sutherland's 4th Edition
#11
aka Tom Reingold
Thread Starter
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,506
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7352 Post(s)
Liked 2,479 Times
in
1,439 Posts
I didn't notice the replies to my original post until just now. Thank you, folks. top, does the offer still apply?
Will my English thread pitch gauge work to gauge Whitworth threads? My guess is that it will, but only if I can find it.
Will my English thread pitch gauge work to gauge Whitworth threads? My guess is that it will, but only if I can find it.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#12
Gone World Hepster
Join Date: Oct 2005
Location: Lincoln, NE
Posts: 1,211
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times
in
4 Posts
Tom, I can't remember the particular pitch, but if top doesn't come through, I've purchased the bolts a couple of different times in the last few years from Baxter Cycles in Marne, IA. They weren't cheap, but they worked. Baxter is a big web presence for vintage British motorcycles.
#13
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,792
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3591 Post(s)
Liked 3,401 Times
in
1,935 Posts
#14
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,194
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,296 Times
in
866 Posts
I measure the bolts from an Aerospace model as 7.89mm X 21.8tpi.
Last edited by dddd; 07-08-13 at 11:44 PM.
#15
Death fork? Naaaah!!
PM your shipping addy.
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
#16
aka Tom Reingold
Thread Starter
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,506
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7352 Post(s)
Liked 2,479 Times
in
1,439 Posts
Thank you, everyone else!
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#17
aka Tom Reingold
Thread Starter
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,506
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7352 Post(s)
Liked 2,479 Times
in
1,439 Posts
It turns out that a lot of nuts and bolts on this Viscount are Whitworth! I think the threads on the crank fixing bolts might be Whitworth, so I was surprised that it takes a 14mm socket. Thank you, top, very much indeed. As far as I can tell, there is no substitute for these bolts. I put the bike together, and my wife has ridden it. Overall, she likes it, and I can't tell you how significant that is. She doesn't like most bikes. There is work to do in order to make her fully satisfied. I will soon start a new thread about this bike.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#18
aka Tom Reingold
Thread Starter
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,506
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7352 Post(s)
Liked 2,479 Times
in
1,439 Posts
Speaking of taper on the crank spindle, if I try to put a TA crank on the Lambert spindle, is it likely to work?
And if the spindle spins freely, should I assume that the bearings are healthy and leave them alone?
And if the spindle spins freely, should I assume that the bearings are healthy and leave them alone?
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#19
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,194
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,296 Times
in
866 Posts
If the spindle spins smoothly, is what I'd call a conclusive sign of good health.
I'm still riding on ever-unserviced Viscount bb bearings, still smooth as silk.
These bearings are relatively oversized, so barring contamination should last a very long time.
My Viscount has a taper that is compatible with a Sugino swaged "3-arm style" crankset, but assuming yours is actually tapered, a test-fit with a TA crankset for fit and chainline seems like a good idea to me.
I'm still riding on ever-unserviced Viscount bb bearings, still smooth as silk.
These bearings are relatively oversized, so barring contamination should last a very long time.
My Viscount has a taper that is compatible with a Sugino swaged "3-arm style" crankset, but assuming yours is actually tapered, a test-fit with a TA crankset for fit and chainline seems like a good idea to me.
#20
Death fork? Naaaah!!
If your spindle IS tapered you should be all set. Hope it's not the UN-tapered version.
The crank bearings are pretty common (6006) and swapping them out is no big deal.
FWIW, don't count on the extractor threads on the crank arms being standard. I ripped the threads out of the drive-side on mine. Fortunately, that six-hole chainring gave fine purchase to a three-armed gear puller.
Top
The crank bearings are pretty common (6006) and swapping them out is no big deal.
FWIW, don't count on the extractor threads on the crank arms being standard. I ripped the threads out of the drive-side on mine. Fortunately, that six-hole chainring gave fine purchase to a three-armed gear puller.
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
#21
aka Tom Reingold
Thread Starter
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,506
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7352 Post(s)
Liked 2,479 Times
in
1,439 Posts
That's scary, top. I did have to use my extractor, and I managed not to damage anything.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
ThermionicScott
Bicycle Mechanics
12
10-05-15 01:38 PM
VeloBrox
Classic & Vintage
12
06-01-11 05:11 PM