mobilemail

Last week I saw what appeared to be an NOS helicomatic freewheel in capps bike shop in Topeka is. If you're looking for one outside of trade you might want to call them.

4Rings6Stars

Want:
- Campy 10 compatible lightweight wheelset (~1500g), prefer black/mostly black.
- Campy Ultra Torque compact carbon crankset. 170-172.5. Centaur or Chorus 10 would be ideal.
- Campy 10 35mm clamp or braze-on FD. Black, Centaur and up.

Have:
- ~54cm vintage Centurion project Cinelli frameset
- 9s Shimano 105 brifters + long cage RD
- 10s Sram Apex shifters + RD + Rival brakes + Sram 10 12?-28 cassette.
- 10s era Shimano R600 compact crankset. 172.5, 50/34. (eng and ita bb avail) + Ultegra braze-on FD (triple)
- 10s Campy Centaur compact crank. 172.5, 50/34. Silver alloy.
- 10s Campy Centaur braze-on FD, silver alloy.

Chicago Al 

[got it]

afilado

ISO...

Italian thread (36x24, 70x112-115mm) bottom bracket w/ JIS taper. DuraAce, Suntour Superbe, etc.

Have...

- Campy NR/SR BB (Italian or English or French)
- World Class Sealed BB w/titanium spindle (Italian)

J

The_Joe

Wife says her Nishiki Landau is too heavy. Looking for something in aluminum possibly. 49cm.
Would trade for the Landau or work something else out.
Thanks

southpawboston

PM incoming...

gregaz

ISO: Two ferrules for Dia-Compe brake levers to finish my Peugeot Mixte project.

7/8timing

ISO; Campy clincher or tubular wheelset with a freewheel.

Have; Major Taylor adjustable stem and other bits...

please PM

neo_pop_71

Hello-

I need to empty some hooks and these cosmetically challenged fine steel frames need to find new homes. I can send you detailed photos and complete descriptions, just send me a PM and I'll get back to you promptly.

(*** all measurements are center to center***)

1983 Univega Gran Turismo (frame, no fork)
seat tube 24.5" & top tube 22.5"
Japanese made lugged unknown tuning

1984 Trek 830 (frame, no fork)
seat tube 21.5" & top tube 22.5"
USA made lugged Reynolds 531 tubing

1988 Nishiki Ariel (frame and fork)
seat tube 17" & top tube 21"
Japanese made tig welded double butted 4130 frame and fork

1992 Trek 950 (frame and fork)
seat tube 19" & top tube 22.5"
USA made lugged double butted True Temper OX II frame with lugged Tange "Big Fork" triple butted CrMo



I have plenty of builds going at any given time, if you see a frame that you can use, send me a PM and let me know what you like to trade. The only thing I need is a modern steel frame 26" BMX style dirt jumper (for example Redline Monocog) for my nephew. He wants one and I want to help him out, obviously I'll have to add frames, parts, or cash to square the deal.

Thanks!

-D-

RubberLegs

These look like what you need? They fit Dia-Comp Road levers, I assume they are the same size, PM me an address and I'll shoot em to you....ON THEIR WAY.

jamesj

ISO:

Friend is looking for a hub set 126mm 36 hole in rear, 100mm 32 or 36 front.

shimano uniglide or hyperglide.
or even freewheel.

have: odds and ends.

crank_addict

Looking for a 52T chainring (1/8" x 1/2" chain p). Steel is just fine and BCD doesn't matter. Thanks

16Victor

I have a worn out Dura Ace EX 52T...interested? Spider is sold.

crank_addict

Thanks for the reply and neat to see DA EX pre 1980 stuff. Wish I could use it but I don't think any of the DA will work with the 1/8 x 1/2 chain pitch.

gaucho777 

Still ISO Mavic headset wrenches (#671/672):
https://velobase.com/ViewTool.aspx?ID...244&AbsPos=205

Have:
Lots of stuff (FWs, Shimano 600 bits, Modolo synterized brake pads (2 pairs, white), panniers, 36h Gnutti HF front hub, Shimano cartridge BB, Suntour shifters/FD/RD, bottle cages, among other things - just ask)

miamijim

I have another set identical to the set I sent your way a few weeks ago. Let me know...

ThermionicScott 

The chainring doesn't have to be 1/8" to work with a 1/8" chain.

realestvin7

Yes, it works. Finding Dura-Ace in 1/8" is just costly. Its mostly track specific. Most BMX and track chainrings are 1/8". The problem lies in the fact that track and early BMX stuff is getting harder to find. Especially pre NJS stuff (marked BIA). I can probably acquire one such chainring but it will likely be pretty costly.

crank_addict

Thanks for correcting me and realize they work but I'm after a thicker 1/8" stiff chainring, especially if aluminum. The ride its going on is very much vintage but lacking some higher speeds. It has a chunky 3 speed rear hub with a single steel 46T chainring cotter crank. The goal is adding a 52T and front derailleur.

Edit: Thanks all and found what I needed. As luck would have it, fresh listing of a vintage NOS ring on fleabay looks good.

jdefran

ISO:
Jockey wheels for Cyclone GT
Suntour cable stop (for bar end shifters)
Proofide
Brass bell
Handlebar bag

Have:
700x32 Bontrager Race Lite Hardcase
27" 'cross tires
Normandy competition HF hubs (currently laced to 27" Ambrosio hoops)
Dura ace DT shifters
Nitto stem (110/25.4)
Suntour AG derailleur set
Shimano light action long cage RD
Raleigh Panto'd parts (crank, FD, seat post, brakes)
Sakae BB (140mm spindle)
Shimano seat tube/down tube cable guide
Other miscellaneous stuff

Andiroo99

Hi

I recently purchased a used Cinelli 1A stem. 130mm. 26.0 clamp. It has minimal marring to quill.

It is not going to work for what I need as it is actually too long for me and also I would prefer a straight bar rather than the angled bar. I am not sure of the precise angle but it can be seen in the photos.



I would like to swap for a shorter 1A Cinelli stem with a 26.0 clamp and flat rather than angled. Ideally I am looking for a 100mm length and angle of -10 to 0 degrees so that stems ends up angled up past horizontal.

Happy to answer any questions.

Best

Andy

jeirvine 

jonwvara was looking for a rear AG

seely

Trade:

2 NEW Panaracer Pasela's, all black, 700x32 with the tags still attached. Just the basic model, nothing fancy, but new none the less.

7/8spd 105 front/rear derailleurs. Used, but very functional.

7/8spd 105/600 downtube shifters

7/8spd well used 105 crank, very functional w/ 52/42 Biopace rings. Lots of rub wear on the arms but would polish up fine. 172.5

Wanted:

Two decent tires of similar quality to the Pasela's, 700x25

130 BCD Sugino or SR ring, 46-48t

Suntour drivetrain bits

unworthy1

you won't find a Cinelli 1A stem with 0° or even -10° angle, all these, intended for road bike use, will have approx. -17° angle. If you expand your choice to any brand of 1" alloy quill stem with that angle, you'll have much better luck, but finding one with a 26.0 clamp diameter may be a real killer (you might find a Japanese stem such as a Nitto that spec'd 25.8)...if you can bear to use a different handle bar your % goes way up.

jonwvara 

Yes, still am.