Front derailleur adapter for smaller chainrings
#1
Pizzaiolo Americano
Thread Starter
Front derailleur adapter for smaller chainrings
I have a 2021 Trek Domane that I ride on gravel and road so I just got a new crankset with 46/36 chainrings. On this bike, I cannot get the Ultegra deraileur low enough to be in the 2-3mm range because the braze on slot doesn't go low enough. Does anyone make an adaptor to lower the front deraileur 5mm or so? It shifts and rides fine as is but I want to get it within spec...
#2
Senior Member
Join Date: Oct 2006
Location: Orange County, CA
Posts: 4,770
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 630 Post(s)
Likes: 0
Liked 369 Times
in
206 Posts
You can use a braze on adapter if you want to go 5mm:
https://www.amazon.com/SHIMANO-Dura-...2N499ZPSQKGJQS
But try setting it up slightly out of the 2-3mm spec. You might not even notice the difference.
https://www.amazon.com/SHIMANO-Dura-...2N499ZPSQKGJQS
But try setting it up slightly out of the 2-3mm spec. You might not even notice the difference.
#3
Pizzaiolo Americano
Thread Starter
You can use a braze on adapter if you want to go 5mm:
https://www.amazon.com/SHIMANO-Dura-...2N499ZPSQKGJQS
But try setting it up slightly out of the 2-3mm spec. You might not even notice the difference.
https://www.amazon.com/SHIMANO-Dura-...2N499ZPSQKGJQS
But try setting it up slightly out of the 2-3mm spec. You might not even notice the difference.
#5
Senior Member
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times
in
998 Posts
I have a 2021 Trek Domane that I ride on gravel and road so I just got a new crankset with 46/36 chainrings. On this bike, I cannot get the Ultegra deraileur low enough to be in the 2-3mm range because the braze on slot doesn't go low enough. Does anyone make an adaptor to lower the front deraileur 5mm or so? It shifts and rides fine as is but I want to get it within spec...
Likes For noodle soup:
Likes For fourfa:
#9
Pizzaiolo Americano
Thread Starter
I ordered the Fit-link and will see if I can get the adjustment right with it...Thanks all!
#11
Pizzaiolo Americano
Thread Starter
I got the Fit Link installed and it works perfectly. Thanks all!
Likes For Pizzaiolo Americano: