How to remove this cassette?
#1
Senior Member
Thread Starter
How to remove this cassette?
How do I remove this cassette? Do I need a special tool?
#2
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,395 Times
in
2,056 Posts
It's a freewheel not a cassette, and you need the correct tool to catch the splines around the axle
Likes For dedhed:
#4
Senior Member
Join Date: Sep 2013
Location: Massachusetts
Posts: 4,530
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 2112 Post(s)
Liked 663 Times
in
443 Posts
This Park Tool video gives you a good walkthru.
Pay particular attention to the tool selection.
Your pic isn’t clear enough to definitively answer which tool you need, it’s too hard to count the splines and while it looks like there is a brand, we can’t read it.
But you’ll be able to do it with your bare eyes. (A rag may help with the brand.)
If you are still unsure, bring the wheel to the local bike shop, they’ll help you purchase the right freewheel tool.
-mr. bill
Pay particular attention to the tool selection.
Your pic isn’t clear enough to definitively answer which tool you need, it’s too hard to count the splines and while it looks like there is a brand, we can’t read it.
But you’ll be able to do it with your bare eyes. (A rag may help with the brand.)
If you are still unsure, bring the wheel to the local bike shop, they’ll help you purchase the right freewheel tool.
-mr. bill
Likes For mr_bill:
#5
Really Old Senior Member
See the difference between the 2 here-
https://www.sheldonbrown.com/free-k7.html
https://www.sheldonbrown.com/free-k7.html
#6
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,395 Times
in
2,056 Posts
Likes For dedhed:
#7
Senior Member
Join Date: Sep 2004
Location: Chicago area
Posts: 2,551
Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
Liked 582 Times
in
399 Posts
It's been a while since I took off a freewheel... but you might have to remove the axle to get access to the splines for your (or the shop's) tool.
This would best be done by removing the locknut and cone from the non-drive side. Don't lose the bearings!
This would best be done by removing the locknut and cone from the non-drive side. Don't lose the bearings!
#8
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
No no no. It is not required to remove an axle to get a freewheel off.
#9
Senior Member
Join Date: Sep 2013
Location: Massachusetts
Posts: 4,530
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 2112 Post(s)
Liked 663 Times
in
443 Posts
The tool is, what, less than 10.00?
It’ll all but pay for itself the first time, and will be free the next time, assuming it isn’t lost in the meantime.
-mr. bill
#10
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,786
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times
in
1,934 Posts
Likes For JohnDThompson:
#11
Senior Member
Join Date: Sep 2004
Location: Chicago area
Posts: 2,551
Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
Liked 582 Times
in
399 Posts
No, that shouldn't be necessary. It looks to follow the Shimano UG pattern, which uses a thin-wall tool to fit between the axle locknut and the freewheel body (Park FR-1.3, for example). In the event that it doesn't fit, it's only necessary to remove the axle locknut to seat the tool. The axle itself can remain in place.
#12
Senior Member
Thread Starter
Thanks for the Park Tools video. After some cleaning, looks like it says “LX.” Just moved and think my nearest bike shop is 45 minutes away so want to fix this myself. Very tough to see even after cleaning (old eyes) but counted 12 splines so ordered the FR1.3 removal tool for $10.
Last edited by wolfpack95; 06-05-22 at 07:45 PM.
#13
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,389
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,971 Times
in
1,918 Posts
it looks like the common splined socket that I would receive in all the basic/standard edition tool assemblies. the one you ordered seems like the more expensive made version.
__________________
-Oh Hey!
-Oh Hey!