Touring on Bridgestone xo-1
#1
Newbie
Thread Starter
Join Date: Sep 2021
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Touring on Bridgestone xo-1
Hi, has anyone ever toured on a Bridgestone xo-1 ? Is it capable for touring? I'm fortunate that my dad will be gifting me his xo-1 and next year I'm planning on biking a small portion of adventure cycling's Atlantic coast tour (MA to Bar Harbor).
I'm just wondering if that bike will be ok or if I need to invest in a touring bike.
Thanks in advance for your help!
I'm just wondering if that bike will be ok or if I need to invest in a touring bike.
Thanks in advance for your help!
#2
Member
I don't see why you couldn't tour on it. It's essentially a hybrid with moustache handlebars. Be aware, however, that it only has a double crankset, so you won't have a super-low gear. I've never ridden one myself, though I have toured on a Bridgestone RB-T and an MB-2. Bridgestone made nice bikes.
Likes For axolotl:
#3
Senior Member
Was curious about the bike, looked it up and in the article it states this,
The ultimate "hybrid" (while conspicuously avoiding the term "hybrid"), the XO-1 had a road bike frame and geometry with 26" wheels, but slick road tires (mountain bike tires up to 1.6" would fit). It had a double chainring crank that was drilled for a third ring (110/74 bolt circle -- for a large selection of rings) should a rider decide to add one later. But the most prominent, and perhaps most controversial feature was the mustache handlebar -- designed by Grant Petersen, and produced by Nitto.
link to article
The Retrogrouch: Bridgestone XO-1: Cult of Personality
but ya, you'd probably be best to lower the gearing, if you can.
take a good side photo of the bike and put it up here.
The ultimate "hybrid" (while conspicuously avoiding the term "hybrid"), the XO-1 had a road bike frame and geometry with 26" wheels, but slick road tires (mountain bike tires up to 1.6" would fit). It had a double chainring crank that was drilled for a third ring (110/74 bolt circle -- for a large selection of rings) should a rider decide to add one later. But the most prominent, and perhaps most controversial feature was the mustache handlebar -- designed by Grant Petersen, and produced by Nitto.
link to article
The Retrogrouch: Bridgestone XO-1: Cult of Personality
but ya, you'd probably be best to lower the gearing, if you can.
take a good side photo of the bike and put it up here.
#4
Senior Member
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,851
Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 759 Post(s)
Likes: 0
Liked 810 Times
in
471 Posts
Probably worth a look:
Head tube angle sticks out and being fairly aggressive at 73 degrees. Wheel base (chain stay length) is on the shorter side for a touring bike..may or may not be an issue with heel strike on the rear panniers, if any. (scroll down on the linked page for a numbers comparison)
https://bikeinsights.com/compare?geo...253100168a60ed,
55cm XO-1 vs 54cm LHT, both 26"
It's said, "you can tour on anything". How comfortable you'll be is a different question. If you own the bike..set it up and try it for a short couple day tour..the only way to know for sure is how you feel at the end of the day, after day..
For myself..given the geometry, I'd use the XO for fast day rides and use something more comfortable for touring..but I'm an old(er) fart..so don't mind me.
Head tube angle sticks out and being fairly aggressive at 73 degrees. Wheel base (chain stay length) is on the shorter side for a touring bike..may or may not be an issue with heel strike on the rear panniers, if any. (scroll down on the linked page for a numbers comparison)
https://bikeinsights.com/compare?geo...253100168a60ed,
55cm XO-1 vs 54cm LHT, both 26"
It's said, "you can tour on anything". How comfortable you'll be is a different question. If you own the bike..set it up and try it for a short couple day tour..the only way to know for sure is how you feel at the end of the day, after day..
For myself..given the geometry, I'd use the XO for fast day rides and use something more comfortable for touring..but I'm an old(er) fart..so don't mind me.
#5
Senior Member
It'll be OK. But you might want to change the gearing.
#6
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
I have a '93 Bridgestone XO 2 which has the same geometry as the XO 1. It is essentially a road bike designed around 26 wheels and ample tire clearance. In the 90s if you wanted a fat tire, 26 inch wheels made a lot of sense. The bike is conceptually an early example of what today we would call a gravel bike.
Yes it's fine for touring if the gearing is set up right. Personally I'd lose the moustache bars and get drops. I dislike moustache bars.
The chain stays are likely not as long as you may find on a touring bike so you may have to take that into account when setting up the bike.
Also the XO 1 came in more than one flavor. The '92 had long reach sidepulls. That will limit the max tire size. The '93 had cantilevers and will take a fatter tire. My '93 XO 2 can comfortable take 26 x 1.75 tires and fenders and quite likely can take a larger volume tire. This is one of the best all around machines I have ever ridden.
Yes it's fine for touring if the gearing is set up right. Personally I'd lose the moustache bars and get drops. I dislike moustache bars.
The chain stays are likely not as long as you may find on a touring bike so you may have to take that into account when setting up the bike.
Also the XO 1 came in more than one flavor. The '92 had long reach sidepulls. That will limit the max tire size. The '93 had cantilevers and will take a fatter tire. My '93 XO 2 can comfortable take 26 x 1.75 tires and fenders and quite likely can take a larger volume tire. This is one of the best all around machines I have ever ridden.
Likes For bikemig:
#9
Newbie
Thread Starter
Join Date: Sep 2021
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks so much for the input. I didn't even think of the heel rub with the short chain stays. From the feedback I got here, seems like I'll just try out the ride for the next couple of months and I'll prob keep an eye out for a LHT on CL.
Super useful link btw, i just compared a bunch of bikes!
Super useful link btw, i just compared a bunch of bikes!
#10
Senior Member
Thanks so much for the input. I didn't even think of the heel rub with the short chain stays. From the feedback I got here, seems like I'll just try out the ride for the next couple of months and I'll prob keep an eye out for a LHT on CL.
Super useful link btw, i just compared a bunch of bikes!
Super useful link btw, i just compared a bunch of bikes!
Show a photo of your bike, and specifics of your gearing and shifters etc that will give more info of what can be changed potentially.
#11
Senior Member
Join Date: Oct 2017
Posts: 2,044
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 838 Post(s)
Liked 1,082 Times
in
522 Posts
People over in the classic and vintage section would probably love some photos. It’s now a rather rare bike, I believe only 2000 made, and was Grants last bike with Bridgestone before he left and created Rivendell, and the rest is history. It’s an early version of a style of bike that is now finally becoming immensely appreciated.
#12
Senior Member
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,851
Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 759 Post(s)
Likes: 0
Liked 810 Times
in
471 Posts
My touring bike is a drop bar conversion mountain bike. While some will wave hands about heel strike issues..I wear a size 12 shoe and use large panniers in the back and I still have pushing 2 inches of clearance between my shoes and the panniers.
Gearing is a big deal..or can be if it isn't reasonably close to what you'll need.