Worth fixing up an old bike when I already have a newish bike?
#1
Newbie
Thread Starter
Worth fixing up an old bike when I already have a newish bike?
Help me decide.
Bit of a back story, I used to bike all the time, even did some marathons. But that was all before 2000. In 2010 I bought a new mountain bike because I wanted to get back into biking, but it never happened. Earlier this year I moved to southern Maryland and of course I brought my bikes. Live in a nice small town half hour from Ocean City MD, half hour from Chincoteague VA, lot's of huge wildlife preserves within an hours drive, lots of trails. I'm actually motivated to get back into biking again.
Now, I could take the hardly used bike that I got in 2010, inflate the tires, grease it up, and it would be good to go. But I don't want to get rid of my old mountain bike, a Schwinn Mesa that I bought when I was 12 years old in 1993 after saving up my allowance etc for probably a year. It's silly but it actually has sentimental value. It was the only bike I used until I stopped biking around 2002, trails, a few marathons, road riding. Broke and replaced nearly everything on it except the frame itself. It needs work though, pedals + sprocket, chain, derailleur, tires are dry rotted. The one nice thing about it is that it has solid rubber inner tubes so no flat tires ever, ignoring the dry rotted tires that could fall apart anyway.
What would all of you guys/girls do? Fix it up or just say screw it and trash it?
Bit of a back story, I used to bike all the time, even did some marathons. But that was all before 2000. In 2010 I bought a new mountain bike because I wanted to get back into biking, but it never happened. Earlier this year I moved to southern Maryland and of course I brought my bikes. Live in a nice small town half hour from Ocean City MD, half hour from Chincoteague VA, lot's of huge wildlife preserves within an hours drive, lots of trails. I'm actually motivated to get back into biking again.
Now, I could take the hardly used bike that I got in 2010, inflate the tires, grease it up, and it would be good to go. But I don't want to get rid of my old mountain bike, a Schwinn Mesa that I bought when I was 12 years old in 1993 after saving up my allowance etc for probably a year. It's silly but it actually has sentimental value. It was the only bike I used until I stopped biking around 2002, trails, a few marathons, road riding. Broke and replaced nearly everything on it except the frame itself. It needs work though, pedals + sprocket, chain, derailleur, tires are dry rotted. The one nice thing about it is that it has solid rubber inner tubes so no flat tires ever, ignoring the dry rotted tires that could fall apart anyway.
What would all of you guys/girls do? Fix it up or just say screw it and trash it?
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,992
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6196 Post(s)
Liked 4,810 Times
in
3,318 Posts
I upgraded an old '91 Paramount frame once back in 2017 and put 11 speed Shimano 105 on it. It was a great experience to bring me up to date on my DIY skills since I was previously delusional with the idea that friction shifters on the downtube were all anyone really needed. Boy did I find out how wrong I'd been for too many years.
That said, in 2020, I was about to upgrade my '78 Raleigh Competition GS to 11 speed 105. Bought most all the groupset. Was about to get started on the upgrade and then realized that it'd still not be as light as what a new road bike would be. So I went out and bought a new road bike and never looked back. The new bike is just too much more fun than anything else I've ever ridden. Don't get me wrong, my previous bikes were great comfortable rides. But fun is fun.
That said, in 2020, I was about to upgrade my '78 Raleigh Competition GS to 11 speed 105. Bought most all the groupset. Was about to get started on the upgrade and then realized that it'd still not be as light as what a new road bike would be. So I went out and bought a new road bike and never looked back. The new bike is just too much more fun than anything else I've ever ridden. Don't get me wrong, my previous bikes were great comfortable rides. But fun is fun.
Likes For Iride01:
#3
OM boy
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,369
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 517 Post(s)
Liked 645 Times
in
438 Posts
If you're in a mood to 'fix', have the knowhow or willing to do the investigative work to learn, have the tools, time and money to buy the needed parts - WHy Not?
Always nice to have a backup bike, which happens when they're both rideable...
but if there's a choice between 'fixing' and 'riding', time-wise - then NO, always better to ride... OK to sub repair time for TV/couch time...
Always nice to have a backup bike, which happens when they're both rideable...
but if there's a choice between 'fixing' and 'riding', time-wise - then NO, always better to ride... OK to sub repair time for TV/couch time...
Likes For cyclezen:
#4
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,834
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 1,064 Times
in
535 Posts
If it has sentimental value, then fix up the old bike so you have 2 rideable bikes. I did that with an old Schwinn Sports Tourer, that I wish I had never sold, and now ride it quite a bit. No one on this site is going to think having 2 bikes to ride is a bad idea, a lot of us have more.
Tim
Tim
Last edited by tkamd73; 07-19-22 at 08:31 PM.
Likes For tkamd73:
#5
Dirty Heathen
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,182
Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 889 Post(s)
Liked 906 Times
in
534 Posts
I’d say fix it up. It’s always nice to have a spare bike; and if you do a lot of different kinds of riding, you can fit the bikes out to be better for certain kinds of rides.
Here’s a few of mine; 1997 SoftRide for “sporty” road rides; the black ‘96 Cannondale is my dedicated trail MTB, and I just picked up that red-orange ‘88 Klein to build a “knock-around” city bike
One benefit to using “nice” older bikes is that you can build a stable of different bikes for about the cost of a single new bike.
Here’s a few of mine; 1997 SoftRide for “sporty” road rides; the black ‘96 Cannondale is my dedicated trail MTB, and I just picked up that red-orange ‘88 Klein to build a “knock-around” city bike
One benefit to using “nice” older bikes is that you can build a stable of different bikes for about the cost of a single new bike.
Last edited by Ironfish653; 07-18-22 at 10:26 PM.
#6
Senior Member
Join Date: Jun 2019
Posts: 939
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 466 Times
in
259 Posts
I have 5 bikes in various states of repair on my front porch, 4 good bikes on my enclosed back porch, and 2 great bikes in my bedroom. What do you think my advice would be?
#7
Newbie
Thread Starter
Glad to hear it's not silly to consider fixing up the old bike and keeping it
Thanks everybody
Thanks everybody
#8
Newbie
Thread Starter
yay, that was my 10th post. can actually post a picture of it now.
Did take it for a little ride yesterday for the sake of it (just around the block, really tired my knees after not riding for +10 years), it rode ok despite it's condition after oiling the chain and gears.
Still needs the work done though, teeth on the derailleur gears are half the size they should be due to wear so the chain doesn't ride correctly on the lower gear, teeth on the pedal sprocket are similar, and nearly knife sharp from wear.
Derailleur and chain are easy, it'll just be a matter of measuring to find a properly fitting pedal assembly. Maybe a new fork too, don't remember why I needed those zipties around it, think the bolts holding the shocks together broke.
Did take it for a little ride yesterday for the sake of it (just around the block, really tired my knees after not riding for +10 years), it rode ok despite it's condition after oiling the chain and gears.
Still needs the work done though, teeth on the derailleur gears are half the size they should be due to wear so the chain doesn't ride correctly on the lower gear, teeth on the pedal sprocket are similar, and nearly knife sharp from wear.
Derailleur and chain are easy, it'll just be a matter of measuring to find a properly fitting pedal assembly. Maybe a new fork too, don't remember why I needed those zipties around it, think the bolts holding the shocks together broke.
Last edited by zaroba; 07-19-22 at 03:35 PM.
Likes For zaroba:
#9
Junior Member
yay, that was my 10th post. can actually post a picture of it now.
Did take it for a little ride yesterday for the sake of it (just around the block, really tired my knees after not riding for +10 years), it rode ok despite it's condition after oiling the chain and gears.
Still needs the work done though, teeth on the derailleur gears are half the size they should be due to wear so the chain doesn't ride correctly on the lower gear, teeth on the pedal sprocket are similar, and nearly knife sharp from wear.
Derailleur and chain are easy, it'll just be a matter of measuring to find a properly fitting pedal assembly. Maybe a new fork too, don't remember why I needed those zipties around it, think the bolts holding the shocks together broke.
Did take it for a little ride yesterday for the sake of it (just around the block, really tired my knees after not riding for +10 years), it rode ok despite it's condition after oiling the chain and gears.
Still needs the work done though, teeth on the derailleur gears are half the size they should be due to wear so the chain doesn't ride correctly on the lower gear, teeth on the pedal sprocket are similar, and nearly knife sharp from wear.
Derailleur and chain are easy, it'll just be a matter of measuring to find a properly fitting pedal assembly. Maybe a new fork too, don't remember why I needed those zipties around it, think the bolts holding the shocks together broke.
#10
Senior Member
Join Date: Sep 2015
Location: /dev/null
Posts: 675
Bikes: Soma Double Cross Disc (2017), red Hardrock FS (circa 1996)
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 217 Post(s)
Liked 155 Times
in
102 Posts
Is the headset 1 1/8"? Something like rigid Surly Troll fork and convert it to threadless. Drop bars a possibility as well.
#11
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
#12
Senior Member
Join Date: Mar 2019
Posts: 1,606
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 581 Post(s)
Liked 921 Times
in
518 Posts
I would get the old bike into ridable condition and do a few rides on it and the newer bike back-to-back, then decide which one you like more. You should keep them both, though - either the less-preferred one as a loaner for guests or friends, or put fenders on it and make it a rain/bad weather bike. Or put road tires on one and nice aggressive MTB tires on the other (putting the tires you are likely to use the most on the bike you want to ride the most).
I promise the day will never come that you say 'I wish I didn't have two bikes'.
As the BF wisdom goes: If n is the number of bikes you currently own, then the correct number of bikes to own is n+1
I promise the day will never come that you say 'I wish I didn't have two bikes'.
As the BF wisdom goes: If n is the number of bikes you currently own, then the correct number of bikes to own is n+1
#13
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
I've owned a lot of bikes, but sometimes I wish I still had my old Schwinn World Sport that my parents gave me as a HS graduation present. I rode it all through college and law school, did a few triathlons, and commuted to my first job. I'd fix it up as a single speed city bike. Miss that old steel.
#14
Full Member
Join Date: Jan 2015
Location: Grass Valley, Ca
Posts: 387
Bikes: Surly Cross Check, Specialized Enduro Pro, Lemond Tourmalet
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 105 Post(s)
Liked 192 Times
in
94 Posts
Was faced with that recently. I'm on a Surly Crosscheck pretty well set up to my liking. Was in a local thrift shop and came across a very nice vintage Specialized Expedition in my size. Bought it. Very highly thought of bike. Great frame, well outfitted. Cleaned it up, started making plans for where it was going. Started a few things and rode it. Realized my CC is just as good, and already set up for me. Why do a lot of work to end up with what I'm at already? Sold it to an Eroica person.
Likes For gorillimo:
#15
Newbie
Fix them up if you like the bike! My wife and I each have nice road bikes and I have a decent mountain bike. But I still went out and found a Trek 7500 from 1999 to fix up and ride haha!
Likes For james89:
#16
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,996
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4954 Post(s)
Liked 8,095 Times
in
3,831 Posts
My stable of bikes includes machines from 1977 to 2019. Some get ridden a lot. Some not very much. All of them are in good condition and rideable right now. For me, the building/restoring is an enjoyable part of the cycling hobby. If you have the space, keep all the bikes you can. After all, N+1.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Last edited by Eric F; 08-04-22 at 04:31 PM.