Recommends on a "backwards" vintage build.
#1
Senior Member
Thread Starter
Recommends on a "backwards" vintage build.
Most bikes I've seen built start with a frame, and the builder hunts for parts that match the vintage of the frame.
Well, I'm doing things a little different (perhaps backwards!): I'm starting with the freewheel!
I found this old Atom 5-speed straightblock (14-15-16-18-20) and rebuilt it. It is such an unusual, cute little thing I thought maybe I could build a vintage ride around it. Hunt for some Huret or Campy components, maybe some Weinmann/Normandy wheels. Only then will I look for a frame that complements them - probably a 120mm rear spacing.
What do you classic/vintage gurus think? What problems might I run into?
Well, I'm doing things a little different (perhaps backwards!): I'm starting with the freewheel!
I found this old Atom 5-speed straightblock (14-15-16-18-20) and rebuilt it. It is such an unusual, cute little thing I thought maybe I could build a vintage ride around it. Hunt for some Huret or Campy components, maybe some Weinmann/Normandy wheels. Only then will I look for a frame that complements them - probably a 120mm rear spacing.
What do you classic/vintage gurus think? What problems might I run into?
#2
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7349 Post(s)
Liked 2,474 Times
in
1,437 Posts
Reminds me of the Woody Allen movie "Sleeper" where he was charged with creating a human being from a salvaged nose.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#3
Senior Member
Join Date: Dec 2005
Location: Sunny Tampa, Florida
Posts: 1,542
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 49 Times
in
41 Posts
I'm no guru, but I play one on the internets. But not a bike guru. So what.
I think that's an excellent plan. The thing I wouldn't do is buy any frame specific components until you know what you're going to be bolting it all onto. Things like wheelgoods, and cranks are all pretty well interchangeable. But you don't know what bottom bracket you'll need yet.
I think that's an excellent plan. The thing I wouldn't do is buy any frame specific components until you know what you're going to be bolting it all onto. Things like wheelgoods, and cranks are all pretty well interchangeable. But you don't know what bottom bracket you'll need yet.
__________________
Still stupid and seriously neglected..
Still stupid and seriously neglected..
#6
Senior Member
Join Date: Apr 2008
Location: Maidstone, Kent, England
Posts: 2,637
Bikes: 1970 Holdsworth Mistral, Vitus 979, Colnago Primavera, Corratec Hydracarbon, Massi MegaTeam, 1935 Claud Butler Super Velo, Carrera Virtuoso, Viner, 1953 Claud Butler Silver Jubilee, 1954 Holdsworth Typhoon, 1966 Claud Butler Olympic Road, 1982 Claud
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 11 Times
in
10 Posts
An unusual plan, but why not? The difficulty might be knowing which parts to buy and which to pass over, until you've got a good picture in your mind of what you want to end up with and making sure they will fit the frame you finally choose. However, when I've upgraded a few bikes in my collection I often find I have a pile of perfectly good displaced parts, say a pair of wheels, a chainset, brakes, gears and saddle and then start looking for a frame in my size to hang them on. It rarely works out that neatly and I usually finish by replacing some of the "original" collection of parts to match the "new" frame - then start again with a new collection of parts looking for another frame!
Last edited by Oldpeddaller; 07-07-09 at 05:39 PM. Reason: repetitions corrected
#7
Vintage French Bike Fan
Join Date: Jun 2007
Location: Portland, OR
Posts: 628
Bikes: Peugeot UO-8, Peugeot 80's 12 spd
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hmmm, starting with a freewheel. I don't know about the logic of that, but hey, go for it! I'd recommend a nice French frame to go with it.
Karl
Karl
#8
afraid of whales
Join Date: Apr 2009
Location: Front Range, CO
Posts: 4,306
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 347 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Kinda like making a marriage out of a used condom you found on the bike path. If it was Regina Oro, maybe, but a sacked out Atom? I still have my Phil Wood remover for that sucker!
#9
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7349 Post(s)
Liked 2,474 Times
in
1,437 Posts
I have mine, and I used it last week!
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#10
Bottecchia fan
Join Date: Aug 2003
Location: Colorado Springs, CO
Posts: 3,520
Bikes: 1959 Bottecchia Milano-Sanremo (frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame), 1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame), 1974 Peugeot UO-8
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 12 Times
in
9 Posts
I don't know, I started one of my builds with a pair of Fiamme yellow label clincher rims and a set of high-flange Nuovo Tipo hubs. Then again, I knew what kind of frame they would be going on one day when I finally found it.
__________________
1959 Bottecchia Milano-Sanremo(frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame),
1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame),
1974 Peugeot UO-8, 1988 Panasonic PT-3500, 2002 Bianchi Veloce, 2004 Bianchi Pista
1959 Bottecchia Milano-Sanremo(frame), 1966 Bottecchia Professional (frame), 1971 Bottecchia Professional (frame),
1973 Bottecchia Gran Turismo, 1974 Bottecchia Special, 1977 Bottecchia Special (frame),
1974 Peugeot UO-8, 1988 Panasonic PT-3500, 2002 Bianchi Veloce, 2004 Bianchi Pista
#11
Velocommuter Commando
#12
Senior Member
Thread Starter
Well, I have a pair of Huret deraillers already. Would really like to snag a Sedis chain and Stronglight crank (although a quality Nervar would do). And it wouldn't be just right without a set of MAFAC Racer centerpulls - but I'm trying not to be TOOOO picky!
Say, if anyone has an old Atom remover tool they like to part with, I'd be willing to bargain???
Say, if anyone has an old Atom remover tool they like to part with, I'd be willing to bargain???
#13
Senior Member
Thread Starter
#14
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7349 Post(s)
Liked 2,474 Times
in
1,437 Posts
English, by far. You really don't want to build up a French-spec bike these days. You can do it, but I don't think it's worth it, and I love French bikes.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#15
Senior Member
Join Date: Feb 2008
Location: Milwaukee WI
Posts: 252
Bikes: Schwinn Traveler, Chimo Concourse, Next mountain bike, all crap!
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I can relate. I have a cool set of drilled chainrings and crankset that I'm planning a build around.