Niterider Mako 250 Light Repair Suggestions
#1
Senior Member
Thread Starter
Join Date: Dec 2007
Location: Western Ma.
Posts: 965
Bikes: Diamondback "parkway" Spec. "expedition
Likes: 0
Liked 43 Times
in
34 Posts
Niterider Mako 250 Light Repair Suggestions
The small tabs on my Niterider Mako 250 are worn to the point where the head the light won't attach to the body.
Awaiting on call back from Niterider but, any suggestions on how to lock the 2 pieces together till then?
Awaiting on call back from Niterider but, any suggestions on how to lock the 2 pieces together till then?
#2
hoppipola
I think some pictures would help others to understand your problem and maybe give some advice !
Likes For holytrousers:
#3
Senior Member
Thread Starter
Join Date: Dec 2007
Location: Western Ma.
Posts: 965
Bikes: Diamondback "parkway" Spec. "expedition
Likes: 0
Liked 43 Times
in
34 Posts
There are 3 tabs that lock the light head to the body. I is so worn it won't lock.
Using a hose clamp to keep the parts together,
Gorilla tape is not holding as the spring battery connectors are too strong.
Using a hose clamp to keep the parts together,
Gorilla tape is not holding as the spring battery connectors are too strong.