Build your own hybrid
#1
Senior Member
Thread Starter
Build your own hybrid
Has anyone built their own hybrid? They are basically light duty MTBs or fat bar road bikes.
Likes For cs1:
#2
Senior Member
Join Date: Jan 2016
Location: Alabama
Posts: 519
Bikes: Konas: Jake the Snake-Fire Mountain-Zing Supreme, Dew Deluxe,Zone Ltd. (frame, needs parts), Surly Long Haul Trucker, Santana Arriva tandem, Montagues: Paratrooper-Fit, Trek 1200, Bianchi Ocelot, Fantom Cross Uno, Bridgestone 200
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Liked 227 Times
in
122 Posts
Old Cannondale M500 frame I got from the local co-op. I built it up from parts I had laying around, and just put together the cockpit with parts I got for my birthday from my wife and daughter.
...the wheels cost a bit, though. I got 'em from Velocity when I weighed about 370.
...the wheels cost a bit, though. I got 'em from Velocity when I weighed about 370.
#3
Senior Member
Join Date: May 2013
Location: Kips Bay, NY
Posts: 2,212
Bikes: Ritchey Swiss Cross | Teesdale Kona Hot | Haro Extreme | Specialized Stumpjumper Comp | Cannondale F1000 | Shogun 1000 | Cannondale M500 | Norco Charger | Marin Muirwoods 29er | Shogun Kaze | Breezer Lightning
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 576 Post(s)
Liked 1,002 Times
in
488 Posts
Braze/weld a frame and fork and build up a new bike? No
Start with bare frame, build with new/NOS parts? Yes
Tear down existing bike down to individual bolts, clean, rebuild with new/NOS parts as needed? Yes
#4
Senior Member
Thread Starter
@DorkDisk not literally brazing a frame. I meant using an existing frame and equipping it the way you want to. I’m a big vintage MTB guy. I really love to repurpose older bikes. Just wondering if anyone had done something similar. After I posted I realized that most hybrid riders are newer to the sport and don’t do a ton of wrenching experience. But I posted it so let’s see what happens.
#5
Not racing.
I'm also a fan of repurposing old rigid mountain bikes, and I've done several. I suppose if you take a mtb and make it more street/road friendly, that's a hybrid, right? Anyway here's my Univega Range Rover.
Likes For stanman13:
#6
Senior Member
Join Date: Jan 2016
Location: Alabama
Posts: 519
Bikes: Konas: Jake the Snake-Fire Mountain-Zing Supreme, Dew Deluxe,Zone Ltd. (frame, needs parts), Surly Long Haul Trucker, Santana Arriva tandem, Montagues: Paratrooper-Fit, Trek 1200, Bianchi Ocelot, Fantom Cross Uno, Bridgestone 200
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Liked 227 Times
in
122 Posts
My Cannondale makes a great hybrid, though I'll reserve a set of knobbies to to try it out on a trail sometime. I took it to a nearby cutoff where I've been doing laps to build base miles, and it worked great, got a lot of PRs on Strava for those segments (which I blew away again the next day, after I got my Kona CX bike back together)
The wide bar got swapped over to my Paratrooper, and that bike's narrower bar is now on the Dale, as I plan on mostly using it for city/group rides, and don't need that much leverage.
The wide bar got swapped over to my Paratrooper, and that bike's narrower bar is now on the Dale, as I plan on mostly using it for city/group rides, and don't need that much leverage.
#7
Senior Member
Join Date: Apr 2007
Location: Munising, Michigan, USA
Posts: 4,131
Bikes: Priority 600, Priority Continuum, Devinci Dexter
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 685 Post(s)
Likes: 0
Liked 55 Times
in
37 Posts
@DorkDisk not literally brazing a frame. I meant using an existing frame and equipping it the way you want to. I’m a big vintage MTB guy. I really love to repurpose older bikes. Just wondering if anyone had done something similar.
I love the simplicity of the bike, and it's my grab-and-go bike for fitness rides around town.
#8
Senior Member
Join Date: Aug 2012
Location: Los Alamitos, Calif.
Posts: 2,475
Bikes: Canyon Endurace
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1041 Post(s)
Liked 923 Times
in
540 Posts
I've had a 2001 Trek 7700 sitting in the garage for a little over a year. Right now it is only used to get to the gym and back. I guess you could sort of call it my beater bike. As far as reliability goes, it would appear to have a lot more miles left in it.
https://www.bicyclebluebook.com/Sear...50&model=65341
Here is another thread with a picture of it in it's current condition...
https://www.bikeforums.net/hybrid-bi...ved-trash.html
Back in the day it was advertised as Treks top of the line hybrid. But I'd like to re-purpose it to be a little more off-road / abuse capable. The thing that is holding me back is that I don't have a lot of spares sitting around and this thing is going to take a little cash in order to get it how I'd like it. The Rolf wheels were spec'd for 38mm tires. These are very thin wheels and my 32's seem to bulge on them. Besides, I don't think the spoke pattern is conducive to hitting fire roads etc. A new stem, bars, seatpost and shifters are not going to be a problem. What does suck is the Shimano Nexave drivetrain. Without going into detail, this has to go. The RockShox Metro SL shock is in good shape but low-end. I'm going to try and do a disassemble, clean and rebuild so we'll have to see how that goes. I have a set of 9speed brake/shift levers and I'd like to turn this into a capable triple front.
I'm just worried about this thing nickle and diming me to death. So right now I'm on a mission scouring C/L and obsolete part sales at online vendors to see what I can do.
https://www.bicyclebluebook.com/Sear...50&model=65341
Here is another thread with a picture of it in it's current condition...
https://www.bikeforums.net/hybrid-bi...ved-trash.html
Back in the day it was advertised as Treks top of the line hybrid. But I'd like to re-purpose it to be a little more off-road / abuse capable. The thing that is holding me back is that I don't have a lot of spares sitting around and this thing is going to take a little cash in order to get it how I'd like it. The Rolf wheels were spec'd for 38mm tires. These are very thin wheels and my 32's seem to bulge on them. Besides, I don't think the spoke pattern is conducive to hitting fire roads etc. A new stem, bars, seatpost and shifters are not going to be a problem. What does suck is the Shimano Nexave drivetrain. Without going into detail, this has to go. The RockShox Metro SL shock is in good shape but low-end. I'm going to try and do a disassemble, clean and rebuild so we'll have to see how that goes. I have a set of 9speed brake/shift levers and I'd like to turn this into a capable triple front.
I'm just worried about this thing nickle and diming me to death. So right now I'm on a mission scouring C/L and obsolete part sales at online vendors to see what I can do.
#9
Senior Member
Join Date: Apr 2007
Location: Munising, Michigan, USA
Posts: 4,131
Bikes: Priority 600, Priority Continuum, Devinci Dexter
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 685 Post(s)
Likes: 0
Liked 55 Times
in
37 Posts
Here is another thread with a picture of it in it's current condition...
https://www.bikeforums.net/hybrid-bi...ved-trash.html
https://www.bikeforums.net/hybrid-bi...ved-trash.html
#10
we be rollin'
I built a flat-bar road bike with a Marin Lucas Valley Alp frame (Random Bike Parts) and Kinesis Crosslight 3 forks (Chainreactioncycles). It also has wheels with Tiagra hubs (Rosesbikes).
Other parts:
Shimano Sora crankset (Chainreactioncycles)
XLC pedals (xxcycle)
Shimano R440 shifters (eBay)
Shimano BL-R550 brake levers (Bike24)
Shimano Sora mini-V brakes (Bike24)
Shimano R443 front derailleur (Saint John Cycles)
Shimano Deore LX rear derailleur (eBay)
Anyway, the Evo bell I got from Niagaracycle as well as the Sunlite bottle cage. The Ritchey Comp Trail grips came from Bike24 and WTB Rocket 130mm saddle from Chainreactioncycles. The greeen XLC seatpost clamp came from xxcycle.
Pretty sweet bike overall partly because I like alu frame & fork + V-brakes & square taper bottom bracket (Shimano BB-UN55). By the way, that rear rack is a Sunlite Goldtech Tourer from Niagaracycle. It's pretty sweet as well. The Bush & Muller
rear red reflector that I installed on it came from Rosebikes. Also the silver SKS fenders came from Chainreactioncycles. The Dimension stem came from Niagaracycle.
Other parts:
Shimano Sora crankset (Chainreactioncycles)
XLC pedals (xxcycle)
Shimano R440 shifters (eBay)
Shimano BL-R550 brake levers (Bike24)
Shimano Sora mini-V brakes (Bike24)
Shimano R443 front derailleur (Saint John Cycles)
Shimano Deore LX rear derailleur (eBay)
Anyway, the Evo bell I got from Niagaracycle as well as the Sunlite bottle cage. The Ritchey Comp Trail grips came from Bike24 and WTB Rocket 130mm saddle from Chainreactioncycles. The greeen XLC seatpost clamp came from xxcycle.
Pretty sweet bike overall partly because I like alu frame & fork + V-brakes & square taper bottom bracket (Shimano BB-UN55). By the way, that rear rack is a Sunlite Goldtech Tourer from Niagaracycle. It's pretty sweet as well. The Bush & Muller
rear red reflector that I installed on it came from Rosebikes. Also the silver SKS fenders came from Chainreactioncycles. The Dimension stem came from Niagaracycle.
Likes For hybridbkrdr:
#11
Full Member
Join Date: Apr 2015
Location: Ann Arbor, MI
Posts: 282
Bikes: '97 Bianchi CDI, '97 Specialized RockHopper, '13 Specialized Sirrus Pro, '13 Trek 8.5 DS, '13 BH EasyMotion NeoXtrem, '14 Trek Domane, '86 Schwinn AirDyne ;)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 39 Post(s)
Liked 23 Times
in
21 Posts
I have several decades of experience riding and maintaining, but none building as such, and my oldest bike is a youngin '97. I do like your question, and have two related responses -FWIW: one build experience and one hybrid-build idea-only. First, I have a full-suspension MTB custom build, because I couldn't find a ready-built/retail carbon 26" MTB bike in 2013 and 14, and I wanted full Fox suspension, AND the Grip-Shifting that is on my '97 RockHopper, and which Sram had bought up in the interim, among other nice things. So, I do now have a rare-if-not-unique 25-lb build consisting of a 2013 carbon BMC frame with the nice parts I wanted attached. I think the only thing I was not able to get was a remote lockout on the fork I liked.
The idea may be even stranger. My Trek Domane is the best-FITTING and riding bike I have, and have ever had. Alas, it is not as flexible as my other bikes. I have thought of either getting a Domane frame somewhere and having a hybrid built, OR taking my Domane, and among other things, changing over to flat bars, fitting bigger tires, replacing my Speedplays, etc,, etc.
So, there you are, and I'll enjoy reading your thread.
The idea may be even stranger. My Trek Domane is the best-FITTING and riding bike I have, and have ever had. Alas, it is not as flexible as my other bikes. I have thought of either getting a Domane frame somewhere and having a hybrid built, OR taking my Domane, and among other things, changing over to flat bars, fitting bigger tires, replacing my Speedplays, etc,, etc.
So, there you are, and I'll enjoy reading your thread.
#12
Member
I finished my first build this weekend using a 1994 Cannondale H400 frame which belonged to my father in law. I stayed true to the original style of the bike, however I installed new components throughout. The one change I made was from cantilever to v-brakes. Great experience, I learned a lot, and I am now hunting around for the next frame to do this again. Unfortunately, I am new and haven't made enough posts to to upload a picture just yet.
Likes For RefRick:
#13
Senior Member
Thread Starter
I finished my first build this weekend using a 1994 Cannondale H400 frame which belonged to my father in law. I stayed true to the original style of the bike, however I installed new components throughout. The one change I made was from cantilever to v-brakes. Great experience, I learned a lot, and I am now hunting around for the next frame to do this again. Unfortunately, I am new and haven't made enough posts to to upload a picture just yet.
#14
Happy banana slug
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,696
Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1533 Post(s)
Liked 1,529 Times
in
917 Posts
It's still a work in progress (I've been saying this for months & it's getting frustrating), but Pretty Purple Princess Penelope used to be a mountain bike, and now she's a seriously comfortable, capable road bike and my commuter. I think it's the big cushy tires and 26" wheels that makes it so stable and nimble.
Still need to strip it down, clean the frame, treat some rust, shorten those cables, and change out that 175 mm crankset for a 152.
Still need to strip it down, clean the frame, treat some rust, shorten those cables, and change out that 175 mm crankset for a 152.
#15
Senior Member
Join Date: Jan 2016
Location: Alabama
Posts: 519
Bikes: Konas: Jake the Snake-Fire Mountain-Zing Supreme, Dew Deluxe,Zone Ltd. (frame, needs parts), Surly Long Haul Trucker, Santana Arriva tandem, Montagues: Paratrooper-Fit, Trek 1200, Bianchi Ocelot, Fantom Cross Uno, Bridgestone 200
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Liked 227 Times
in
122 Posts
Previously posted bike, but with trekking bars installed.
#16
Senior Member
I'm so tempted to build my own bike but I'm just afraid it's going to disintegrate into dust as soon as I hit 20 mph
Last edited by Meech33; 09-30-19 at 10:31 PM.
#17
Member
I had the exact same fear. I have made myself a regular at my local bike shop over the last few weeks and asked plenty of questions. I didn’t buy everything there, I was working on a fairly tight budget, but I did by some parts there. Final stage, I had them give it the once over final inspection to make sure everything was up to snuff. They also helped me fine tune the derailleurs. I dropped the mechanic who helped me regularly a gift card to our local beer garden as a thank you.
#18
Senior Member
Thanks!
Unfortunately, the guys at the LBS in my area aren't the friendliest guys in the world. They genuinely seem annoyed when anyone asks them a question.
I'll stick to this forum and YouTube videos until I'm comfortable enough to give it a shot.
Glad things worked out for you...enjoy your ride.
Unfortunately, the guys at the LBS in my area aren't the friendliest guys in the world. They genuinely seem annoyed when anyone asks them a question.
I'll stick to this forum and YouTube videos until I'm comfortable enough to give it a shot.
Glad things worked out for you...enjoy your ride.
Last edited by Meech33; 09-30-19 at 10:30 PM.
#19
Full Member
I built my wife a step through hybrid for her bad hip. She couldn’t swing a leg over her standard hybrid anymore, so it was canabalized and parts were added to a Random Bike Parts Marin frame I scored for $90. Turned out great and it’s much nicer than any mass produced step through bike.
Likes For csrpenfab: