Rebuilding a Vintage Bike
#1
Member
Thread Starter
Join Date: May 2020
Location: Royal Palm Beach, Florida
Posts: 31
Bikes: 1986 Peugeot Triathlon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
Rebuilding a Vintage Bike
How difficult is it to rebuild a vintage bike from the frame up.
#2
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
Understated answer for an understated question. It depends on the bike, your skill level, your access to parts, and your interest.
Likes For Wileyone:
#4
Senior Member
I would add including all that, it depends on the condition of the bike and its completeness. If it needs alot of parts and you are keeping it original , finding replacement parts can be difficult especially if you are trying to keep it correct down to date code on the components that can be tough.
__________________
#5
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,006
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,601 Times
in
1,764 Posts
Not difficult, but a certain level of determination is required to get the desired result.
#6
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,118
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 853 Post(s)
Liked 1,437 Times
in
819 Posts
Too broad of a question. If you want to go period correct, model original correct, the hardest 3 steps, IMO, are: finding the components/parts that are needed, paying for the items plus shipping, and the patience to get through the first two. If you do not have mechanic skills/knowledge, or the proper tools, it is going to be very challenging. If you already have those things, you probably would not have posted the question to begin with.
I rebuilt a late 80's Ochsner road bike in spring of 2019. I have owned the bike since buying it brand new in 1992. I had never done this before and did not have tools or the skills at the start. I purchased a basic tool kit that covered a lot of the maintenance/fixes for bikes, and added to them as the need came up. Videos on Youtube and Park Tools web sites are a huge help. Generous, helpful members of BikeForums were also a huge help, sometimes just with suggestions or words of encouragement, finding or identifying a tool or part that was needed, and the how-to info on the working of repair and replacement.
I was not looking to restore the bike to original, or to be period correct. Ergo, I have a bike that is a combination of original, used that I had on hand, and purchased new/used stuff. I was doing the rebuild to mostly to challenge myself/ I spent more money than I intended to, including powder coating, but I really like the way the bike came out. It is again one of my faves to ride. I had a good amount of frustration, some "AHA" moments, and a lot of self satisfaction. I have learned a lot and have now rebuilt a few bikes. I now do all the work on my bikes.
I say go for it.
I rebuilt a late 80's Ochsner road bike in spring of 2019. I have owned the bike since buying it brand new in 1992. I had never done this before and did not have tools or the skills at the start. I purchased a basic tool kit that covered a lot of the maintenance/fixes for bikes, and added to them as the need came up. Videos on Youtube and Park Tools web sites are a huge help. Generous, helpful members of BikeForums were also a huge help, sometimes just with suggestions or words of encouragement, finding or identifying a tool or part that was needed, and the how-to info on the working of repair and replacement.
I was not looking to restore the bike to original, or to be period correct. Ergo, I have a bike that is a combination of original, used that I had on hand, and purchased new/used stuff. I was doing the rebuild to mostly to challenge myself/ I spent more money than I intended to, including powder coating, but I really like the way the bike came out. It is again one of my faves to ride. I had a good amount of frustration, some "AHA" moments, and a lot of self satisfaction. I have learned a lot and have now rebuilt a few bikes. I now do all the work on my bikes.
I say go for it.
Last edited by delbiker1; 06-17-20 at 02:31 PM. Reason: text correction
#7
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,054
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,804 Times
in
1,408 Posts
I believe the technical phrase is easy peasy one two threesy.
Likes For iab:
#8
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,328
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,836 Times
in
2,229 Posts
Good pics get good advice on this forum.
The right tools get the job done.
Money buys the parts. Friends help.
Patience gets the build finished well. Friends help.
Skills required - basic, with the tools and support.
Strong hands for tires (and a few other tasks) help..
Satisfaction level on a job completed = sky high.
Most of my bikes came to me as framesets.
The right tools get the job done.
Money buys the parts. Friends help.
Patience gets the build finished well. Friends help.
Skills required - basic, with the tools and support.
Strong hands for tires (and a few other tasks) help..
Satisfaction level on a job completed = sky high.
Most of my bikes came to me as framesets.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 06-17-20 at 03:06 PM.
#9
Member
Thread Starter
Join Date: May 2020
Location: Royal Palm Beach, Florida
Posts: 31
Bikes: 1986 Peugeot Triathlon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
I was interested because of a Peugeot PX10 frame I found. It needs to be repainted, and new decals. I have a large amount of normal hand tools, plus some specialized bike tools.
#10
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3888 Post(s)
Liked 6,488 Times
in
3,211 Posts
If you can turn a screw ...
Likes For SurferRosa:
#11
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,006
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,601 Times
in
1,764 Posts
Looking forward to the build thread!
#12
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,328
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,836 Times
in
2,229 Posts
there are many threads on stripping/painting.
From DIY, to powdercoat, to full pro level paint.
From DIY, to powdercoat, to full pro level paint.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#13
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
But yes, a PX10 is definitely a frame worth taking the time to do right. You will define "right" for you, whether that means a period correct build or one with functional modifications, but if it fits, the PX10 is worth holding onto, even if you take other simpler projects in the meantime to learn more. That's what I did with my Motobecane, which started as a bare frame and has been built up twice so far: https://www.bikeforums.net/classic-v...new-hobby.html
#14
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,925
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,093 Times
in
640 Posts
It takes a bit of contemplation and the realization that there are different measurements for some components of French bikes of that era from the components used on British, Japanese and Italian bicycles. The rest of it is very do-able with a couple bicycle-specific tools. A crank fastener, proper freewheel tools, bottom bracket spanners, pedal wrench, chain tool. You can get by with those and a pretty much standard wrenches and allen keys.
__________________
In search of what to search for.
In search of what to search for.
#15
Senior Member
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,749
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 702 Post(s)
Liked 672 Times
in
420 Posts
These threads will give you some idea of what to expect, I spent relatively very little money ( tires, tubes, cables, brake pads, hb tape), but LOTS of time...
https://www.bikeforums.net/classic-v...1-headset.html
https://www.bikeforums.net/classic-v...ket-crank.html
https://www.bikeforums.net/classic-v...-3-brakes.html
https://www.bikeforums.net/classic-v...railleurs.html
https://www.bikeforums.net/classic-v...alignment.html
https://www.bikeforums.net/classic-v...-6-pedals.html
https://www.bikeforums.net/classic-v...1-headset.html
https://www.bikeforums.net/classic-v...ket-crank.html
https://www.bikeforums.net/classic-v...-3-brakes.html
https://www.bikeforums.net/classic-v...railleurs.html
https://www.bikeforums.net/classic-v...alignment.html
https://www.bikeforums.net/classic-v...-6-pedals.html
Last edited by branko_76; 06-17-20 at 06:44 PM.
Likes For branko_76:
#16
Member
Thread Starter
Join Date: May 2020
Location: Royal Palm Beach, Florida
Posts: 31
Bikes: 1986 Peugeot Triathlon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
I already have a 1986 Peugeot Triathlon. I was looking for a replacement that didn’t have a quilled seatpost.
#17
Senior Member
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,749
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 702 Post(s)
Liked 672 Times
in
420 Posts
#18
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,752 Times
in
939 Posts
First, when you say from the ground up, I hope that that does not mean starting with a frame/fork set only. That would take a great deal of the fun out of the project which you just might never complete.
No, start with a complete bike that you can disassemble, learning as you do so. Take pics to assist with proper reassembly. Clean, lubricate, replace cables, cable casings, brake pads and, of course, tires. Then start putting the bike back together. Tuning is the last thing you need to learn how to do. Learning..?
You are at the right place to learn right now. The Bike Forums is a great place to glean information and seek assistance. Parts and accessories can also be found on the For Sale forum, a more than worth while forum to join.
But, before you buy, make sure the bike fits. If you don't know to determine that, then, once again - you are in the right place. Just ask and you just might be surprised at how much information can come back.
Best of luck and show us what you find, once you have your ten post limit reached.
No, start with a complete bike that you can disassemble, learning as you do so. Take pics to assist with proper reassembly. Clean, lubricate, replace cables, cable casings, brake pads and, of course, tires. Then start putting the bike back together. Tuning is the last thing you need to learn how to do. Learning..?
You are at the right place to learn right now. The Bike Forums is a great place to glean information and seek assistance. Parts and accessories can also be found on the For Sale forum, a more than worth while forum to join.
But, before you buy, make sure the bike fits. If you don't know to determine that, then, once again - you are in the right place. Just ask and you just might be surprised at how much information can come back.
Best of luck and show us what you find, once you have your ten post limit reached.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
Likes For chobbs77:
#20
Senior Member
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,749
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 702 Post(s)
Liked 672 Times
in
420 Posts
good luck with your project...
#21
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,045
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,386 Times
in
3,671 Posts
#22
Senior Member
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,749
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 702 Post(s)
Liked 672 Times
in
420 Posts
Likes For branko_76:
#23
Junior Member
Join Date: Jun 2017
Location: Northern CA
Posts: 189
Bikes: 1971 Gitane TDF, 1974 Gitane Interclub, 2001 Serotta Rapid Tour CS3, 1986 Bruce Gordon touring bike, 1972 Gitane Super Corsa, 1978 Michal Johnson, 1972 Lambert Professional Grand Prix, 1983 Vitus (resto project), 1972 Raleigh Professional (resto)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 43 Post(s)
Liked 34 Times
in
19 Posts
Building a bike is fun and a great learning experience only exceeded by riding it!
You won’t find a better support community than the BF crowd - incredibly knowledgeable and generous with ideas, advice, feedback and frequently, parts.
Only suggestion would be to make sure that you post photos before, during, and after so that the rest of us get to watch the magic happen!
You won’t find a better support community than the BF crowd - incredibly knowledgeable and generous with ideas, advice, feedback and frequently, parts.
Only suggestion would be to make sure that you post photos before, during, and after so that the rest of us get to watch the magic happen!
#24
Full Member
Join Date: Mar 2017
Location: Arnhem NL
Posts: 230
Bikes: Might as well, now that I am here...
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Liked 78 Times
in
66 Posts
I've sold mine (a 1987 one), still have some regrets.
#25
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,331
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 886 Post(s)
Liked 998 Times
in
525 Posts
It is easy if you are mechanically inclined, have a good reference and lots of money.
I started with this
to this
then this
needed the parts for another project and ended up making a single speed.
Searching Ebay for parts will save some money and browsing the for sale forum here works also.
I started with this
to this
then this
needed the parts for another project and ended up making a single speed.
Searching Ebay for parts will save some money and browsing the for sale forum here works also.
Last edited by bwilli88; 06-18-20 at 05:53 AM.