For the love of English 3 speeds...
Senior Member
This 3 speed has been hanging out on the Portland, OR CL for a few months, asking $300:
"OK first things first..this Bicycle looks like it just came off the showroom floor! This made in Norway DBS or (Den Beste Sykkel) translated The Best Bicycle... all original down the the tires and equipped with a Torpedo Sachs made in west germany 3 speed... DBS is in excellent condition and rides beautifully. It has dual brakes... coaster brake and Front Drum brake. Front and rear lights are generator activated and work great. Standover height is 30.5 inches. Thanks for looking Mark Local Pick up only"
"OK first things first..this Bicycle looks like it just came off the showroom floor! This made in Norway DBS or (Den Beste Sykkel) translated The Best Bicycle... all original down the the tires and equipped with a Torpedo Sachs made in west germany 3 speed... DBS is in excellent condition and rides beautifully. It has dual brakes... coaster brake and Front Drum brake. Front and rear lights are generator activated and work great. Standover height is 30.5 inches. Thanks for looking Mark Local Pick up only"
Senior Member
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,342
Bikes: Still have a few left!
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 467 Post(s)
Liked 532 Times
in
267 Posts
There was also a fairly good looking late 50's-early60's, 3 spd, ladies Schwinn Traveler for only $25 in Vancouver for a while, but expired now. When it 1st showed up, I suggested overhauling it for Mrs. ollo, but she wasn't even a little bit interested. Looked to have good blue paint & nice decals too. Don
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
Now.
Cathydone1.JPG
Last edited by thumpism; 11-30-16 at 11:36 AM.
Senior Member
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,342
Bikes: Still have a few left!
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 467 Post(s)
Liked 532 Times
in
267 Posts
Very nice! I think it's a male/female thing, or, as one of my grand daughters remarked about a drop bar road bike I gave her a few years ago, "They're not in style anymore". I don't get it, tons of style in my book. Don
Old Boy
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
A winter's worth of love went into this `67 Dunelt. But when Spring came along, and I presented this to my then 16 year-old daughter, she told me it was too "old and rickety" for her. This, after I built up an alloy front wheel for better braking, repacked the bottom bracket and headset with new balls, tuned it and tweaked it and devised a front basket setup strong enough to carry her considerable load of camera equipment on those creamy new Schwalbe tires. All for naught.
So I traded it for a Raysport 531 Turismo frame, and I'm building that into the ultimate British-style Light Roadster. She's saving for a car...
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Man, I wonder how many fathers go through this.
A winter's worth of love went into this `67 Dunelt. But when Spring came along, and I presented this to my then 16 year-old daughter, she told me it was too "old and rickety" for her. This, after I built up an alloy front wheel for better braking, repacked the bottom bracket and headset with new balls, tuned it and tweaked it and devised a front basket setup strong enough to carry her considerable load of camera equipment on those creamy new Schwalbe tires. All for naught.
So I traded it for a Raysport 531 Turismo frame, and I'm building that into the ultimate British-style Light Roadster. She's saving for a car...
A winter's worth of love went into this `67 Dunelt. But when Spring came along, and I presented this to my then 16 year-old daughter, she told me it was too "old and rickety" for her. This, after I built up an alloy front wheel for better braking, repacked the bottom bracket and headset with new balls, tuned it and tweaked it and devised a front basket setup strong enough to carry her considerable load of camera equipment on those creamy new Schwalbe tires. All for naught.
So I traded it for a Raysport 531 Turismo frame, and I'm building that into the ultimate British-style Light Roadster. She's saving for a car...
__________________
Inflate Hard
Inflate Hard
elcraft
Where did you spot these tubes?
Senior Member
Join Date: Jul 2009
Location: Boston, MA
Posts: 1,541
Bikes: Bianchi Volpe, ANT 3-speed roadster, New Albion Privateer singlespeed, Raleigh One Way singlespeed, Raleigh Professional "retro roadie" rebuild, 198? Fuji(?) franken-5-speed, 1937 Raleigh Tourist, 1952 Raleigh Sports, 1966 Raleigh Sports step-through
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Liked 27 Times
in
18 Posts
I still need to order a bunch of parts, and some of what's shown is stuff that I'm only using to help visualize things, but here are a couple progress shots of my ANT roadster project, compared to my 1937 Raleigh that I'm modeling it after:
Banned
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 424 Times
in
283 Posts
Senior Member
And some folks like the "idea" of having/riding a bike, as long as it's just an idea. When the idea presents itself as reality, then all the sudden they have second thoughts.
Senior Member
Join Date: Mar 2008
Posts: 1,514
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 231 Post(s)
Likes: 0
Liked 10 Times
in
9 Posts
Getting ready to order spokes for my Superbe. Are they the standard 14ga that i want? Danscomp has them for .25 each which is a great deal but im not sure if that is the correct gauge. I ordered them once before but they only take phone orders and cant recall what i ordered the last time. Here is what im looking at currently. https://www.danscomp.com/products/43...14G_Spoke.html
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 443 Times
in
288 Posts
Nice bike, but $1500!!!
A local Kijiji ad has this BSA listed at a massive $!500.00. I doubt he'l get many calls...
Bike Doctor
Join Date: May 2015
Location: Southern Ontario
Posts: 141
Bikes: Norco Cape Cod tandem, KHS Tandemania Cross, 1952 Claud Butler ladyback tandem, 1971 & '73 Raleigh Suberbes, 1985 Gazelle Sport Solide, 1985 Rossi professional
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 58 Post(s)
Liked 52 Times
in
24 Posts
[QUOTE=DQRider;19224018]Man, I wonder how many fathers go through this.
A winter's worth of love went into this `67 Dunelt. But when Spring came along, and I presented this to my then 16 year-old daughter, she told me it was too "old and rickety" for her. This, after I built up an alloy front wheel for better braking, repacked the bottom bracket and headset with new balls, tuned it and tweaked it and devised a front basket setup strong enough to carry her considerable load of camera equipment on those creamy new Schwalbe tires. All for naught.
My 22 yr old daughter and I restored this Superbe. She worked about two or three hours on it, and the other 40 by me.. but rides it from time to time, even going with me on a wine tour this summer.
She plans to get her friends and borrow some of the vintage fleet off me so the girls can all go...
At least it's not sports cars!
A winter's worth of love went into this `67 Dunelt. But when Spring came along, and I presented this to my then 16 year-old daughter, she told me it was too "old and rickety" for her. This, after I built up an alloy front wheel for better braking, repacked the bottom bracket and headset with new balls, tuned it and tweaked it and devised a front basket setup strong enough to carry her considerable load of camera equipment on those creamy new Schwalbe tires. All for naught.
My 22 yr old daughter and I restored this Superbe. She worked about two or three hours on it, and the other 40 by me.. but rides it from time to time, even going with me on a wine tour this summer.
She plans to get her friends and borrow some of the vintage fleet off me so the girls can all go...
At least it's not sports cars!
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,055 Times
in
1,255 Posts
Senior Member
Join Date: Apr 2012
Location: Toronto
Posts: 2,572
Bikes: 1971 Hercules, 1978 Raleigh Superbe, 1978 Raleigh Tourist, 1964 Glider 3 Speed, 1967 Raleigh Sprite 5 Speed, 1968 Hercules AMF 3 Speed, 1972 Raleigh Superbe, 1976 Raleigh Superbe, 1957 Flying Pigeon, 1967 Dunelt 3 Speed
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1028 Post(s)
Liked 443 Times
in
288 Posts
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,055 Times
in
1,255 Posts
In good condition, the Lucas King of the Road Challis bell is worth $50 to the right buyer.
Senior Member
Join Date: Nov 2007
Posts: 3,720
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 317 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
This 3 speed has been hanging out on the Portland, OR CL for a few months, asking $300:
"OK first things first..this Bicycle looks like it just came off the showroom floor! This made in Norway DBS or (Den Beste Sykkel) translated The Best Bicycle... all original down the the tires and equipped with a Torpedo Sachs made in west germany 3 speed... DBS is in excellent condition and rides beautifully. It has dual brakes... coaster brake and Front Drum brake. Front and rear lights are generator activated and work great. Standover height is 30.5 inches. Thanks for looking Mark Local Pick up only"
"OK first things first..this Bicycle looks like it just came off the showroom floor! This made in Norway DBS or (Den Beste Sykkel) translated The Best Bicycle... all original down the the tires and equipped with a Torpedo Sachs made in west germany 3 speed... DBS is in excellent condition and rides beautifully. It has dual brakes... coaster brake and Front Drum brake. Front and rear lights are generator activated and work great. Standover height is 30.5 inches. Thanks for looking Mark Local Pick up only"
The expert is here: Restureringsverksted 1890 - 1990 : Den Rustne Eike
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
The stem on this bike is not original. It is missing its rear rack. The crank is a "Fauber crank", different from other similar cranks and common all over scandinavia in those days. They all had that drum brake.
The expert is here: Restureringsverksted 1890 - 1990 : Den Rustne Eike
The expert is here: Restureringsverksted 1890 - 1990 : Den Rustne Eike
__________________
Inflate Hard
Inflate Hard
Senior Member
Join Date: Sep 2009
Location: USA
Posts: 2,067
Bikes: 84 Pinarello Trevisio, 86 Guerciotti SLX, 96 Specialized Stumpjumper, 2010 Surly Cross Check, 88 Centurion Prestige, 73 Raleigh Sports, GT Force, Bridgestone MB4
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Liked 71 Times
in
56 Posts
Oddly, my 21 inches Raleighs and my two 23 inch frames have the same top tube length. Not only that, one of my 21s, my coffee colored coffee cruiser, is 1/3 inch longer in the top tube than either of my 23 inch frames. But I would like to get one of those Sunlight stems with a little more reach.
I am normal sized, but fore and aft, I feel a little scrunched on these E3S bikes.
I am normal sized, but fore and aft, I feel a little scrunched on these E3S bikes.
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Oh yeah, the SunLite stem is the way to go if you're tall and want to ride a 21" bike. They make a 10" long 21.1mm touring stem that also gives you about 2" more reach. The clamp is for 1" bars and Raleigh bars are 15/16" so you need a 1/32" shim if you're going to use the original bars. I think soft metal like copper work best. Lately, I've been using lead chimney flashing. I keep hammering it down and trimming the sides until I get a nice fit. Works great, never slips.
__________________
Inflate Hard
Inflate Hard
Last edited by BigChief; 12-03-16 at 11:33 AM.
Senior Member
Join Date: Sep 2009
Location: USA
Posts: 2,067
Bikes: 84 Pinarello Trevisio, 86 Guerciotti SLX, 96 Specialized Stumpjumper, 2010 Surly Cross Check, 88 Centurion Prestige, 73 Raleigh Sports, GT Force, Bridgestone MB4
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Liked 71 Times
in
56 Posts
Oh yeah, the SunLite stem is the way to go if you're tall and want to ride a 21" bike. They make a 10" long 21.1mm touring stem that also gives you about 2" more reach. The clamp is for 1" bars and Raleigh bars are 15/16" so you need a 1/32" shim if you're going to use the original bars. I think soft metal like copper work best. Lately, I've been using lead chimney flashing. I keep hammering it down and trimming the sides until I get a nice fit. Works great, never slips.
Thanks, good info.I have some copper and brass shim material. These can be bought a machine tool type and mechanics shops. I think I will look into one.
But, like I said, the 21 inch bike is bigger than the 23, I am not sure why Raleigh bothered with sizes because raising or lowering the top tube without lengthening or shortening the top tube is not a different size bike frame, it is just the same size bike frame with a lower or higher choice of top tubes. Weird. I prefer the 21 with the linger top tube, feels better.
On the road
Join Date: Aug 2005
Location: New England
Posts: 2,176
Bikes: Old Schwinns and old Raleighs
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 373 Post(s)
Liked 857 Times
in
327 Posts
This 1941 Schwinn roadster had been stripped of its parts. I bought the bike because I had a bunch of 1940s-era parts for it. I bought the handful of things I needed to finish it. Before and after:
__________________
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
Old Boy
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
How does it ride?
Senior Member
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,342
Bikes: Still have a few left!
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 467 Post(s)
Liked 532 Times
in
267 Posts
"She worked about two or three hours on it, and the other 40 by me.."
That's actually a pretty good division of labor for kids/grand kids. Don
That's actually a pretty good division of labor for kids/grand kids. Don
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Wow, great job. Glad this frame found it's way to someone that could do a quality restoration like this.
__________________
Inflate Hard
Inflate Hard