Upgrading Brompton to Magura HS11 hydraulic brakes?
#27
Senior Member
Join Date: Feb 2017
Posts: 1,543
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Likes: 0
Liked 247 Times
in
211 Posts
It seems to me difficult to enter the hose into the bottom of the fork.
Why would you like to use the Magura ?
If it is to improve the braking performances, its possible to have an excellent braking power by changing the caliper and the lever (original caliper and original lever aren't rigid enough).
Even if they are hydraulic, the Magura remain rim brakes with the pros and cons of rim brakes.
Why would you like to use the Magura ?
If it is to improve the braking performances, its possible to have an excellent braking power by changing the caliper and the lever (original caliper and original lever aren't rigid enough).
Even if they are hydraulic, the Magura remain rim brakes with the pros and cons of rim brakes.
#28
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,497
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 118 Times
in
99 Posts
Because it'd be a cheaper alternative to get better brakes. Ridea and Cane Creeks are way more expensive.
So would a U plate + HS22/33 (today's HS11 have a bad reputation) be a terrible idea?
So would a U plate + HS22/33 (today's HS11 have a bad reputation) be a terrible idea?
#29
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,497
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 118 Times
in
99 Posts
Message from Magura: "As I am not familiar with this adapter plate shown in your links I would be unable to give you an answer here although we used to offer a very similar system several years ago. The best bet would be to get in touch with Brompton themselves as they have many customers like yourself who are and have changed to Magura brakes."
Therefore surprised to find so few pictures when googling "Brompton Magura", especially ignoring Emanuel Ferretti's custom fork + triangle.
If so many Brompton users did install Magura hydraulic rim brakes, why so few hits?
--
Edit: Unsurprisingly, Brompton doesn't even want to hear about that monstrosity:
"Since brake calipers are considered critical parts for safety reasons, we can only recommend Brompton brake components parts. We suggest you do so, due to the fact that the modification will also invalidate the warranty on your bike."
Therefore surprised to find so few pictures when googling "Brompton Magura", especially ignoring Emanuel Ferretti's custom fork + triangle.
If so many Brompton users did install Magura hydraulic rim brakes, why so few hits?
--
Edit: Unsurprisingly, Brompton doesn't even want to hear about that monstrosity:
"Since brake calipers are considered critical parts for safety reasons, we can only recommend Brompton brake components parts. We suggest you do so, due to the fact that the modification will also invalidate the warranty on your bike."
Last edited by Winfried; 12-09-20 at 08:09 AM.
#30
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,497
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 118 Times
in
99 Posts
As an alternative to a U plate, what about a pair of "V-brake adapter mount clamps" (from Evolution Bike, Identiti, etc.) and a so-called brake booster (from Magura or elsewhere) for added strength?
https://www.bikeforums.net/mountain-...ake-posts.html
https://www.bikeforums.net/mountain-...ake-posts.html
#31
Junior Member
Join Date: Nov 2020
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
drilling might need to be done on the handlebar, we can then run the brake hose along handlebar, stem then head tube (provided a hollow stem bolt is used) and exit from bottom of the fork steerer.
#32
Junior Member
Join Date: Nov 2020
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It seems to me difficult to enter the hose into the bottom of the fork.
Why would you like to use the Magura ?
If it is to improve the braking performances, its possible to have an excellent braking power by changing the caliper and the lever (original caliper and original lever aren't rigid enough).
Even if they are hydraulic, the Magura remain rim brakes with the pros and cons of rim brakes.
Why would you like to use the Magura ?
If it is to improve the braking performances, its possible to have an excellent braking power by changing the caliper and the lever (original caliper and original lever aren't rigid enough).
Even if they are hydraulic, the Magura remain rim brakes with the pros and cons of rim brakes.
#34
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,497
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 118 Times
in
99 Posts
Because of the oval shape?
Back in 2014, someone in Germany apparently used a U plate ("U-Bügel"). Tektro also makes U plates.
Back in 2014, someone in Germany apparently used a U plate ("U-Bügel"). Tektro also makes U plates.
Last edited by Winfried; 12-10-20 at 09:58 AM.
Likes For zebede:
#36
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,497
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 118 Times
in
99 Posts
Thanks for the tip.
According to the user who replaced the pre-2012 Brompton levers + single pivot callipers with those HS22 Magura brakes: Today's levers + dual pivot callipers are just as good, so going Magura is no longer worth the trouble.
So, to improve braking power on the cheap, get good quality housing + cable and brake pads. If money's not an issue, consider alternative levers and callipers from Ridea and Cane Creek.
Incidently, does someone know if (Brompton) levers and/or brake callipers wear out after a few years of frequent use? Are they worth changing?
According to the user who replaced the pre-2012 Brompton levers + single pivot callipers with those HS22 Magura brakes: Today's levers + dual pivot callipers are just as good, so going Magura is no longer worth the trouble.
So, to improve braking power on the cheap, get good quality housing + cable and brake pads. If money's not an issue, consider alternative levers and callipers from Ridea and Cane Creek.
Incidently, does someone know if (Brompton) levers and/or brake callipers wear out after a few years of frequent use? Are they worth changing?
Last edited by Winfried; 12-10-20 at 08:07 PM.
#37
Senior Member
Join Date: Feb 2017
Posts: 1,543
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Likes: 0
Liked 247 Times
in
211 Posts
The HS33 with its top center hose output is the worst case. The after market block won't really help
Caliper with the usual top right output are usable with a good hose/cable routing.
Knowing the lack of stiffness of the original post 2013 levers and dual pivot caliper (the old one, seems that the current one are worse), I am really astonished that the Magura doesn't provide better braking.
Note that the Magura do not have enough reach and need the adapter that lower the mounting bolt, so you could as well use other short reach road calipers with enough space for 35mm tires (the eeBrakes aren't specified for 35mm tires and nevertheless seem to accept 35mm tires).
There are several excellent short reach road dual pivot caliper not very expensive like the latest Ultegra that you could try.
Caliper with the usual top right output are usable with a good hose/cable routing.
Knowing the lack of stiffness of the original post 2013 levers and dual pivot caliper (the old one, seems that the current one are worse), I am really astonished that the Magura doesn't provide better braking.
Note that the Magura do not have enough reach and need the adapter that lower the mounting bolt, so you could as well use other short reach road calipers with enough space for 35mm tires (the eeBrakes aren't specified for 35mm tires and nevertheless seem to accept 35mm tires).
There are several excellent short reach road dual pivot caliper not very expensive like the latest Ultegra that you could try.
#38
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,497
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 118 Times
in
99 Posts
I'm especially annoyed with Brompton's current solution while riding downhill and/or in the rain, especially with a heavy-loaded bike and compared to hydraulic disk brakes.
Note that the Magura do not have enough reach and need the adapter that lower the mounting bolt, so you could as well use other short reach road calipers with enough space for 35mm tires (the eeBrakes aren't specified for 35mm tires and nevertheless seem to accept 35mm tires). There are several excellent short reach road dual pivot caliper not very expensive like the latest Ultegra that you could try.
Considering "short-reach calipers limit tire clearance to about 28mm without fenders; with full-coverage fenders, you've got about 23mm—and that's if you can squeeze those fenders in." (Source), shouldn't a Brompton be fit with medium-reach calipers?
Last edited by Winfried; 12-10-20 at 08:36 PM.
#39
Senior Member
Join Date: Feb 2017
Posts: 1,543
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Likes: 0
Liked 247 Times
in
211 Posts
I based my response on the first pictures where you see that the Magura are mounted with an adapter that lower the caliper mounting.
Another model wide top side hose output instead of top center would I think be usable.
Yes, with short reach road caliper you won't be able to mount a front fender between the caliper and the tire.
The trick is to place the fender behind the caliper = to stop the fender just behind the caliper attached to the fork with the original caliper hole of the fork and not with the lowered caliper bolt.
Such a mounting of the front fender doesn't reduce the protection of the fender because its the rear part of the fender = the one behind the fork that protect the cyclist. The only drawback of such a fender mounting is that the caliper itself isn't protected from dirt.
Shimano Ultegra can be found at a not so high price
The Shimano 105 are very similar and cheaper.
About the tire width, road calipers are specified for max 28mm tires. But some accept wider tires. This is the case of the Cane Creek eeBrakes for instance.
Now why short reach road calipers: its because the weak braking f long reach comes first from the longer reach = longer arms of the caliper.
TI Parts Workshop proposes longer arms for the eeBrakes, I wouldn't dare to use them because I fear that these longer arms will ruin the exceptional braking performances of the eeBrakes.
Another model wide top side hose output instead of top center would I think be usable.
Yes, with short reach road caliper you won't be able to mount a front fender between the caliper and the tire.
The trick is to place the fender behind the caliper = to stop the fender just behind the caliper attached to the fork with the original caliper hole of the fork and not with the lowered caliper bolt.
Such a mounting of the front fender doesn't reduce the protection of the fender because its the rear part of the fender = the one behind the fork that protect the cyclist. The only drawback of such a fender mounting is that the caliper itself isn't protected from dirt.
Shimano Ultegra can be found at a not so high price
The Shimano 105 are very similar and cheaper.
About the tire width, road calipers are specified for max 28mm tires. But some accept wider tires. This is the case of the Cane Creek eeBrakes for instance.
Now why short reach road calipers: its because the weak braking f long reach comes first from the longer reach = longer arms of the caliper.
TI Parts Workshop proposes longer arms for the eeBrakes, I wouldn't dare to use them because I fear that these longer arms will ruin the exceptional braking performances of the eeBrakes.
#40
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,497
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 118 Times
in
99 Posts
Thanks much for the infos.
Do short reach calipers all require an adapter to lower it enough and reach the Brompton's rim?
I wanted to see what it looks like when folding a Brompton that has a standard, top + right caliper, but Google returns few hits with "Brompton Shimano caliper". I guess the few who want more braking power than provided with today's Brompton caliper + lever shell out and go Ridea/Cane Creek.
With a standard road caliper: Is having the cable exposed after folding a real issue, or just something to pay attention to?
Do short reach calipers all require an adapter to lower it enough and reach the Brompton's rim?
I wanted to see what it looks like when folding a Brompton that has a standard, top + right caliper, but Google returns few hits with "Brompton Shimano caliper". I guess the few who want more braking power than provided with today's Brompton caliper + lever shell out and go Ridea/Cane Creek.
With a standard road caliper: Is having the cable exposed after folding a real issue, or just something to pay attention to?
Last edited by Winfried; 12-11-20 at 06:29 AM.
#41
Senior Member
Join Date: Feb 2017
Posts: 1,543
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Likes: 0
Liked 247 Times
in
211 Posts
Yes, a short reach is too short to reach the Brompton rim from the fork caliper hole, if the reach would be long enough, it wouldn't be a short reach.
The Cane Creek eeBrake has normally a top center cable output (actually, almost center). Its an adapter that reverse its cable output to the bottom left (the cable run from bottom left to top center, the adapter reverse that, making the cable running from top center to bottom left).
I haven't tried to mount a usual top right output caliper on the Brompton (I only did it with another bike equipped with a Brompton front carrier block, its compatible with the front block but this bike us not a folding bike, the caliper is a Campagnolo Super Record dual pivot skeleton). so don't know how it impact folding. I would guess that it depend if the front brake is on the left or right hand.
Note that there is another trick to use short reach where a longer reach is needed = extension brake shoes there are several brands offering such kind of brake shoes these one add 9.5mm. Ridea has another type adding 6.6mm.
The Cane Creek eeBrake has normally a top center cable output (actually, almost center). Its an adapter that reverse its cable output to the bottom left (the cable run from bottom left to top center, the adapter reverse that, making the cable running from top center to bottom left).
I haven't tried to mount a usual top right output caliper on the Brompton (I only did it with another bike equipped with a Brompton front carrier block, its compatible with the front block but this bike us not a folding bike, the caliper is a Campagnolo Super Record dual pivot skeleton). so don't know how it impact folding. I would guess that it depend if the front brake is on the left or right hand.
Note that there is another trick to use short reach where a longer reach is needed = extension brake shoes there are several brands offering such kind of brake shoes these one add 9.5mm. Ridea has another type adding 6.6mm.
Likes For Jipe:
#43
Junior Member
Join Date: Nov 2020
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#44
Senior Member
Join Date: Aug 2014
Location: UK
Posts: 743
Bikes: Dahon Jetstream p8 (sold), customized Dahon Helios x10, customzed Dahon Smooth Hound x11,customized Dahon Hammerhead 8.0 d7, Planet X Free Ranger (mullet setup 1x11), Planet X Giovanissimi 20 (1x9), Frog 52 (1x9) and Frog 48 1s
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 264 Post(s)
Liked 240 Times
in
176 Posts
The h33 were fitted on Dahon jetstream (mid 2000's model). I have a 2007 model which came after with v brake. I went to the local Dahon dealer ~10yrs ago and asked about retrofitting these and was advised against it as they seem to eat rims quickly.
My mother have them on her german e bike instead of disk brake and after 1 year there is already a grove in the rim.
It was a "good" idea in MTB competition when disc didn't really exist but nowadays, it's not great. if it was good it would be more common. another issue is the weight.
My mother have them on her german e bike instead of disk brake and after 1 year there is already a grove in the rim.
It was a "good" idea in MTB competition when disc didn't really exist but nowadays, it's not great. if it was good it would be more common. another issue is the weight.
#45
Senior Member
Join Date: Aug 2014
Location: UK
Posts: 743
Bikes: Dahon Jetstream p8 (sold), customized Dahon Helios x10, customzed Dahon Smooth Hound x11,customized Dahon Hammerhead 8.0 d7, Planet X Free Ranger (mullet setup 1x11), Planet X Giovanissimi 20 (1x9), Frog 52 (1x9) and Frog 48 1s
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 264 Post(s)
Liked 240 Times
in
176 Posts
These will cause less damage; less paint rubbing thanks to the silicone outter sleeve
https://www.goodridge.co.uk/products/firesleeve
( I used it on every oil line susceptible to rub again race car chassis and bodywork)
#46
Senior Member
Join Date: Aug 2014
Location: UK
Posts: 743
Bikes: Dahon Jetstream p8 (sold), customized Dahon Helios x10, customzed Dahon Smooth Hound x11,customized Dahon Hammerhead 8.0 d7, Planet X Free Ranger (mullet setup 1x11), Planet X Giovanissimi 20 (1x9), Frog 52 (1x9) and Frog 48 1s
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 264 Post(s)
Liked 240 Times
in
176 Posts
Are the Sram drop (red/force/rival etc.) the same ratio as the Sram eagle?
#47
Senior Member
Join Date: Aug 2014
Location: UK
Posts: 743
Bikes: Dahon Jetstream p8 (sold), customized Dahon Helios x10, customzed Dahon Smooth Hound x11,customized Dahon Hammerhead 8.0 d7, Planet X Free Ranger (mullet setup 1x11), Planet X Giovanissimi 20 (1x9), Frog 52 (1x9) and Frog 48 1s
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 264 Post(s)
Liked 240 Times
in
176 Posts
Thanks much for the infos.
Do short reach calipers all require an adapter to lower it enough and reach the Brompton's rim?
I wanted to see what it looks like when folding a Brompton that has a standard, top + right caliper, but Google returns few hits with "Brompton Shimano caliper". I guess the few who want more braking power than provided with today's Brompton caliper + lever shell out and go Ridea/Cane Creek.
With a standard road caliper: Is having the cable exposed after folding a real issue, or just something to pay attention to?
Do short reach calipers all require an adapter to lower it enough and reach the Brompton's rim?
I wanted to see what it looks like when folding a Brompton that has a standard, top + right caliper, but Google returns few hits with "Brompton Shimano caliper". I guess the few who want more braking power than provided with today's Brompton caliper + lever shell out and go Ridea/Cane Creek.
With a standard road caliper: Is having the cable exposed after folding a real issue, or just something to pay attention to?
#48
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,497
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 118 Times
in
99 Posts
1) More braking power, especially in the rain and/or steep descents 2) requiring less pressure 3) without costing… an arm.
#49
Senior Member
Join Date: Aug 2014
Location: UK
Posts: 743
Bikes: Dahon Jetstream p8 (sold), customized Dahon Helios x10, customzed Dahon Smooth Hound x11,customized Dahon Hammerhead 8.0 d7, Planet X Free Ranger (mullet setup 1x11), Planet X Giovanissimi 20 (1x9), Frog 52 (1x9) and Frog 48 1s
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 264 Post(s)
Liked 240 Times
in
176 Posts
Then if it's not enough, you could increase the mechanical advantage by either adding a traveller agent or fitting kids brake lever or both
When I put back my dahon in flat bar, I left the travel agent on because my wife needed something easier to actuate. It does the job well and improve braking.
kids brake lever have better pull too. look for tektro JL352-RS
These solutions are easy to fit and inexpensive with great results
#50
Senior Member
Thread Starter
Join Date: Aug 2011
Location: Paris, France
Posts: 2,497
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 573 Post(s)
Liked 118 Times
in
99 Posts
Thanks much for the tips.
Home - Clarks Cycle Systems
Why do shorter brake levers provide stronger braking?
https://hubcycles.co.nz/products/tek...-junior-levers
Looks like "travel agent" is a generic solution. Would that fit on a Brompton?
https://www.parktool.com/blog/repair...and-adjustment
https://problemsolversbike.com/produ..._agents_-_6416
Another issue with not having disk brakes, especiallly with small wheels: Road grime.
Home - Clarks Cycle Systems
Why do shorter brake levers provide stronger braking?
https://hubcycles.co.nz/products/tek...-junior-levers
Looks like "travel agent" is a generic solution. Would that fit on a Brompton?
https://www.parktool.com/blog/repair...and-adjustment
https://problemsolversbike.com/produ..._agents_-_6416
Another issue with not having disk brakes, especiallly with small wheels: Road grime.
Last edited by Winfried; 04-08-21 at 05:30 AM.