Machine built wheels
#1
Senior Member
Thread Starter
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,436
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 566 Post(s)
Liked 1,052 Times
in
545 Posts
Machine built wheels
I have a MTB frame that needs the dropouts filled and I have been poking around the interwebz to see my hub/spoke/rim options for rim brakes and things ain’t great. Almost everything is disc brake and the cost adds up quickly. I want to go all new since most of the 26” used stuff I have found seems to be in rough condition.
I was poking around Universal Cycles website and I can get a set of decent machine built wheels for ~$200. Anyone have any experience with machine built wheels? All new stuff for $200 (assembled!) seems like a win.
Thanks for the feedback!
I was poking around Universal Cycles website and I can get a set of decent machine built wheels for ~$200. Anyone have any experience with machine built wheels? All new stuff for $200 (assembled!) seems like a win.
Thanks for the feedback!
#2
Lost
The low cost machine built wheels usually use boat anchor hubs and straight gauge spokes which make for heavy riding, sluggish wheels in my experience. What hubs, spoked and rims is this $200 set using? What are you planning on using this bike for?
__________________
https://less-than-epic.blogspot.com/
https://less-than-epic.blogspot.com/
#3
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,801 Times
in
2,285 Posts
And machine built wheels can be built with quality components. Wheelsmith was pretty famous for high quality, machine built wheels BITD, no one complained about them back then. The fact that they're $200 for a set tells me the components are pretty cheap, which you alluded to.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Last edited by gugie; 03-08-23 at 10:32 AM.
Likes For gugie:
#4
Senior Member
Join Date: Jun 2019
Location: Michigan USA
Posts: 887
Bikes: A bunch of old bikes.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Liked 872 Times
in
418 Posts
I bought a set of DT Swiss 700c wheels with Shimano Disc Thru axle hubs that were machine built a couple of years ago.
They were true when I received them, but I went through checking the spoke tension anyway.
I think the machine does the tensioning the fastest way it can, keeping the wheel true and round. This resulted in uneven tension in a couple of spots. By taking my time, I re-tensioned and got it much more consistent. I haven't had any real problems with the set.
They were true when I received them, but I went through checking the spoke tension anyway.
I think the machine does the tensioning the fastest way it can, keeping the wheel true and round. This resulted in uneven tension in a couple of spots. By taking my time, I re-tensioned and got it much more consistent. I haven't had any real problems with the set.
Likes For daverup:
#5
Retro on steroids
Join Date: Feb 2006
Location: Marin County, California
Posts: 538
Bikes: Breezer Repack 650-B, 2011 Gary Fisher Rumblefish II, Gary Fisher HiFi 29er, 1983 Ritchey Annapurna, 1994 Ritchey P-21, 1978 Breezer #2, 1975 Colnago, Ritchey P-29er
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 154 Post(s)
Liked 625 Times
in
132 Posts
I built all the wheels for the MountainBikes company, until I couldn't keep up.
We visited Wheelsmith in Palo Alto, and I saw that the machine did a better job than I did, in seconds.
We supplied the hubs, spokes and rims, and they did a great job for us. The wheel will reflect the components used.
We visited Wheelsmith in Palo Alto, and I saw that the machine did a better job than I did, in seconds.
We supplied the hubs, spokes and rims, and they did a great job for us. The wheel will reflect the components used.
Likes For Repack Rider:
#6
Senior Member
Thread Starter
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,436
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 566 Post(s)
Liked 1,052 Times
in
545 Posts
Here is one example;
Plain Deore hubs not listed above but in the general description. Like I said, decent but not WOW! Weekend put-around rider, I’m not trying to smash downhill records.
Plain Deore hubs not listed above but in the general description. Like I said, decent but not WOW! Weekend put-around rider, I’m not trying to smash downhill records.
#7
Senior Member
Thread Starter
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,436
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 566 Post(s)
Liked 1,052 Times
in
545 Posts
gugie Sorry, didn’t address your question. Tires in the 2 inch range but that is still undecided.
#8
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,801 Times
in
2,285 Posts
gugie Sorry, didn’t address your question. Tires in the 2 inch range but that is still undecided.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#9
Senior Member
Join Date: Aug 2009
Posts: 2,395
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1562 Post(s)
Liked 1,734 Times
in
974 Posts
If you are buying new MTB rims, do yourself a favor and get tubeless or tubeless ready rims. You'll have to pay more than $200 but you won't regret it. BTW I got used Mavic CrossMax and CrossRoc tubeless 26" wheelsets for both my sons' MTB's. These are true tubeless rims with no spoke holes in the rim bed. I paid $100 for one set and $200 for the other. So they are out there. Keep your eyes peeled.
#10
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,480
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 967 Post(s)
Liked 1,629 Times
in
1,045 Posts
If machine built wheels MBW is what I can afford to keep ridding then bring um on! Yep... I am one of those cheap bastard machine built wheel set guys. I have been quite satisfied with all sets considering the money I saved.
Now days when I get a new Machine Buildt Wheel set I go through a close inspection. I check the quality of the spokes and their installation first. Gauge, length, depth of the nipples, neck, tension and positioning on the hub first. If all that is good then I am ready to go. Often they are not.
So I end up loosening everything up and then retrueing the wheels. Not a rebuild but just a reset.
You can definitely find a set of machine built wheels costing less then it would to buy all the components and build it yourself.
There are many that would recommend a professionally made custom built wheel set. If ya got the money that's thats the way to go...
Now days when I get a new Machine Buildt Wheel set I go through a close inspection. I check the quality of the spokes and their installation first. Gauge, length, depth of the nipples, neck, tension and positioning on the hub first. If all that is good then I am ready to go. Often they are not.
So I end up loosening everything up and then retrueing the wheels. Not a rebuild but just a reset.
You can definitely find a set of machine built wheels costing less then it would to buy all the components and build it yourself.
There are many that would recommend a professionally made custom built wheel set. If ya got the money that's thats the way to go...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#11
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,447
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4236 Post(s)
Liked 2,949 Times
in
1,808 Posts
Bought a set of machine built wheels from velomine a decade or so ago for less than it would have cost me to buy the same hubs for a bike I was building for my wife. Checked the spoke tension and it was all right on and the wheels were true. A decade later, they're still true.
#12
Senior Member
Join Date: Oct 2022
Posts: 1,378
Bikes: a couple
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 563 Post(s)
Liked 863 Times
in
456 Posts
for 50 bucks, the wheels on this thing are decent enough. I've flipped a few of this bike and I've been impressed.
Plus you get parts to trade or flip.
.4]https://offerup.com/item/detail/f9b2219c-10e9-36f4-a3bc-e1c3955b2e00?cid=l].4
Or this set of wheels, with machined brake track and disks, + 9 speed cassette + tires and tubes.
Look to be pretty decent and they've been listed long enough where he'll come down.[/url]
https://portland.craigslist.org/clk/...590302217.html
I'm just a cheapskate.
#13
Senior Member
Thread Starter
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,436
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 566 Post(s)
Liked 1,052 Times
in
545 Posts
Slight derailment - when did through axles become a thing? I am totally ignorant on those but I think they went hand-in-hand with disk brakes?
#14
Senior Member
Join Date: Jul 2014
Posts: 1,490
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1083 Post(s)
Liked 687 Times
in
441 Posts
I was skeptical until I bought a set of Wheelmaster wheels from Velomine. They were well under $200 and they're great. Tension was checked and tweaked but they were very close right out of the box. The rims were Sun CR18 which I have used on a few custom builds, and the Origin 8 hubs are surprisingly nice.
#15
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
I think it probably depends on the machine, but my rule of thumb for automation is "if you can explain, step-by-step, how you do something, it can be automated." From there it's just a matter of refining the process until you get the results you want. Wheel building is a very mechanical process, so apart from choosing the components, I can't see any reason it wouldn't be possible to make a machine that builds better wheels than a human. John Henry won't like it, but this is reality. Humans are obsolete technology.
I've bought some cheap machine-built wheels from VeloMine and then did basic stress-relieving an re-tensioning before using them. I've also bought a similar set from the same source and just ridden it. It needed re-truing in a short time, but it wasn't bad. I'm still using both of those wheelsets quite happily.
You're right that thru axles go hand-in-hand with disc brakes, but thru axles are much more recent. They solve the problem of not being able to mount the wheel without getting rub on the rotors. I want to say they came into common usage around 2012, but I could be off by a few years either way.
I've bought some cheap machine-built wheels from VeloMine and then did basic stress-relieving an re-tensioning before using them. I've also bought a similar set from the same source and just ridden it. It needed re-truing in a short time, but it wasn't bad. I'm still using both of those wheelsets quite happily.
You're right that thru axles go hand-in-hand with disc brakes, but thru axles are much more recent. They solve the problem of not being able to mount the wheel without getting rub on the rotors. I want to say they came into common usage around 2012, but I could be off by a few years either way.
__________________
My Bikes
My Bikes
#16
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,801 Times
in
2,285 Posts
If this were a CR list thread, someone would jump in and say "that's off-topic." If we're talking thru axle, that's not C&V.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#17
Senior Member
Thread Starter
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,436
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 566 Post(s)
Liked 1,052 Times
in
545 Posts
I was skeptical until I bought a set of Wheelmaster wheels from Velomine. They were well under $200 and they're great. Tension was checked and tweaked but they were very close right out of the box. The rims were Sun CR18 which I have used on a few custom builds, and the Origin 8 hubs are surprisingly nice.
Likes For RustyJames:
#18
Senior Member
Join Date: Dec 2005
Posts: 17,159
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3811 Post(s)
Liked 6,709 Times
in
2,613 Posts
I bought a basic set of 26” wheels for my mtb commuter from Velomine and have been very pleased: Sun CR18 rims, basic Shimano non-disc hubs, likely 14g spokes. True out of the box and holding up well through the rigors of winter urban commuting.
#19
Senior Member
Join Date: Jun 2019
Location: Michigan USA
Posts: 887
Bikes: A bunch of old bikes.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Liked 872 Times
in
418 Posts
I don't see it mentioned here, but through axles are not backward compatible with your C&V frame and fork dropouts.
#20
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,801 Times
in
2,285 Posts
wait, what the heck am I talking about?
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#22
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,801 Times
in
2,285 Posts
Yep. I've done some crazy stuff, but that's a no-no.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#23
Full Member
Join Date: Dec 2012
Location: North Seattle
Posts: 387
Bikes: Davidson ’81
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 120 Post(s)
Liked 229 Times
in
121 Posts
I have a set of Velo Mine / Wheel Master machine built wheels. Mine are HED Belgium to 105 hubs with butted DT spokes. They were cheaper pre-built than I could have bought as parts and built myself.
I weigh over 200 lbs and they have survived an STP double century and a couple seasons of commuting just fine. I did nothing to them out of the box and I’ve never had to true them since.
I weigh over 200 lbs and they have survived an STP double century and a couple seasons of commuting just fine. I did nothing to them out of the box and I’ve never had to true them since.
Likes For C9H13N:
#24
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,480
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 967 Post(s)
Liked 1,629 Times
in
1,045 Posts
I was skeptical until I bought a set of Wheelmaster wheels from Velomine. They were well under $200 and they're great. Tension was checked and tweaked but they were very close right out of the box. The rims were Sun CR18 which I have used on a few custom builds, and the Origin 8 hubs are surprisingly nice.
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Likes For zandoval: