1988 Peugeot PXR80 - my new all-roadie
#1
Le savonnier
Thread Starter
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts
1988 Peugeot PXR80 - my new all-roadie
After riding a metric century with gugie and Andy_K the other day (my first ride of over 5 miles in 8 months), aside from being out of shape, I realized I was seriously under-biking riding a 34+ lb. 1980s MTB with 26" wheels—sweet Rene Herse Rat Trap Pass tires notwithstanding. Also, doing that long of a ride without drop bars is a bit of a pain. No variety of positions with those old MTB bars!
After searching far and wide, I have ended up with what appears to be a 1988 Peugeot PXR80, which was considered a touring/rando bike.
It took me a while to identify the model, as I scoured through all the Peugeot USA catalogs from the 80s and turned up no match.
I finally found it in the 1988 French catalog. I was initially thrown off by the total drivetrain change to franken-Shimano (600 tri-color rear derailleur, 105 front derailleur, Golden Arrow cranks), from French drivetrain (this is probably a blessing in disguise! ). Also, the saddle, stem, levers, shifters, and pedals are clearly not stock.
I don't take delivery until Tuesday, so I will be unable to verify it's identity until I get a serial number, but I think it should be a great ride, after I replace the saddle, stem, and pedals. I also have a Shimano 105 (RD-5600) that I may swap for that 600 tri-color. Cranks will probably change (would have been a triple originally), at least smaller rings like 48x32 or 46x30.
After searching far and wide, I have ended up with what appears to be a 1988 Peugeot PXR80, which was considered a touring/rando bike.
It took me a while to identify the model, as I scoured through all the Peugeot USA catalogs from the 80s and turned up no match.
I finally found it in the 1988 French catalog. I was initially thrown off by the total drivetrain change to franken-Shimano (600 tri-color rear derailleur, 105 front derailleur, Golden Arrow cranks), from French drivetrain (this is probably a blessing in disguise! ). Also, the saddle, stem, levers, shifters, and pedals are clearly not stock.
I don't take delivery until Tuesday, so I will be unable to verify it's identity until I get a serial number, but I think it should be a great ride, after I replace the saddle, stem, and pedals. I also have a Shimano 105 (RD-5600) that I may swap for that 600 tri-color. Cranks will probably change (would have been a triple originally), at least smaller rings like 48x32 or 46x30.
#2
Full Member
Join Date: Feb 2013
Location: Worcester, Massachusetts
Posts: 308
Bikes: Fuji Sportif 1.7C, Shogun Metro AT, Jamis Durango SX, Miyata Alumicross, Fuji Special Road Racer, Mongoose ATB, Fuji SST 1.0 Team, Gitane (?), Specialized Rockhopper SS, Univega Gran Turismo, Univega Supra Sport Mixte, Nishiki Tri-A, Diamondback Coil
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 82 Post(s)
Liked 141 Times
in
78 Posts
Super cool, enjoy! I love running into franken-builds where you can tell the person kinda knew what they wanted to do, or at least they had access to decent parts.
#3
Le savonnier
Thread Starter
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts
Yeah, only things I really can't live with are the saddle, stem, and pedals—otherwise it should be a great ride.
Likes For johnnyace:
#4
Senior Member
Looks like it’s in great shape and has excellent clearances, and lots of bottle cage nubs. What’s not to like?
What’s that braze-on for on the back of the seat tube? Light?
What’s that braze-on for on the back of the seat tube? Light?
#5
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,194
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,296 Times
in
866 Posts
Very interesting, looks to have a PH501 level tubeset and fork, and with an interesting combination of construction features to say the least.
I would have never guessed 1988!
I'd be itching to measure the frame angles and TT length, maybe the fork rake as well. Does the catalog give geo numbers?
I could sure see this being an interesting build, I think the frameset is quite worthy.
I would have never guessed 1988!
I'd be itching to measure the frame angles and TT length, maybe the fork rake as well. Does the catalog give geo numbers?
I could sure see this being an interesting build, I think the frameset is quite worthy.
Likes For dddd:
#6
Le savonnier
Thread Starter
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts
Yes, that was where the lever was to release the generator for the light (see this thread).
#8
Le savonnier
Thread Starter
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts
#9
Le savonnier
Thread Starter
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts
The PXR80 arrived today, and my initial investigations point to a probable 1986 model, as I found "86" on the Maillard front hub (presumably original) and, uh, somewhere else that I can't remember at the moment. Assembled it with my spare MKS Sylvans and a Brooks Pro saddle, and took it for a 10 mile shakedown spin. This is a very nice bike.
Now I just need to get rid of that funky stem and the white bar tape, at the very least. And add some Rene Herse tires to replace the brand-new but budget Kenda tires.
Now I just need to get rid of that funky stem and the white bar tape, at the very least. And add some Rene Herse tires to replace the brand-new but budget Kenda tires.
Last edited by johnnyace; 05-11-21 at 08:49 PM. Reason: Added stuff to replace
#10
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,800 Times
in
2,284 Posts
Glad to have helped relight the n+1 desire!
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#11
Full Member
I picked one up that was from 1985, posted it here: https://www.bikeforums.net/classic-v...geot-px80.html One thing I noticed (and you can see in the pics I posted) was that the rear derailleur hanger, which had the original Simplex derailleur, was already configured to accept a Shimano derailleur. So while I left the Simplex derailleur in place, I plan to take it off and replace it with a Suntour or Shimano derailleur, and save the Simplex derailleur for a bike that has a Simplex-specific hanger.
Likes For KenNC:
#12
Le savonnier
Thread Starter
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts
I picked one up that was from 1985, posted it here: https://www.bikeforums.net/classic-v...geot-px80.html One thing I noticed (and you can see in the pics I posted) was that the rear derailleur hanger, which had the original Simplex derailleur, was already configured to accept a Shimano derailleur. So while I left the Simplex derailleur in place, I plan to take it off and replace it with a Suntour or Shimano derailleur, and save the Simplex derailleur for a bike that has a Simplex-specific hanger.
#14
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,800 Times
in
2,284 Posts
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#16
Le savonnier
Thread Starter
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts
Serial number
Finally got around to the serial number:
Y507 10853
So, if I understand Peugeot serial numbers correctly, this would mean this was manufactured in July of 1985.
Y507 10853
So, if I understand Peugeot serial numbers correctly, this would mean this was manufactured in July of 1985.
Last edited by johnnyace; 05-17-21 at 11:05 AM.
#17
Senior Member
Join Date: Jan 2006
Location: Berwyn PA
Posts: 6,408
Bikes: I hate bikes!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 431 Post(s)
Liked 710 Times
in
233 Posts
Nice Score! Nice bke as is and also a great platform to personalize. I would suggest tracking down a set of lighter wheels and seeing how the ride is.
Likes For fender1:
#18
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,479
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 966 Post(s)
Liked 1,629 Times
in
1,045 Posts
Really like those bar end shifters and center-pulls. There are so many nice things about this bike. I have a Franken-PR80 with 34t Bailout on the freewheel and a Compact Crank. I especially like the long easy frame pattern of the PR80s giving it a nice easy ride.
I have always been surprised at how hard it is to ID a bike sometimes. Especially the Peugeots'. Looks like you have this one nailed down. Nice BIKE!
I have always been surprised at how hard it is to ID a bike sometimes. Especially the Peugeots'. Looks like you have this one nailed down. Nice BIKE!
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Likes For zandoval:
#19
Le savonnier
Thread Starter
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts
The ride is very nice! But that wacky (to me, anyway) stem has to go; way too flexy and creaky for me.
Likes For johnnyace:
#21
Le savonnier
Thread Starter
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts
An evolution: new mismatched Mavic wheelset with Shimano 105 hubs and a 9-speed to replace the 6-speed, and a NOS Shimano 105 rear derailleur to replace the Shimano 600 tri-color. Rides like a totally different bike now, buttery smooth and lovely. The Michelin Dynamic Classics are only 23mm, so probably just temporary, but man is this thing comfortable as it stands right now.
Now to deal with that funky stem and the white bar tape...
Now to deal with that funky stem and the white bar tape...
Likes For johnnyace:
#22
Senior Member
Join Date: May 2019
Location: Burien WA
Posts: 512
Bikes: Cannondale Synapse, LeMond Victoire, Bianchi Campione d'Italia, Kona Hei Hei, Ritchey Ultra, Schwinn "Paramount" PDG, '83 Trek 640
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 268 Post(s)
Liked 325 Times
in
211 Posts
I think the the white bar tape (as long as it's clean...) plays off the "Peugeot" lettering very nicely. A Technomic stem might be in order, though!
#23
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
I'd be sorely tempted to take this bike to the CINO ride. It has lots of clearance for fat tires.
#25
Le savonnier
Thread Starter
Join Date: Sep 2016
Location: Oregon
Posts: 1,422
Bikes: I can count 'em on one hand
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 602 Times
in
274 Posts