What year is my Nishiki Continental?
#1
Chipper
Thread Starter
Need help identifying Nishiki Continental
I just picked up what I thought was a 70s Nishiki Continental Touring bike, but now I'm having doubts. I can't find any reference to the Continental prior to 1983, and for a tourer its a pretty bizarre setup.
Only one set of bottle bosses, one set of rack eyelets front and rear, narrowish wheelbase, 700c wheels, and its very, very light, around 22lbs with the rack. The sticker says the frame is double butted cromo, but doesn't specify beyond that. Afaik its all original aside from the extra sprocket. Was the continental originally a high-end road bike?
Only one set of bottle bosses, one set of rack eyelets front and rear, narrowish wheelbase, 700c wheels, and its very, very light, around 22lbs with the rack. The sticker says the frame is double butted cromo, but doesn't specify beyond that. Afaik its all original aside from the extra sprocket. Was the continental originally a high-end road bike?
Last edited by flipchip; 08-04-22 at 09:16 PM.
Likes For flipchip:
#2
Senior Member
Join Date: Dec 2005
Posts: 17,158
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,694 Times
in
2,611 Posts
Likes For nlerner:
#3
Car free since 2018
Join Date: Aug 2017
Location: Vancouver, BC
Posts: 685
Bikes: Mostly japanese ones
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 259 Post(s)
Liked 269 Times
in
134 Posts
Probably 82 or 83 continental. T-mar's post on the serial numbers (check under bottom bracket)
Changed over the years but I think the Continental was their top end touring variant. Didn't get cantis until 84 I think (in Canada).
erial number format XYZZZZZ where:
X is a letter indicating the market using the following codes:
A= Australia
C = Canada (pre-1987*)
E = Europe
K = USA (pre 1985) + non-ferrous frames 1986-1988*)
W = USA (1985-1987*)
Y is a letter indicating the last digit of the manufacturing calendar year, where A =1, B = 2, C = 3… J = 0. Exception is letter S, used on all frames prior to 1975.
ZZZZZ is a five or six digit number, apparently representing a sequential frame manufac turing number for the year (or era in the case of pre 1975 frames)
Example 1: KA24587 is the 24,787th frame produced in 1981 for the US market.
Example 2: CG231117 is the 23,117th frame produced in 1977 for the Canadian market.
Example 3: WE54612 is the 54,612th frame produced in 1985 for the US market.
* Serial number format may extend beyond the stated end date but there are no reported examples, to date.
Changed over the years but I think the Continental was their top end touring variant. Didn't get cantis until 84 I think (in Canada).
erial number format XYZZZZZ where:
X is a letter indicating the market using the following codes:
A= Australia
C = Canada (pre-1987*)
E = Europe
K = USA (pre 1985) + non-ferrous frames 1986-1988*)
W = USA (1985-1987*)
Y is a letter indicating the last digit of the manufacturing calendar year, where A =1, B = 2, C = 3… J = 0. Exception is letter S, used on all frames prior to 1975.
ZZZZZ is a five or six digit number, apparently representing a sequential frame manufac turing number for the year (or era in the case of pre 1975 frames)
Example 1: KA24587 is the 24,787th frame produced in 1981 for the US market.
Example 2: CG231117 is the 23,117th frame produced in 1977 for the Canadian market.
Example 3: WE54612 is the 54,612th frame produced in 1985 for the US market.
* Serial number format may extend beyond the stated end date but there are no reported examples, to date.
Likes For rgvg:
#4
Chipper
Thread Starter
Probably 82 or 83 continental. T-mar's post on the serial numbers (check under bottom bracket)
Changed over the years but I think the Continental was their top end touring variant. Didn't get cantis until 84 I think (in Canada).
erial number format XYZZZZZ where:
X is a letter indicating the market using the following codes:
A= Australia
C = Canada (pre-1987*)
E = Europe
K = USA (pre 1985) + non-ferrous frames 1986-1988*)
W = USA (1985-1987*)
Y is a letter indicating the last digit of the manufacturing calendar year, where A =1, B = 2, C = 3… J = 0. Exception is letter S, used on all frames prior to 1975.
ZZZZZ is a five or six digit number, apparently representing a sequential frame manufac turing number for the year (or era in the case of pre 1975 frames)
Example 1: KA24587 is the 24,787th frame produced in 1981 for the US market.
Example 2: CG231117 is the 23,117th frame produced in 1977 for the Canadian market.
Example 3: WE54612 is the 54,612th frame produced in 1985 for the US market.
* Serial number format may extend beyond the stated end date but there are no reported examples, to date.
Changed over the years but I think the Continental was their top end touring variant. Didn't get cantis until 84 I think (in Canada).
erial number format XYZZZZZ where:
X is a letter indicating the market using the following codes:
A= Australia
C = Canada (pre-1987*)
E = Europe
K = USA (pre 1985) + non-ferrous frames 1986-1988*)
W = USA (1985-1987*)
Y is a letter indicating the last digit of the manufacturing calendar year, where A =1, B = 2, C = 3… J = 0. Exception is letter S, used on all frames prior to 1975.
ZZZZZ is a five or six digit number, apparently representing a sequential frame manufac turing number for the year (or era in the case of pre 1975 frames)
Example 1: KA24587 is the 24,787th frame produced in 1981 for the US market.
Example 2: CG231117 is the 23,117th frame produced in 1977 for the Canadian market.
Example 3: WE54612 is the 54,612th frame produced in 1985 for the US market.
* Serial number format may extend beyond the stated end date but there are no reported examples, to date.
Likes For flipchip:
#5
Car free since 2018
Join Date: Aug 2017
Location: Vancouver, BC
Posts: 685
Bikes: Mostly japanese ones
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 259 Post(s)
Liked 269 Times
in
134 Posts
Mind you that is the frame manufacture year. I understand if it is produced late enough in the year it could be next year's model.
Features on touring bikes changed over the years, so it wouldn't have features that became more common in the years following.
But yeah, it is a nice bike. I would love to have one myself if I could find one at a reasonable price.
Features on touring bikes changed over the years, so it wouldn't have features that became more common in the years following.
But yeah, it is a nice bike. I would love to have one myself if I could find one at a reasonable price.
Likes For rgvg:
#6
Chipper
Thread Starter
Mind you that is the frame manufacture year. I understand if it is produced late enough in the year it could be next year's model.
Features on touring bikes changed over the years, so it wouldn't have features that became more common in the years following.
But yeah, it is a nice bike. I would love to have one myself if I could find one at a reasonable price.
Features on touring bikes changed over the years, so it wouldn't have features that became more common in the years following.
But yeah, it is a nice bike. I would love to have one myself if I could find one at a reasonable price.
Likes For flipchip:
#7
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,798
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,325 Times
in
837 Posts
In 1974 I set up my wife's bike with 52-42 / 16-18-21-24-32, to give her a bailout gear for our rides in the canyons and hills around west and central Los Angeles. I thought I invented "Megarange" or "Super-Low."
Today, I would inclined to use an ultra-6 speed freewheel, to fill in the gap to the granny gear, maybe 15-17-20-23-26-32.
Today, I would inclined to use an ultra-6 speed freewheel, to fill in the gap to the granny gear, maybe 15-17-20-23-26-32.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
Likes For John E:
#8
Senior Member
Join Date: Aug 2009
Location: Berkeley, CA
Posts: 7,244
Bikes: '72 Cilo Pacer, '72 Gitane Gran Tourisme, '72 Peugeot PX10, '73 Speedwell Ti, '74 Peugeot UE-8, '75 Peugeot PR-10L, '80 Colnago Super, '85 De Rosa Pro, '86 Look Equipe 753, '86 Look KG86, '89 Parkpre Team, '90 Parkpre Team MTB, '90 Merlin
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 834 Post(s)
Liked 2,126 Times
in
555 Posts
You did great for $150! Very handsome and nicely equipped machine. You can always stick a second bottle in a pannier or handlebar bag if you don’t want to obstruct/damage seat tube decals.
__________________
-Randy
'72 Cilo Pacer • '72 Peugeot PX10 • '73 Speedwell Ti • '74 Nishiki Competition • '74 Peugeot UE-8 • '86 Look Equipe 753 • '86 Look KG86 • '89 Parkpre Team Road • '90 Parkpre Team MTB • '90 Merlin Ti
Avatar photo courtesy of jeffveloart.com, contact: contact: jeffnil8 (at) gmail.com.
-Randy
'72 Cilo Pacer • '72 Peugeot PX10 • '73 Speedwell Ti • '74 Nishiki Competition • '74 Peugeot UE-8 • '86 Look Equipe 753 • '86 Look KG86 • '89 Parkpre Team Road • '90 Parkpre Team MTB • '90 Merlin Ti
Avatar photo courtesy of jeffveloart.com, contact: contact: jeffnil8 (at) gmail.com.
Likes For gaucho777:
#9
Senior Member
Join Date: Oct 2020
Location: Phoenix, AZ
Posts: 909
Bikes: 1964(?) Frejus Tour de France, 1967(?) Dawes Double Blue, 1979 Trek 710, 1982 Claud Butler Dalesman, 1983 Schwinn Paramount Elite, 2014 Brompton, maybe a couple more
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 310 Post(s)
Liked 678 Times
in
330 Posts
My Nishikis from a couple years earlier have none - in the 70s we mostly used clamps. I have several decent mid-range touring bikes from the early 80s that only have one set. I think two sets of bottle bosses is more like a 90s or even 2000s thing.
Very nice looking bike, by the way.
Very nice looking bike, by the way.
#10
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
Very nice looking bike, by the way.
#11
Senior Member
Join Date: Oct 2020
Location: Phoenix, AZ
Posts: 909
Bikes: 1964(?) Frejus Tour de France, 1967(?) Dawes Double Blue, 1979 Trek 710, 1982 Claud Butler Dalesman, 1983 Schwinn Paramount Elite, 2014 Brompton, maybe a couple more
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 310 Post(s)
Liked 678 Times
in
330 Posts
Interesting. My Claud Butler Dalesman, Trek 620, and Nishiki International (all from 1982) have one. My 60s and 70s bikes have none. I think the earliest bike I have with two is the 89 Paramount.
In the 80s it seems like it might be more of a high end thing rather than a touring thing. The Paramount is definitely not a tourer.
In the 80s it seems like it might be more of a high end thing rather than a touring thing. The Paramount is definitely not a tourer.
#12
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
As for the OP's bike, my absolutely untrained eye on that geometry tells me it's more of a "sport touring" frame than a full-on tourer. But the fenders may create a bit of trompe l'oeil
#13
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,041
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4511 Post(s)
Liked 6,378 Times
in
3,667 Posts
I just picked up what I thought was a 70s Nishiki Continental Touring bike, but now I'm having doubts. I can't find any reference to the Continental prior to 1983, and for a tourer its a pretty bizarre setup.
Only one set of bottle bosses, one set of rack eyelets front and rear, narrowish wheelbase, 700c wheels, and its very, very light, around 22lbs with the rack. The sticker says the frame is double butted cromo, but doesn't specify beyond that. Afaik its all original aside from the extra sprocket. Was the continental originally a high-end road bike?
Only one set of bottle bosses, one set of rack eyelets front and rear, narrowish wheelbase, 700c wheels, and its very, very light, around 22lbs with the rack. The sticker says the frame is double butted cromo, but doesn't specify beyond that. Afaik its all original aside from the extra sprocket. Was the continental originally a high-end road bike?
Here is the solution you seek.
These have been in use for years, very well made, look great to me and match many other single stainless cages., also a bargain IMO.
https://www.ebay.com/itm/20049692764...AAAOSwtM1ZzTsW