Wanted: Williams C1000 Crank
#1
Standard Member
Thread Starter
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,272
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1297 Post(s)
Liked 940 Times
in
490 Posts
Wanted: Williams C1000 Crank
...Or C34. With or without a chain-ring. 88 b.c.d. I think the arm-length is a standard 6.5".
__________________
Unless you climb the rungs strategically, you’re not going to build the muscle you need to stay at the top.
Unless you climb the rungs strategically, you’re not going to build the muscle you need to stay at the top.
#2
Senior Member
Join Date: Feb 2020
Posts: 2,820
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Likes: 0
Liked 1,328 Times
in
784 Posts
I have a crank that looks like a C1000, I think it's a Nicklin.
pm me if that will do, will be cheap (shipping will likely be more than the crankset), and I have at least one ring (but not at the workshop until next month so cannot check).
p.s. Sheldon says 3.5" BCD, which is 88.9mm.
pm me if that will do, will be cheap (shipping will likely be more than the crankset), and I have at least one ring (but not at the workshop until next month so cannot check).
p.s. Sheldon says 3.5" BCD, which is 88.9mm.
Last edited by oneclick; 03-17-24 at 03:35 PM.