Thorn Nomad / Sherpa users
#1
Banned.
Thread Starter
Thorn Nomad / Sherpa users
Input welcomed on either of these two bikes from those who own or have used them. I think I'd entertain owning one of the newer ones (<10 years old). They look nice and stable, sturdy and strong. Should be able to just barely handle Winnipeg roads. Not much presence of the brand in Canada and even less on the used market here.
#2
Junior Member
Join Date: Nov 2023
Location: Wessex UK
Posts: 107
Bikes: Vintage Raleigh and more modern Roberts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 55 Post(s)
Liked 151 Times
in
57 Posts
I do not have either of the models you list I have a Sterling but have watched plenty of videos and read many blogs from people who own them and have gone to the far ends of the earth on them and get the impression they are about the toughest expedition bikes out there, there is a forum if you are not already aware.
https://thorncyclesforum.co.uk/index.php
https://thorncyclesforum.co.uk/index.php
#3
Full Member
Join Date: Jul 2016
Location: Weston-super-Mare, Somerset, UK
Posts: 433
Bikes: Gitane Course, Paris Sport, Peugeot AO8, Peugeot Bretagne, Peugeot Premiere 85, Peugeot Premiere 86, Peugeot ANC Halfords Team Replica, Peugeot Festina Team Replica, Motobecane Grand Sport, Motobecane Super 15, Raleigh Pro Race, Raleigh Stratos, BSA
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 117 Post(s)
Liked 427 Times
in
90 Posts
I don't know about the Sherpa or Nomad, but I've seen plenty of Thorn Audaxes and a few Club Tourers on Audax rides here in the UK. They look nice with a good finish and owners I've spoken to have always been very happy with them.
#4
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,334
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3901 Post(s)
Liked 4,844 Times
in
2,233 Posts
If Thorn is hard to find and you might consider new try Co-Motion.
Here is their 'toughest' single bike.
Pangea - Co-Motion Cycles
Used rigid mountain bikes are considered tough and also inexpensive. You must have seen the mtb conversion thread in C&V.
Here is their 'toughest' single bike.
Pangea - Co-Motion Cycles
Used rigid mountain bikes are considered tough and also inexpensive. You must have seen the mtb conversion thread in C&V.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Likes For Wildwood:
#5
Fxxxxr
Join Date: Jan 2017
Location: falfurrias texas
Posts: 1,005
Bikes: wabi classic (stolen & recovered)
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 2672 Post(s)
Liked 1,151 Times
in
872 Posts
If Thorn is hard to find and you might consider new try Co-Motion.
Here is their 'toughest' single bike.
Pangea - Co-Motion Cycles
Used rigid mountain bikes are considered tough and also inexpensive. You must have seen the mtb conversion thread in C&V.
Here is their 'toughest' single bike.
Pangea - Co-Motion Cycles
Used rigid mountain bikes are considered tough and also inexpensive. You must have seen the mtb conversion thread in C&V.
__________________
Nothing is true---everything is permitted
Nothing is true---everything is permitted
#6
Banned.
Thread Starter
Hello - thanks for the input and suggestions in this thread. I usually (and currently) ride non-suspension steel framed mountain bikes due to their availability and price. I've also snapped three of those type of frames in the last 10 years, unfortunately. Never seen a Co-Motion in these parts before. Too bad they use disc brakes.
I had thought of joining the Thorn thread but I just assumed they're all biased about their bikes which they spent considerable $$$ on. I'd be using a Thorn around town to haul (I don't have a car anymore) and maybe travel in the future. I also have a Diamondback Ascent that is awaiting paint. It has some nice stiff relatively short chain/seatstays which would be ideal for attaching a trailer to. I almost always ride with an oversized milkcrate on my bikes (including the current ride). They're just so handy and tough! The Diamondbacks' short rear section wouldn't be suitable for the large milkcrate however.
It is tedious "making do" all the time though and I figured why not buy a really long term bike which fits and has known durability, thus the interest in a Thorn. I'm keeping an eye out on the used market.
I had thought of joining the Thorn thread but I just assumed they're all biased about their bikes which they spent considerable $$$ on. I'd be using a Thorn around town to haul (I don't have a car anymore) and maybe travel in the future. I also have a Diamondback Ascent that is awaiting paint. It has some nice stiff relatively short chain/seatstays which would be ideal for attaching a trailer to. I almost always ride with an oversized milkcrate on my bikes (including the current ride). They're just so handy and tough! The Diamondbacks' short rear section wouldn't be suitable for the large milkcrate however.
It is tedious "making do" all the time though and I figured why not buy a really long term bike which fits and has known durability, thus the interest in a Thorn. I'm keeping an eye out on the used market.
#7
Senior Member
Join Date: Feb 2007
Posts: 1,443
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 626 Post(s)
Likes: 0
Liked 401 Times
in
277 Posts
Co-Motion bikes are made to order. You can order whatever model with the type of brake mounts you desire. The Thorn Nomad and Sherpa are strong frames. I have a Co-Motion Pangea Rohloff. I purchased it near 10 years ago and have had no trouble with the Rohloff. If you order a Co-Motion make sure the shop you go through has an experienced fitter and they will have it built like you want.
#8
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,617
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10970 Post(s)
Liked 7,497 Times
in
4,193 Posts
Input welcomed on either of these two bikes from those who own or have used them. I think I'd entertain owning one of the newer ones (<10 years old). They look nice and stable, sturdy and strong. Should be able to just barely handle Winnipeg roads. Not much presence of the brand in Canada and even less on the used market here.
You have done this for years in related but slightly different ways and this thread is no different.
#9
Banned.
Thread Starter
Co-Motion bikes are made to order. You can order whatever model with the type of brake mounts you desire. The Thorn Nomad and Sherpa are strong frames. I have a Co-Motion Pangea Rohloff. I purchased it near 10 years ago and have had no trouble with the Rohloff. If you order a Co-Motion make sure the shop you go through has an experienced fitter and they will have it built like you want.
#10
Banned.
Thread Starter
#11
Senior Member
Join Date: Apr 2010
Location: Elevation 666m Edmonton Canada
Posts: 2,484
Bikes: 2013 Custom SA5w / Rohloff Tourster
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1237 Post(s)
Liked 324 Times
in
249 Posts
In flatlandia there, you could get a Brooklyn Driggs 3 speed which has a double top tube. Let's see you try break that. Their large size will fit up to 6'2" easily.
Unbreakable = do NOT use deFAILeurs. With Pinion, you could use all 2.3/ 2.0 spokes. My first SA XL-FDD has 32,000 miles with ZERO worries, has 2.3 mm spokes.
For unbreakable frame you can wrap it with 2 or 3 layers of CF. No need to strip the paint.
My first try with CF I wrapped a broke fork and let it set for 2 days. Put it on a cement floor and WHACKED it with a hammer. The floor shook and nothing deformed on the fork. LOL.
My seat tube and BB area were done on my Rohloff14 tour bike. The bike is 120 lbs loaded. I'll go 43 mph with NO fear. Bonus is 0% of your crank power is wasted on a noodle frame.
I ride it at 73 lbs on 90 to 130 mile rides on freeways. Goes as fast as the wind lets me. The 2nd last day of my tour that was 27 to 33 mph on the way to Red Deer.
Unbreakable = do NOT use deFAILeurs. With Pinion, you could use all 2.3/ 2.0 spokes. My first SA XL-FDD has 32,000 miles with ZERO worries, has 2.3 mm spokes.
For unbreakable frame you can wrap it with 2 or 3 layers of CF. No need to strip the paint.
My first try with CF I wrapped a broke fork and let it set for 2 days. Put it on a cement floor and WHACKED it with a hammer. The floor shook and nothing deformed on the fork. LOL.
My seat tube and BB area were done on my Rohloff14 tour bike. The bike is 120 lbs loaded. I'll go 43 mph with NO fear. Bonus is 0% of your crank power is wasted on a noodle frame.
I ride it at 73 lbs on 90 to 130 mile rides on freeways. Goes as fast as the wind lets me. The 2nd last day of my tour that was 27 to 33 mph on the way to Red Deer.
#12
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,617
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10970 Post(s)
Liked 7,497 Times
in
4,193 Posts
Yes! Yes! Love it every time it is posted. More! More! Encore!