Sugru
#1
Senior Member
Thread Starter
Join Date: Jun 2011
Location: MD
Posts: 283
Bikes: Yes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sugru
Has anyone used this stuff? FIX THAT THING. - the future needs fixing - sugru
I have a Ridley frame thats missing a rubber cover on the bottom bracket shell and based on research getting it is going to be a huge hassle. Sugru seems like it would be viable solution
I have a Ridley frame thats missing a rubber cover on the bottom bracket shell and based on research getting it is going to be a huge hassle. Sugru seems like it would be viable solution
#3
Senior Member
Thread Starter
Join Date: Jun 2011
Location: MD
Posts: 283
Bikes: Yes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Don't think I am gonna have much success with electrical tape covering a 17x20mm opening and staying put
#4
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,304
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1447 Post(s)
Liked 727 Times
in
372 Posts
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
#5
Senior Member
Join Date: Oct 2009
Location: London
Posts: 303
Bikes: Pacific-Reach SL
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Unfortunately ducktape wouldn't work for a bottom bracket fix.. sugru is 3D glue, so to answer OP's question, yes you could build a bottom bracket cover with sugru, since sugru is rubber!
I recommend you check out Tips and Tricks - the future needs fixing - sugru on how best to apply sugru!
My folding bike is full of sugru, stops scratches and cable rub, chainstay protector etc, and if you have some sugru left, fill out a couple of allen bolts (seat, handlebars are most common) to make it that bit harder for thieves to steal! (takes an extra minute to remove)
Post a picture once you do!
I recommend you check out Tips and Tricks - the future needs fixing - sugru on how best to apply sugru!
My folding bike is full of sugru, stops scratches and cable rub, chainstay protector etc, and if you have some sugru left, fill out a couple of allen bolts (seat, handlebars are most common) to make it that bit harder for thieves to steal! (takes an extra minute to remove)
Post a picture once you do!
#6
Senior Member
Join Date: Jun 2004
Location: Northern Nevada
Posts: 3,811
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Somebody gave me a sample pack of sugru for Christmas, and I've used it for several low-stress jobs, little feet and replacing pushbuttons and reinforcing computer cables. Works great for that.
I don't think I've ever had a bike with a cover on the BB shell--I can't quite visualize what you need to do. But based on my experience, you could form the Sugru into the size and shape you need pretty easily (it may take more than one of the little packets). Clean the shell really well, then stick it on. It has to dry/cure for 24 hours, and unless you're really clever at molding it, you'll have to make a new one whenever you take it off....
Wait! I just googled BB shell cover, and now I'm wondering if you're talking about the cable guide that bolts to the bottom of the shell. If that's it, I think Sugru may be too soft--the cable would cut through it pretty quickly. On the other hand, I've had bikes where the cable just ran under the shell, no guide at all, and in years of use, it didn't even wear through the paint. Only costs a couple of bucks to try it. Or you could try to find a guide on an old bike at a thrift store and cannibalize it.
I don't think I've ever had a bike with a cover on the BB shell--I can't quite visualize what you need to do. But based on my experience, you could form the Sugru into the size and shape you need pretty easily (it may take more than one of the little packets). Clean the shell really well, then stick it on. It has to dry/cure for 24 hours, and unless you're really clever at molding it, you'll have to make a new one whenever you take it off....
Wait! I just googled BB shell cover, and now I'm wondering if you're talking about the cable guide that bolts to the bottom of the shell. If that's it, I think Sugru may be too soft--the cable would cut through it pretty quickly. On the other hand, I've had bikes where the cable just ran under the shell, no guide at all, and in years of use, it didn't even wear through the paint. Only costs a couple of bucks to try it. Or you could try to find a guide on an old bike at a thrift store and cannibalize it.
Last edited by Velo Dog; 08-22-14 at 10:48 PM.
#8
Senior Member
Thread Starter
Join Date: Jun 2011
Location: MD
Posts: 283
Bikes: Yes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Somebody gave me a sample pack of sugru for Christmas, and I've used it for several low-stress jobs, little feet and replacing pushbuttons and reinforcing computer cables. Works great for that.
I don't think I've ever had a bike with a cover on the BB shell--I can't quite visualize what you need to do. But based on my experience, you could form the Sugru into the size and shape you need pretty easily (it may take more than one of the little packets). Clean the shell really well, then stick it on. It has to dry/cure for 24 hours, and unless you're really clever at molding it, you'll have to make a new one whenever you take it off....
Wait! I just googled BB shell cover, and now I'm wondering if you're talking about the cable guide that bolts to the bottom of the shell. If that's it, I think Sugru may be too soft--the cable would cut through it pretty quickly. On the other hand, I've had bikes where the cable just ran under the shell, no guide at all, and in years of use, it didn't even wear through the paint. Only costs a couple of bucks to try it. Or you could try to find a guide on an old bike at a thrift store and cannibalize it.
I don't think I've ever had a bike with a cover on the BB shell--I can't quite visualize what you need to do. But based on my experience, you could form the Sugru into the size and shape you need pretty easily (it may take more than one of the little packets). Clean the shell really well, then stick it on. It has to dry/cure for 24 hours, and unless you're really clever at molding it, you'll have to make a new one whenever you take it off....
Wait! I just googled BB shell cover, and now I'm wondering if you're talking about the cable guide that bolts to the bottom of the shell. If that's it, I think Sugru may be too soft--the cable would cut through it pretty quickly. On the other hand, I've had bikes where the cable just ran under the shell, no guide at all, and in years of use, it didn't even wear through the paint. Only costs a couple of bucks to try it. Or you could try to find a guide on an old bike at a thrift store and cannibalize it.