Who Still Makes Lugged Steel Frames & Forks?
#51
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,800 Times
in
2,284 Posts
Once bikes started getting vertical dropouts, the hubs could also change, and no longer required the brute force to stay in place. The hubs then started using lightweight components/designs. The vertical dropout is where I draw the line between classic and modern when it comes to lugged steel bikes. Not much else has changed.
1948 Peugeot PH-60
My 1979 Centurion Pro Tour has them as well.
79 Centurion Pro Tour
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#52
Full Member
#53
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
__________________
My Bikes
My Bikes
#54
Full Member
I hadn’t looked at the build thread for years. It was a nice trip down memory lane. Here it is: https://www.bikeforums.net/classic-v...d-edition.html
#55
Senior Member
Join Date: Dec 2005
Posts: 17,158
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,699 Times
in
2,611 Posts
#56
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
Likes For Andy_K:
#57
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
Did you get some error about an uninitialized variable? I’ve seen that a couple of times recently, but it doesn’t happen for me with that link.
__________________
My Bikes
My Bikes
#58
Senior Member
Thread Starter
This option finally registered in my feeble brain - it is possible to bring an existing vintage frame up to date with braze-ons.
You have to re-paint the frame but you can get all the bits and doodads you want (shifter and water bottle bosses, cable ends and guides, rack mounts,...).
This is a half-way new option. I'm not sure of the cost but it does make an old frame more "custom".
You have to re-paint the frame but you can get all the bits and doodads you want (shifter and water bottle bosses, cable ends and guides, rack mounts,...).
This is a half-way new option. I'm not sure of the cost but it does make an old frame more "custom".
Likes For Bad Lag:
#59
Full Member
I've been wanting a Rivendell but lately have been thinking about having a Chapman built. www.chapmancycles.com
Likes For m.c.:
#60
Senior Member
This, bought one this year.
Likes For jnbrown:
#61
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,625
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1668 Post(s)
Liked 1,821 Times
in
1,059 Posts
At the mall (wow, when was the last time?) this evening for the holiday musical performance of a family member and stumbled across a made-in-USA* lugged steel Shinola Runwell.
https://www.shinola.com/mens/men-s-c...l-bicycle.html
A 'net search indicates a kidney transplant will run ~$500,000, so yes, doesn't cost a kidney.
*Waterford
https://www.shinola.com/mens/men-s-c...l-bicycle.html
A 'net search indicates a kidney transplant will run ~$500,000, so yes, doesn't cost a kidney.
*Waterford
Last edited by tcs; 12-20-22 at 03:13 PM.
#62
Senior Member
Thread Starter
I had a lot of fun looking over those MERCIAN cycles.
I suppose they are about as close to a Bob Jackson as one can get these days. It is ironic that a guy, a company, with a good, reliable product cannot make a long-term go of it. It is almost as if artisans need patrons or benefactors to survive.
I suppose they are about as close to a Bob Jackson as one can get these days. It is ironic that a guy, a company, with a good, reliable product cannot make a long-term go of it. It is almost as if artisans need patrons or benefactors to survive.
Likes For Bad Lag:
#63
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,043
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,382 Times
in
3,669 Posts
I've been wanting a Rivendell but lately have been thinking about having a Chapman built. www.chapmancycles.com
Ifn you think you want a Chapman, get to it, the sooner the better.
Likes For merziac:
#64
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
Am I the only one that finds it amazing they still make all those various models, finished in all those outstanding color schemes?
A true KOF, Mercian is the only Brit builder I'd ever add to my collection.
DD
A true KOF, Mercian is the only Brit builder I'd ever add to my collection.
DD
Likes For Drillium Dude:
#65
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,006
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,601 Times
in
1,764 Posts
Two days ago I had the opportunity to visit one of the few Dutch framebuilders, Marten Gerritsen, whose shop goes by the name of 'm-gineering'. He had invited the members of the Dutch Oude Fiets forum for his yearly do: Tubes & Coffee. A casual get-together with bikes and bike enthusiasts. A French Fender Day Kiel-Windeweer style.
M-gineering started out as an engineering firm, and some of the older projects clearly show those roots:
These days it is importing high-end parts and building frames. Marten builds all sorts of bikes, and his aesthetics are all over the place, but he does do classic as well, with lugs and horizontal top tubes :
I rather like this one. Copper-plated frame, built for the 2009 European Hand-built Bicycle Exhibition:
More pictures of his work can be found in the gallery on his website.
There were also French fenders to be seen, BTW. On this Barra, for instance:
And on this wonderful Jo Routens:
M-gineering started out as an engineering firm, and some of the older projects clearly show those roots:
These days it is importing high-end parts and building frames. Marten builds all sorts of bikes, and his aesthetics are all over the place, but he does do classic as well, with lugs and horizontal top tubes :
I rather like this one. Copper-plated frame, built for the 2009 European Hand-built Bicycle Exhibition:
More pictures of his work can be found in the gallery on his website.
There were also French fenders to be seen, BTW. On this Barra, for instance:
And on this wonderful Jo Routens:
Likes For non-fixie:
#66
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,846
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
I've been wanting a Rivendell but lately have been thinking about having a Chapman built. www.chapmancycles.com
me I am more a kirk kinda guy Kirk Frameworks | Custom Bicycles
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#67
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,800 Times
in
2,284 Posts
This option finally registered in my feeble brain - it is possible to bring an existing vintage frame up to date with braze-ons.
You have to re-paint the frame but you can get all the bits and doodads you want (shifter and water bottle bosses, cable ends and guides, rack mounts,...).
This is a half-way new option. I'm not sure of the cost but it does make an old frame more "custom".
You have to re-paint the frame but you can get all the bits and doodads you want (shifter and water bottle bosses, cable ends and guides, rack mounts,...).
This is a half-way new option. I'm not sure of the cost but it does make an old frame more "custom".
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#68
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1955 Post(s)
Liked 3,661 Times
in
1,679 Posts
A full complement of braze-ons on a frame that doesn't have them would be under $200 - at least that would be my budgetary quote for someone interested. Powder coat can be had for under $200. Shipping back and forth if you don't have someone local to do it for you would be under $100. It does add up, so you'd have to get the frame for cheap. I look for ratty ones with good bones.
Likes For 52telecaster:
#69
Live not by lies.
Join Date: Nov 2020
Posts: 1,306
Bikes: BigBox bikes.
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 860 Post(s)
Liked 784 Times
in
582 Posts
At the mall (wow, when was the last time?) this evening for the holiday musical performance of a family member and stumbled across a made-in-USA* lugged steel Shinola Runwell.
https://www.shinola.com/mens/men-s-c...l-bicycle.html
A 'net search indicates a kidney transplant will run ~$500,000, so yes, doesn't cost a kidney.
*Waterford
https://www.shinola.com/mens/men-s-c...l-bicycle.html
A 'net search indicates a kidney transplant will run ~$500,000, so yes, doesn't cost a kidney.
*Waterford
Maybe one stolen from Uigers or Shining Path concentration camp.
Likes For SkinGriz:
#70
framebuilder
Two days ago I had the opportunity to visit one of the few Dutch framebuilders, Marten Gerritsen, whose shop goes by the name of 'm-gineering'. He had invited the members of the Dutch Oude Fiets forum for his yearly do: Tubes & Coffee. A casual get-together with bikes and bike enthusiasts. A French Fender Day Kiel-Windeweer style.
M-gineering started out as an engineering firm, and some of the older projects clearly show those roots:
These days it is importing high-end parts and building frames. Marten builds all sorts of bikes, and his aesthetics are all over the place, but he does do classic as well, with lugs and horizontal top tubes :
M-gineering started out as an engineering firm, and some of the older projects clearly show those roots:
These days it is importing high-end parts and building frames. Marten builds all sorts of bikes, and his aesthetics are all over the place, but he does do classic as well, with lugs and horizontal top tubes :
The bike in the front was painted as a learning project at my shop in Niles Michigan. He spent a week with me after which he attended NAHBS. The main color is a gray silver pearl and the panels a candy red.
He has a Johnny Berry made-in-Manchester frame. In 1975, I took a lot of Johnny’s frame making tools home after he passed away. I and my students use some of them to this very day.
#71
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,054
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,804 Times
in
1,408 Posts
Cinelli has been making the lugged Super Corsa for 72 years now.
#72
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,790
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3511 Post(s)
Liked 2,926 Times
in
1,775 Posts