Eggbeater rebuild question
#1
Member
Thread Starter
Join Date: Oct 2005
Posts: 34
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Eggbeater rebuild question
I have one of the first generations of eggbeaters (with the rubber end caps). Can I use a rebuild kit for the 2003 and newer versions? They have the aluminum end cap, which I don't need to use, but are the rest of the parts compatible?
Thank you.
Chris
Thank you.
Chris
#3
Senior Member
Join Date: Dec 2005
Location: Boulder, Colorado
Posts: 1,383
Bikes: Cinelli Supercoursa 69, Ritchey Breakaway Cross, Mondonico Diamond Extra 05, Coors Light Greg Lemond (built by Scapin) 88, Scapin MTB, Stumpjumper 83, Specialized Stumpjumper M4, Lemond Poprad 2001
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Liked 2 Times
in
1 Post
Go on line and ask. I just rebuilt a set of candy pedals and it was easy. You may need to pry out the endcap. Crank bros are good about answering queries.
#4
Senior Member
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times
in
222 Posts
Only CBs not rebuildable that I know of are the Smartys.
#5
Junior Member
Join Date: Jun 2007
Location: Bartlett, TN
Posts: 7
Bikes: Trek EX8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have the SL's with the screw-in end cap and just rebuilt them. You might be able to use the bushing and bearing from the post-02 kit, but the 02 EB's with the rubber endcap have an allen-head screw in the end of the spindle, where the later pedals have threads on the end of the spindle for a locknut. As long as you can reuse your allen screw, you should be good.
Here's a video showing the 02 rebuild with the setscrew: https://www.crankbrothers.com/support..._eggbeater.php
Here's a video showing the 02 rebuild with the setscrew: https://www.crankbrothers.com/support..._eggbeater.php