Need a 4spd vintage cassette. Any ideas??
#1
Midlifecyclist
Thread Starter
Need a 4spd vintage cassette. Any ideas??
Recently rescued a 1973 Motoconfort from the bin, and the original cassette is absolutely toast.
I’ve looked everywhere I can think of. Any ideas where to source one??
I’ve looked everywhere I can think of. Any ideas where to source one??
#3
Senior Member
Join Date: Dec 2005
Posts: 17,169
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3814 Post(s)
Liked 6,732 Times
in
2,619 Posts
Use a 5-speed freewheel with one cog removed?
#4
Tinker-er
Join Date: Oct 2007
Location: Mid-Atlantic
Posts: 456
Bikes: 1956 Rudge Sports; 1983 Univega Alpina Uno; 1981 Miyata 610; 1973 Raleigh Twenty; 1994 Breezer Lightning XTR; V4 Yuba Mundo aka "The Schlepper"; 1987 Raleigh "The Edge" Mountain Trials; 1952 R.O. Harrison "Madison"
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 168 Post(s)
Liked 269 Times
in
184 Posts
Many 4 speed freewheels available out there.
Likes For PhilFo:
#5
Senior Member
Join Date: Aug 2020
Location: Saratoga, CA
Posts: 833
Bikes: 1981 Bianchi Specialissima, 1971 Bob Jackson. 2012 Kestrel 4000. 2012 Willier. 2016 Fuji Cross 1.1, 1950 Hetchins, 194X James Fothergill, 1971 Paramount P15, 1973 Paramount P12, 1963 Legnano
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 281 Post(s)
Liked 962 Times
in
394 Posts
Check ebayuk. There's a much better and cheaper assortment than EBAY US.
#6
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,849
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,056 Times
in
1,256 Posts
I'd be surprised if a '73 anything had a 4 speed freewheel. Pics of the bike?
#7
blahblahblah chrome moly
Join Date: Apr 2009
Location: Seattle
Posts: 1,998
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1182 Post(s)
Liked 2,579 Times
in
1,079 Posts
On the 5-sp freewheels where the high gear cog threads into/onto the next larger cog, instead of onto the FW body, you can just leave the top gear cog off. Regina is the one I've done this with but I bet an Atom is about the same way if you need a French thread. I have a couple and can take a cog off to confirm if needed.
On the Regina I did that to, I ground down the "new" top gear on the belt sander to remove the projection that the old top gear threaded onto. Not strictly necessary but it looks more "right". If you do it neatly, it looks like it was made to be a top gear position. Sand out the belt-sander scratches with some fine sandpaper taped to a flat surface, just rubbing the cog against the paper by hand.
I suppose it'll rust where I ground off the factory coating, whatever that is (if any?) but I keep my freewheels coated in a nice layer of grime, which is effective at rust prevention. This was not an "Oro" FW, it's a GS Corse, so I think they may come with no coating at all, i.e. I didn't change the susceptibility to rust at all.
All that work is unnecessary of course if you just find a 4-sp FW, they're out there. But in my case, making my own was faster than waiting for something to arrive in the mail.
On the Regina I did that to, I ground down the "new" top gear on the belt sander to remove the projection that the old top gear threaded onto. Not strictly necessary but it looks more "right". If you do it neatly, it looks like it was made to be a top gear position. Sand out the belt-sander scratches with some fine sandpaper taped to a flat surface, just rubbing the cog against the paper by hand.
I suppose it'll rust where I ground off the factory coating, whatever that is (if any?) but I keep my freewheels coated in a nice layer of grime, which is effective at rust prevention. This was not an "Oro" FW, it's a GS Corse, so I think they may come with no coating at all, i.e. I didn't change the susceptibility to rust at all.
All that work is unnecessary of course if you just find a 4-sp FW, they're out there. But in my case, making my own was faster than waiting for something to arrive in the mail.
#8
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,922
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1803 Post(s)
Liked 2,336 Times
in
1,379 Posts
Recently, there was someone in Wisconsin who had a listing on FB with a couple of NOS 4 speed freewheels. IIRC they were in the $30-35 bracket. I will see if I can find her listings again.
#9
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,017
Bikes: Yes, please.
Mentioned: 282 Post(s)
Tagged: 0 Thread(s)
Quoted: 2200 Post(s)
Liked 4,634 Times
in
1,774 Posts
What is wrong with it? I've encountered quite a few of those old freewheels, and more often than not I've been able to bring their mechanisms back to life with a liberal dose of WD40, sewing machine oil and some TLC. Worn cogs can be replaced, or even filed back into a usable shape.
#10
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,875
Bikes: Too many to list here check my signature.
Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2938 Post(s)
Liked 2,941 Times
in
1,500 Posts
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#11
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,807
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1394 Post(s)
Liked 1,335 Times
in
841 Posts
The 1960 Schwinn Varsity had flat-bladed forks and a 15-18-21-25 four-speed freewheel, while the Continental had tubular forks and a 15-17-19-22-25 five-speed freewheel.
By the next year, the Varsity was a 10-speed, as well.
For a number of years, Regina and a few others made only 4-speed bodies, and the optional 5th cog was screwed directly into the 4th, as mentioned above.
By the next year, the Varsity was a 10-speed, as well.
For a number of years, Regina and a few others made only 4-speed bodies, and the optional 5th cog was screwed directly into the 4th, as mentioned above.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#12
Midlifecyclist
Thread Starter
#13
Midlifecyclist
Thread Starter
#14
Senior Member
I suppose it'll rust where I ground off the factory coating, whatever that is (if any?) but I keep my freewheels coated in a nice layer of grime, which is effective at rust prevention. This was not an "Oro" FW, it's a GS Corse, so I think they may come with no coating at all, i.e. I didn't change the susceptibility to rust at all.
the mail.
the mail.
Likes For Mr. Spadoni:
#15
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,922
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1803 Post(s)
Liked 2,336 Times
in
1,379 Posts
I rechecked FB but either they sold or were withdraw.