How to remove axles from modern Hubsmith hubs
01-10-22, 04:19 PM
#1
Junior Member
Thread Starter
How to remove axles from modern Hubsmith hubs
I have purchased a pair of SMC 16" 305 Carbon Rims & Wheels having 74mm OLD hubsmith hubs and need to replace the original axles with longer axles for a custom build project.
I have attempted to upload a jpg image but keep getting an alert something about all files inline. After a few attempts at resizing (down) the images has failed, I gave up.
I am a total nube regarding modern hubs and don't want to make any foolish mistakes in an uneducated attempt at removing the axles.
Any advice, perhaps recommended YouTube videos, is greatly appreciated.
Thanks in advance.
SD
I have attempted to upload a jpg image but keep getting an alert something about all files inline. After a few attempts at resizing (down) the images has failed, I gave up.
I am a total nube regarding modern hubs and don't want to make any foolish mistakes in an uneducated attempt at removing the axles.
Any advice, perhaps recommended YouTube videos, is greatly appreciated.
Thanks in advance.
SD
01-10-22, 04:42 PM
#2
Senior Member
Join Date: Feb 2012
Location: Henrico, VA
Posts: 1,480
Bikes: Origami Gazelle, Origami Crane 8, Origami Cricket 7
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 452 Post(s)
Liked 405 Times
in
241 Posts
email the photo to me and I will upload it to this tread for you . Paul@OrigamiBicycles.com
__________________
Paul Pinigis
Owner of Origami Bicycle Company
Paul Pinigis
Owner of Origami Bicycle Company
Likes For Pinigis:
01-10-22, 07:20 PM
#3
Junior Member
Thread Starter
email the photo to me and I will upload it to this tread for you . Paul@OrigamiBicycles.com
SD
01-10-22, 07:26 PM
#4
Junior Member
Thread Starter
email the photo to me and I will upload it to this tread for you . Paul@OrigamiBicycles.com
It's on the way.
01-10-22, 07:33 PM
#5
Senior Member
Join Date: Feb 2012
Location: Henrico, VA
Posts: 1,480
Bikes: Origami Gazelle, Origami Crane 8, Origami Cricket 7
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 452 Post(s)
Liked 405 Times
in
241 Posts
I have purchased a pair of SMC 16" 305 Carbon Rims & Wheels having 74mm OLD hubsmith hubs and need to replace the original axles with longer axles for a custom build project.
I have attempted to upload a jpg image but keep getting an alert something about all files inline. After a few attempts at resizing (down) the images has failed, I gave up.
I am a total nube regarding modern hubs and don't want to make any foolish mistakes in an uneducated attempt at removing the axles.
Any advice, perhaps recommended YouTube videos, is greatly appreciated.
Thanks in advance.
SD
I have attempted to upload a jpg image but keep getting an alert something about all files inline. After a few attempts at resizing (down) the images has failed, I gave up.
I am a total nube regarding modern hubs and don't want to make any foolish mistakes in an uneducated attempt at removing the axles.
Any advice, perhaps recommended YouTube videos, is greatly appreciated.
Thanks in advance.
SD
__________________
Paul Pinigis
Owner of Origami Bicycle Company
Paul Pinigis
Owner of Origami Bicycle Company
Likes For Pinigis:
Likes For saucerdesigner:
