100 test miles on '73 Paramount P13v2 repair so far....
#1
Junior Member
Thread Starter
100 test miles on '73 Paramount P13v2 repair so far....
Nine days ago I repaired the frame on this Paramount which had it's seat-tube broke off at the bottom bracket. Shortened seat-tube 5/8" and shaped it to fit back into BB, shortened head-tube and steer tube to match, then welded/brazed it all back together. Two days later after parts scrounging I was riding it as a single-speed, then a few days further on it got derailleurs and a Campy shifter and cable-guide to make it fully functional. Now it has done a hundred miles over rough streets, smooth streets and up a number of grades up to 8% with a 200+ pound rider and it's repairs seem fine. Previous local owner had stripped it bare for parts and had some of them on ebay for sale, I talked them into selling me the fork and they threw the frame in for another $25. Put on the road with mostly Shimano parts out of the junk-box, will phase Campy parts in as I trip over them in the future including a set of Record hubs I picked up at a local estate sale earlier this year. Lots of fun to ride, and who knows someday it may get back into some sort of race.
Likes For 88ss:
#2
Senior Member
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,541
Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 935 Post(s)
Liked 1,327 Times
in
492 Posts
I'm no expert, but that steerer tube repair looks scary as heck to me. Wondering why you didn't just cut the top off and extend the threads.
#3
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,831 Times
in
1,997 Posts
I don’t know what to say.
maybe clever way to save the headlug chrome
hopefully the seat and head tube were parallel
i guess one could call it chopped and channeled
maybe clever way to save the headlug chrome
hopefully the seat and head tube were parallel
i guess one could call it chopped and channeled
#4
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,752
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 109 Post(s)
Tagged: 0 Thread(s)
Quoted: 939 Post(s)
Liked 2,969 Times
in
985 Posts
Gobsmacked. Either madness or genius!
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
#5
Garage tetris expert
Join Date: May 2016
Location: Texas Hill Country
Posts: 897
Bikes: A few. Ok, a lot
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 388 Post(s)
Liked 695 Times
in
331 Posts
Not only that, but it was a squandered opportunity to eliminate that pesky slotted portion of the threads, as well as reduce the threaded section to the bare minimum needed for the headset upper.
#6
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,091
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4520 Post(s)
Liked 6,407 Times
in
3,686 Posts
This gives "frame fitting" a whole new meaning.
Likes For merziac:
#7
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 2,752
Bikes: '79 Trek 938, '86 Jim Merz Allez SE, '90 Miyata 1000, '68 PX-10, '80 PXN-10, '73 Super Course, '87 Guerciotti, '83 Trek 600, '80 Huffy Le Grande
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 1233 Post(s)
Liked 3,576 Times
in
1,420 Posts
I like it!
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
#8
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,091
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4520 Post(s)
Liked 6,407 Times
in
3,686 Posts
Where's @scarlson when we need him.
#9
Senior Member
Join Date: Dec 2005
Posts: 17,167
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3814 Post(s)
Liked 6,730 Times
in
2,618 Posts
Where's @scarlson when we need him.
Likes For nlerner:
#10
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,091
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4520 Post(s)
Liked 6,407 Times
in
3,686 Posts
Likes For merziac:
#11
Senior Member
Join Date: May 2019
Location: Burien WA
Posts: 513
Bikes: Cannondale Synapse, LeMond Victoire, Bianchi Campione d'Italia, Kona Hei Hei, Ritchey Ultra, Schwinn "Paramount" PDG, '83 Trek 640
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 268 Post(s)
Liked 326 Times
in
212 Posts
Please tell us that you welded an insert inside of the steerer tube and didn't show that step. The idea that you welded the steerer tube back together end-to-end does not seem structurally sound to me.
I love the creativity, but that particular junction scares me. I wouldn't ride it.
I love the creativity, but that particular junction scares me. I wouldn't ride it.
Likes For mhespenheide:
#12
Junior Member
Thread Starter
What I like about this bike is it's history. It was sold new at Pete's Cycle in Maryland, a famous motor/bicycle shop. I talked to them and they quit selling bicycles in the 1990s. Another interesting bit of history is that the 1973 Paramount P13 version 2, may be the first, or one of the first USA mass-produced bikes to have 700c wheels when new, and I am very glad it has them, the brake mounts are an inch closer to the axle centers than on bikes that came with 27" wheels. It is nice to have a purpose-made racing bike. A friend of mine who has a P-13 they bought new in the 70s donated the Paramount head-badge and Campy shifters and cable guide from his stash, thank-you very much. I heard that production was at an all-time high for Paramount bikes in the early 70s, so maybe the quality suffered a little and it is why this bike broke??? This bike was $450 back in '73. I have had other ten-speed Schwinn bikes from this era and this bike is about ten pounds lighter than many of them give or take. I had this sitting in the basement since spring, but I had the torches out to work on the exhaust on my wife's automobile so dug it out and finally got it fixed. thank-you for your interest.
Likes For 88ss:
#13
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 2,752
Bikes: '79 Trek 938, '86 Jim Merz Allez SE, '90 Miyata 1000, '68 PX-10, '80 PXN-10, '73 Super Course, '87 Guerciotti, '83 Trek 600, '80 Huffy Le Grande
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 1233 Post(s)
Liked 3,576 Times
in
1,420 Posts
Anecdotal, but can confirm. Mine (a '72) broke at the chainstay/dropout joint, likely from not having enough braze filler. Only one side is cracked. What a junker!
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
Likes For AdventureManCO:
#14
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,671
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1033 Post(s)
Liked 2,549 Times
in
1,066 Posts
I had a fork steerer extended by cutting the steerer, inserting a plug, and brazing to desired length. Worked fine. (Okay, it's the same fork that tried to kill me a couple months ago, but that was a blade near the dropout, not the steerer, which was an remains solid as a rock: If that was the technique used here, I'd say it should be fine. But if it is just the two ends of the cut tube joined together, let's just say you are a braver man than I for riding it. Breaking a steerer at speed can lead to bad results a la George Hincapie at Paris-Roubaix.
I'm more curious about some of the other joints. The OP used the term "welded/brazed"; I sure hope all those joints were brazed and none of them were welded.
I'm more curious about some of the other joints. The OP used the term "welded/brazed"; I sure hope all those joints were brazed and none of them were welded.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
Likes For bikingshearer:
#15
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,854
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 2342 Post(s)
Liked 2,841 Times
in
1,548 Posts
the modification were covered in frame builders. most seem ok, but had not seen similar. my take on the welding was done to the fork steerer, but could be very wrong https://www.bikeforums.net/framebuil...rame-work.html
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#16
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,831 Times
in
1,997 Posts
I had a fork steerer extended by cutting the steerer, inserting a plug, and brazing to desired length. Worked fine. (Okay, it's the same fork that tried to kill me a couple months ago, but that was a blade near the dropout, not the steerer, which was an remains solid as a rock: If that was the technique used here, I'd say it should be fine. But if it is just the two ends of the cut tube joined together, let's just say you are a braver man than I for riding it. Breaking a steerer at speed can lead to bad results a la George Hincapie at Paris-Roubaix.
I'm more curious about some of the other joints. The OP used the term "welded/brazed"; I sure hope all those joints were brazed and none of them were welded.
I'm more curious about some of the other joints. The OP used the term "welded/brazed"; I sure hope all those joints were brazed and none of them were welded.
#17
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,888
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1457 Post(s)
Liked 2,197 Times
in
963 Posts
Welcome to C&V and posting how you rescued your Paramount from the scrap heap. Kudos for your fine frame work in order to give it a second life!
I grew up in Joppa, just a few miles from Pete's Cycle in Bel Air. I rode my bike there often and admired the Schwinns, Hondas, and Yamahas. This was in the late '60s until the mid-70s when I left for college. I bought many spare parts, tools, and my first leather saddle at Pete's.
Can you post a picture of the Pete's Cycle shop decal/sticker on your P13? It would bring back fond memories.
Are you saying that in 1973 the P13 could be ordered with either tubular wheels or 700c clinchers? If so, I've never seen this specification as a possibility. Maybe I've missed this detail somewhere along the way in the past two decades since I immersed myself in Paramount culture (I currently own a '71 P13 and an '83 Waterford Standard. I've also restored a '66 P13). I'd be interested in reading more about this.
Also, I don't believe it was ever accurate to describe Paramounts as "mass-produced." Each frameset was individually built and only by a limited number of people. Even when they had to contract out frames, i.e. Don Mainland, the work was only done by one individual, one frameset at a time. If you haven't read the history of Paramount frames at Waterford, it is worth the read.
Can you post a picture of the Pete's Cycle shop decal/sticker on your P13? It would bring back fond memories.
Also, I don't believe it was ever accurate to describe Paramounts as "mass-produced." Each frameset was individually built and only by a limited number of people. Even when they had to contract out frames, i.e. Don Mainland, the work was only done by one individual, one frameset at a time. If you haven't read the history of Paramount frames at Waterford, it is worth the read.
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Likes For pastorbobnlnh:
#18
Junior Member
Thread Starter
I know zero about Paramounts, this is the only one I have ever had. All I can do is the same as anyone else in my shoes, get info from the internet from web sites like the Kurt Kaminer one which has a nice article on the different versions of Paramounts. The P13 version-2 apparently popped up in 1971 as a pure racer with the 700 size wheels, no eyelets on the dropouts for luggage racks, no brazed on cable stops on the top tube, new for '72 is a different fork allegedly for handling improvement. I am just glad the bike was made for the newer wheel size because there is vastly more choices in tires than for 27" bikes.
This bike seems to have quick steering, it is not squirrely though as a few times I have taken it down steep hills at over 30mph and even did some slaloming during the descent to see how it behaved and there is nothing scary about it despite it's tall frame size, it is rock solid. It's ride is more stiff than a Columbus tubed bike, I would not look for one of these for it's comfort over rough roads. A pair of Conti gp5000s would help for sure. I am glad to have it over one of the earlier Paramounts just for it's modern features, and it is also one of the real old Paramounts from the 70s, and I am a fan of 70s and older things because that is when I was young and it is a nostalgia thing for me.
This bike seems to have quick steering, it is not squirrely though as a few times I have taken it down steep hills at over 30mph and even did some slaloming during the descent to see how it behaved and there is nothing scary about it despite it's tall frame size, it is rock solid. It's ride is more stiff than a Columbus tubed bike, I would not look for one of these for it's comfort over rough roads. A pair of Conti gp5000s would help for sure. I am glad to have it over one of the earlier Paramounts just for it's modern features, and it is also one of the real old Paramounts from the 70s, and I am a fan of 70s and older things because that is when I was young and it is a nostalgia thing for me.
Likes For 88ss:
Likes For 88ss:
#20
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,888
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1457 Post(s)
Liked 2,197 Times
in
963 Posts
88ss thanks for making the clarification about the 700c sized wheels and that you found the information on the Head Badge.
Kurt is a friend (also to many here on C&V) and a prolific poster since 2005. His username is cudak888 and his Paramount Registry is a valuable asset to all Paramount owners.
To clarify, the change in P13 versions, to which he refers, and you noted, was not for 700c clincher or wired on wheels, but specifically refers to tubular wheelsets.
Prior to 1971, all models of Paramount men's road bike shared the same geometry, build features, forks, and tubing lengths for specific frame sizes. Even though a P13 came equipped with tubular wheels in the 622mm size (aka 700c), the frame was sized to handle the larger 630mm (aka 27") clincher/wired on wheelsets. A drop bolt was utilized on the Campagnolo brake calipers in order to reach the tubular wheelset.
Sometime during 1971, the P13 began receiving the changes that you mention. Kurt started a thread on this transition 13 years ago. Initially, IIRC, he concluded the transition occurred sometime in late spring. However, we found examples from earlier in the year which incorporated the changes, including my early March 1971 P13.
My '71 P13 somewhere west of Schulenburg, TX on a cold, wet, day in March 2023, thus the failure to take the picture from the drive-side. PS, the roads were rather rough that day but my Paramount provided a comfortable ride.
I do hope this is helpful information. Of course, 700c clincher wheelsets pair nicely on P13s, and for riders who don't want to run tubulars, this is a great alternative. I have also squeezed 27 X 1&1/8 wheels on my P13.
Finally, do you live in Harford County?
Kurt is a friend (also to many here on C&V) and a prolific poster since 2005. His username is cudak888 and his Paramount Registry is a valuable asset to all Paramount owners.
To clarify, the change in P13 versions, to which he refers, and you noted, was not for 700c clincher or wired on wheels, but specifically refers to tubular wheelsets.
Prior to 1971, all models of Paramount men's road bike shared the same geometry, build features, forks, and tubing lengths for specific frame sizes. Even though a P13 came equipped with tubular wheels in the 622mm size (aka 700c), the frame was sized to handle the larger 630mm (aka 27") clincher/wired on wheelsets. A drop bolt was utilized on the Campagnolo brake calipers in order to reach the tubular wheelset.
Sometime during 1971, the P13 began receiving the changes that you mention. Kurt started a thread on this transition 13 years ago. Initially, IIRC, he concluded the transition occurred sometime in late spring. However, we found examples from earlier in the year which incorporated the changes, including my early March 1971 P13.
My '71 P13 somewhere west of Schulenburg, TX on a cold, wet, day in March 2023, thus the failure to take the picture from the drive-side. PS, the roads were rather rough that day but my Paramount provided a comfortable ride.
I do hope this is helpful information. Of course, 700c clincher wheelsets pair nicely on P13s, and for riders who don't want to run tubulars, this is a great alternative. I have also squeezed 27 X 1&1/8 wheels on my P13.
Finally, do you live in Harford County?
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Likes For pastorbobnlnh:
#21
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Please tell us that you welded an insert inside of the steerer tube and didn't show that step. The idea that you welded the steerer tube back together end-to-end does not seem structurally sound to me.
I love the creativity, but that particular junction scares me. I wouldn't ride it.
I love the creativity, but that particular junction scares me. I wouldn't ride it.
That said, I'd probably cut the threads farther down. I bought a cheap steerer die, which I have used a couple times to shorten steerers. As long as the internal butts work out to allow a stem down in there, all's well with that approach. My steerer die is just a 1x24 die I got from China on Ebay. I think it was $40 for the die plus the die holder/handles. I slotted it with an angle grinder so I have some adjustment in the thread fit.
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Last edited by scarlson; 10-06-23 at 02:00 PM.
Likes For scarlson:
#22
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
The whole thing has been a mess. Herse, Cooper, and Taylor are in storage in NH right now, along with the majority of my bike junkpile and a ton of SAAB car parts I need to sell or give away. I just did my first real ride in 2 months today!! Anddd found out I need a new back tire for my Trek. So, I'm still out of the game for another while - at least until I get the cars in good shape and the commuter bikes back on the road.
[ /thread_hijack ]
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Likes For scarlson:
#23
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Where's @scarlson when we need him.
Ride on, brave frame butchers!
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Likes For scarlson:
#24
Le Crocodile
Join Date: Oct 2005
Location: Santa Barbara Calif.
Posts: 1,873
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 370 Post(s)
Liked 788 Times
in
311 Posts
If the weld is done properly, then the steerer modification is just fine. I would have just threaded it down, but that steerer isn't going to fail.
High(er) stressed stuff is butt-welded all the time. Love the save 88ss!
High(er) stressed stuff is butt-welded all the time. Love the save 88ss!
__________________
#25
Junior Member
Thread Starter
Again today I had a lot of fun racking up some miles on this bike, doing some fast riding to beat some sketchy weather on the way home. I have been riding a number of thousands of miles per year lately, and if that continues I can see me racking up a few thousand on this bike over the next year.