Diagonal crosswalks?
#1
Full Member
Thread Starter
Diagonal crosswalks?
Intersection of Mary and Homestead in Sunnyvale, near Homestead High School.
https://goo.gl/maps/K1FcDTYwwxvphmgFA
The markings seem to suggest that diagonal crossing is supposed to be allowed there. If so, what are the current rules for crossing such crosswalks? I inspected all corners of this intersection, and I couldn't see any special traffic control devices intended to control diagonal crosswalks. All stop lights, vehicular and pedestrian, are pointing in "regular" directions, i.e. they control "regular" crosswalks and traffic. How and when is one allowed to cross diagonally?
And if this intersection is not intended to be diagonally crossable, then what are those extra stripes doing there?
https://goo.gl/maps/K1FcDTYwwxvphmgFA
The markings seem to suggest that diagonal crossing is supposed to be allowed there. If so, what are the current rules for crossing such crosswalks? I inspected all corners of this intersection, and I couldn't see any special traffic control devices intended to control diagonal crosswalks. All stop lights, vehicular and pedestrian, are pointing in "regular" directions, i.e. they control "regular" crosswalks and traffic. How and when is one allowed to cross diagonally?
And if this intersection is not intended to be diagonally crossable, then what are those extra stripes doing there?
Last edited by AndreyT; 05-19-23 at 07:00 PM.
#2
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18378 Post(s)
Liked 4,512 Times
in
3,354 Posts
I would think if they were intended to be diagonal crosswalks, they would be better marked, and would indicate crosswalks across the entire street.
https://www.alpharetta.ga.us/governm...town-august-18
This article seems to have similar marking to what you're seeing.
https://www.signalsaz.com/articles/t...-safety-month/
So, it is officially called a "Pedestrian Scramble".
At least in the Alpharetta Georgia case, they seem to indicate that there is a special yellow push button that pedestrians can use to stop all traffic for the diagonal crossing.
If you go to that intersection, look for button activated crossings. And look at what happens during the signal cycles. Are all cars stopped at the same time?
https://www.alpharetta.ga.us/governm...town-august-18
This article seems to have similar marking to what you're seeing.
https://www.signalsaz.com/articles/t...-safety-month/
So, it is officially called a "Pedestrian Scramble".
At least in the Alpharetta Georgia case, they seem to indicate that there is a special yellow push button that pedestrians can use to stop all traffic for the diagonal crossing.
If you go to that intersection, look for button activated crossings. And look at what happens during the signal cycles. Are all cars stopped at the same time?
#3
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4338 Post(s)
Liked 2,981 Times
in
1,617 Posts
You know what's missing in this photo, are the lane markers for turning cars - drivers would have a more difficult time judging their line with the crosswalks all the way across than with the OP's photo - where you can see the turning lane guides.
#4
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,481
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 967 Post(s)
Liked 1,631 Times
in
1,047 Posts
Pretty simple really...
RUN!!!
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#5
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18378 Post(s)
Liked 4,512 Times
in
3,354 Posts
Head to the destination lane. Don't run into oncoming traffic.
Street marking can get pretty busy. One could do the lane guides with a thick yellow or red stripe that could even go across the top of the white Zebra. Or, rather than Zebras, do simple white outlines for the cross walks.
#6
Senior Member
Join Date: May 2021
Location: San Francisco
Posts: 2,039
Bikes: addict, aethos, creo, vanmoof, sirrus, public ...
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1279 Post(s)
Liked 1,393 Times
in
711 Posts
Intersection of Mary and Homestead in Sunnyvale, near Homestead High School.
https://goo.gl/maps/K1FcDTYwwxvphmgFA
The markings seem to suggest that diagonal crossing is supposed to be allowed there. If so, what are the current rules for crossing such crosswalks? I inspected all corners of this intersection, and I couldn't see any special traffic control devices intended to control diagonal crosswalks. All stop lights, vehicular and pedestrian, are pointing in "regular" directions, i.e. they control "regular" crosswalks and traffic. How and when is one allowed to cross diagonally?
And if this intersection is not intended to be diagonally crossable, then what are those extra stripes doing there?
https://goo.gl/maps/K1FcDTYwwxvphmgFA
The markings seem to suggest that diagonal crossing is supposed to be allowed there. If so, what are the current rules for crossing such crosswalks? I inspected all corners of this intersection, and I couldn't see any special traffic control devices intended to control diagonal crosswalks. All stop lights, vehicular and pedestrian, are pointing in "regular" directions, i.e. they control "regular" crosswalks and traffic. How and when is one allowed to cross diagonally?
And if this intersection is not intended to be diagonally crossable, then what are those extra stripes doing there?
__________________
#7
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,658
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1027 Post(s)
Liked 2,531 Times
in
1,059 Posts
The only problem are the illiterate or obtuse drivers who cannot or will not read and obey the "No Right Turn on Red" signs.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
#8
Senior Member
Join Date: May 2021
Location: San Francisco
Posts: 2,039
Bikes: addict, aethos, creo, vanmoof, sirrus, public ...
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1279 Post(s)
Liked 1,393 Times
in
711 Posts
On Montgomery Street, there are separate cross-walk signals for diagonal crossing, which takes away most of the confusion. Without them, it would be an unholy mess.
The only problem are the illiterate or obtuse drivers who cannot or will not read and obey the "No Right Turn on Red" signs.
The only problem are the illiterate or obtuse drivers who cannot or will not read and obey the "No Right Turn on Red" signs.
the only place i can recall seeing actual diagonal markings like the OP’s example is the new crossing at bridgeway in sausalito, which definitely has a separate control.
__________________
#9
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18378 Post(s)
Liked 4,512 Times
in
3,354 Posts
I wonder how many pedestrians get confused with controls, or simply just hit the stop everything button.
Separate curb cuts for diagonals may help.
I have one median separated bike path that inevitably getting off the path and onto the roadside bike lane to the left requires two cross walks. The diagonal would be nice, but I doubt the city will put one in. Already it has too complex of a traffic flow pattern, and cyclists are always considered an afterthought.
Separate curb cuts for diagonals may help.
I have one median separated bike path that inevitably getting off the path and onto the roadside bike lane to the left requires two cross walks. The diagonal would be nice, but I doubt the city will put one in. Already it has too complex of a traffic flow pattern, and cyclists are always considered an afterthought.
#10
Full Member
Thread Starter
Some important details escaped my attention when I saw that intersection for the very first time.
Firstly, signs posted next to pedestrian "request crossing" buttons explicitly state that "scramble" mode is active for some period in the morning and in the afternoon. I presume that during these periods the intersection always uses "scramble" mode when it decides to allow pedestrian traffic.
Secondly, yes, there are dedicated diagonal pedestrian signals for diagonal crosswalks. I simply missed them previously. And yes, in "scramble" mode all pedestrian signals display "walk" signal (including the diagonal ones), while all vehicular signals become red.
Firstly, signs posted next to pedestrian "request crossing" buttons explicitly state that "scramble" mode is active for some period in the morning and in the afternoon. I presume that during these periods the intersection always uses "scramble" mode when it decides to allow pedestrian traffic.
Secondly, yes, there are dedicated diagonal pedestrian signals for diagonal crosswalks. I simply missed them previously. And yes, in "scramble" mode all pedestrian signals display "walk" signal (including the diagonal ones), while all vehicular signals become red.
#11
Full Member
Thread Starter
Bizarre intersection... The posted morning scramble mode period ends at 9:15am.
And indeed, if you arrive at around 9:20am, diagonal crossing is no longer available, and the lights revert to regular mode of operation. However, if you press the button on the sidewalk box and wait for the pedestrian crossing light to turn green, the plain-language voice announcement that emanates from the box will still claim that the crossing operates in scramble mode! The voice announcement says something along the lines of "scramble mode in operation, all vehicular traffic lights are now red", which is not true. Apparently, the actual lights and the voice announcement device operate from a different clock or use different cut-off time for some reason (?). The lights stop using scramble mode, but the voice announcement device believes scramble is still active.
If I understand correctly, these voice announcements are there to improve safety for vision-impaired people. I don't know whether they actually rely on such devices, but making the lights and the voice operate out-of-sync achieves exactly the opposite...
And indeed, if you arrive at around 9:20am, diagonal crossing is no longer available, and the lights revert to regular mode of operation. However, if you press the button on the sidewalk box and wait for the pedestrian crossing light to turn green, the plain-language voice announcement that emanates from the box will still claim that the crossing operates in scramble mode! The voice announcement says something along the lines of "scramble mode in operation, all vehicular traffic lights are now red", which is not true. Apparently, the actual lights and the voice announcement device operate from a different clock or use different cut-off time for some reason (?). The lights stop using scramble mode, but the voice announcement device believes scramble is still active.
If I understand correctly, these voice announcements are there to improve safety for vision-impaired people. I don't know whether they actually rely on such devices, but making the lights and the voice operate out-of-sync achieves exactly the opposite...
#12
Senior Member
Join Date: Jan 2010
Location: Walnut Creek, CA
Posts: 2,668
Bikes: 2023 Canyon Aeoroad CF SL, 2015 Trek Emonda SLR, 2002 Litespeed Classic, 2005 Bianchi Pista, Some BikesDirect MTB I never ride.
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 647 Post(s)
Liked 136 Times
in
89 Posts
That's just weird that there's a scramble schedule where it actually ends. Seems very dangerous to have the diagonal striping yet not allow that movement, which could lead to confusion and even an accident. Especially if it's a first or second time using the intersection. What if you previously used it during the scramble phase when all lights were red, and the next time you use it, it's outside of the schedule, but don't realize it. Is the 20 extra seconds really affecting traffic? Also, the most congested time for cars is morning/afternoon, which seems to align with the scramble period. Weird.
We have a lot of these intersections in Walnut Creek, none of which have a schedule, and are the same scramble mode all day long.
We have a lot of these intersections in Walnut Creek, none of which have a schedule, and are the same scramble mode all day long.