What Colnago is this?
#1
Senior Member
Thread Starter
What Colnago is this?
So I bought this Colnago off a friend. What can you tell me about it? It has Campy headset, bottom bracket, and seatpost binder bolt. Campy dropouts on frame and fork. Year? Model? Frame tubing? Thank you.
Likes For Jicafold:
#3
Senior Member
Join Date: Jun 2003
Location: SW Ohio
Posts: 1,258
Bikes: Classic lugged-steel road, touring, shopping, semi-recumbent, gravel
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Liked 81 Times
in
32 Posts
I'm guessing early to mid-'80's. It's not a Sprint (which I had until recently) since mine had a chrome chainstay and the chrome fork on mine had the cloverleaf on each side of the fork crown. Your frame does have chrome headlugs which mine didn't have.
#4
Senior Member
Join Date: Mar 2012
Location: Niagara Region, Canada
Posts: 1,455
Bikes: 1970s Alex Singer, 1960s Peugeot PX 10, 1960s Bertin C37, 1973 Carre Bertin C 37, 1972 Carlton Kermesse, 1981 Peugeot PX 14 Super Competition
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Liked 266 Times
in
157 Posts
#5
Full Member
Join Date: Nov 2022
Location: California's capital
Posts: 464
Bikes: Litespeed Firenze, Spot Acme, Specialzed S Works Pro Race, Davidson Stiletto, Colnago Superissimo
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 133 Post(s)
Liked 300 Times
in
172 Posts
Very few details mimic my '83 Superissimo and I'll guess this is older. I'm limited to just the one bike so defer to others whether '70s or even '60s.
#6
Senior Member
Join Date: Aug 2020
Location: Saratoga, CA
Posts: 831
Bikes: 1981 Bianchi Specialissima, 1971 Bob Jackson. 2012 Kestrel 4000. 2012 Willier. 2016 Fuji Cross 1.1, 1950 Hetchins, 194X James Fothergill, 1971 Paramount P15, 1973 Paramount P12, 1963 Legnano
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 279 Post(s)
Liked 955 Times
in
391 Posts
WIth the under BB cable routing I'm guessing early 1980's. The one I had was from the mid 1970's and had the routing on the top of the BB.
#9
Senior Member
Join Date: Jan 2016
Posts: 3,451
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 875 Post(s)
Liked 2,292 Times
in
1,281 Posts
Fork is unlike any Colnago I’ve seen and the BB shell is different . The head badging is different as well. Not sure on this one. Joe
#10
FalconLvr
Join Date: Jun 2006
Location: SW Virginia
Posts: 1,298
Bikes: 62 Falcon, 58 Raleigh Lenton Gran Prix, 74 Raleigh Pro, 75 Raleigh Int, 75 Raleigh Comp, 76 Colnago Super, 75 Crescent, 80 Peugeot PX10, plus others too numerous to mention!
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 51 Post(s)
Liked 112 Times
in
68 Posts
Hmmmm,,,,no clover leaf cutout under BB, but clover cutouts in chrome lugs,,,hmmm
#11
Senior Member
Thread Starter
#12
Senior Member
Join Date: Jan 2010
Location: se MIch.
Posts: 2,312
Bikes: 1938 claud butler,1983 Basso,teledyne titan,teocali super,nrs,1993 stumpjumper fsr,Paramountain,Paramount Buell(sold),4 banger,Zaskar LE,Colnago Master Ibex MTB,1987ish,.etc....
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 804 Post(s)
Liked 2,986 Times
in
1,499 Posts
Mid 80's XL model?
Last edited by '02 nrs; 03-04-24 at 09:57 AM.
#13
Senior Member
Join Date: May 2005
Location: Southern Maryland
Posts: 1,448
Bikes: A few
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 289 Post(s)
Liked 198 Times
in
103 Posts
My memory is a little sketchy on this, but Colnago was not the only manufacturer to use the clover/club. I should have kept better records over the years, but want to say it was a French or Belgian company that used a similar marking. Terryn or Martelli? I can’t remember.
Others have mentioned the lack of the clover/club cutout in the bottom bracket, and the absence of any markings on the fork crown. The crown style isn’t consistent with any others I’ve seen from that time period.
The driveside rear dropout shows the hole for the Portacatena, which was used between circa 1977 and maybe 1983. Colnagos manufactured during this time frame would have had the cutout under the bottom bracket, and most likely the fork crown would have been embossed with the Colnago logo.
Seat stay attachment is not consistent with Colnagos of this time frame. I would have expected to see either a fluted attachment, or an attachment embossed with Colnago.
There was a Colnago Sport, which was an entry level bike, but details are inconsistent with those I’ve seen.
What is the threading on the bottom bracket?
Others have mentioned the lack of the clover/club cutout in the bottom bracket, and the absence of any markings on the fork crown. The crown style isn’t consistent with any others I’ve seen from that time period.
The driveside rear dropout shows the hole for the Portacatena, which was used between circa 1977 and maybe 1983. Colnagos manufactured during this time frame would have had the cutout under the bottom bracket, and most likely the fork crown would have been embossed with the Colnago logo.
Seat stay attachment is not consistent with Colnagos of this time frame. I would have expected to see either a fluted attachment, or an attachment embossed with Colnago.
There was a Colnago Sport, which was an entry level bike, but details are inconsistent with those I’ve seen.
What is the threading on the bottom bracket?
Last edited by satbuilder; 03-04-24 at 08:21 AM.
#15
Senior Member
Join Date: Jul 2022
Location: Pac NW
Posts: 1,938
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1084 Post(s)
Liked 1,820 Times
in
662 Posts
I had and sold this same model. Colnago Sport XL. It was confusing to me as well.
If the drop-outs didn't have colnago stamped in them, I would not have believed it.
If the drop-outs didn't have colnago stamped in them, I would not have believed it.
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
Likes For Robvolz:
#16
Senior Member
Thread Starter
#17
Senior Member
Join Date: Aug 2010
Location: Wurundjeri Country
Posts: 2,469
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 1079 Post(s)
Liked 1,899 Times
in
931 Posts
Paging saarf
Have a look here if you haven’t already: https://saarf.london/2013/02/19/how-...-fake-colnago/
Martelly used a slightly different shaped clubs cutout, so I don’t think it’s that.
The two cable guides are a Colnago trait, but would have been easily copied.
I dunno, I’m probably leaning to a low end Colnago, but will defer to the experts.
Have a look here if you haven’t already: https://saarf.london/2013/02/19/how-...-fake-colnago/
Martelly used a slightly different shaped clubs cutout, so I don’t think it’s that.
The two cable guides are a Colnago trait, but would have been easily copied.
I dunno, I’m probably leaning to a low end Colnago, but will defer to the experts.
#18
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1608 Post(s)
Liked 2,216 Times
in
1,103 Posts
Velo-Retro: Colnago Super Timeline
Probably not a super of any kind, even with the chrome head lugs.
1981
- Chain stay bridge is spool shape (no longer tube)
- Chain stays stamped COLNAGO on sides, long stiffening flutes inner-side of chain stays and right chain stay chromed
- Derailleur cable routing on underside of bottom bracket
Probably not a super of any kind, even with the chrome head lugs.
1981
- Chain stay bridge is spool shape (no longer tube)
- Chain stays stamped COLNAGO on sides, long stiffening flutes inner-side of chain stays and right chain stay chromed
- Derailleur cable routing on underside of bottom bracket
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Last edited by SJX426; 03-04-24 at 02:14 PM.