frame fit cube peloton long legs short torso
#1
Newbie
Thread Starter
Join Date: Jun 2013
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
frame fit cube peloton long legs short torso
I am looking into purchasing a cube peloton and would appreciate some advice on fitting. I am 178cm tall (5ft10) but have an inseam (pubic bone to floor) of 86cm (34 inches), putting me in the high legs:torso length ratio category. According to the online fitting calculator at https://www.competitivecyclist.com the following frame sizing would fit me well:
The Eddy Fit (cm)
-------------------------------------------
Seat tube range c-c: 56.9 - 57.4
Seat tube range c-t: 58.6 - 59.1
Top tube length: 54.6 - 55.0
Stem Length: 10.1 - 10.7
BB-Saddle Position: 72.9 - 74.9
Saddle-Handlebar: 54.7 - 55.3
Saddle Setback: 7.5 - 7.9
Looking at the cube peloton frame sizing at https://www.cube.eu/en/road/road-race/peloton-pro/ I believe that the choice is between the 56cm and 58cm frames (the cube website sizing puts me ideally at ~57.2cm based on my inseam length). The question is: which would be better? Obviously modifications might be necessary to both setups.
56cm: could raise seatpost and get a longer stem if necessary
58cm: change to a shorter stem
As I won't actually be racing but rather riding for fun I don't mind raising the handlebars, leading to a relaxed geometry, if this would help i.e. comfort is more important than performance for me.
Another consideration is that riders in various forums and reviews claim that the peloton frame "feels" small and often size up.
Will talk to the LBS next week but would also appreciate some input from cube owners and/or similarly long-legged cyclists.
Thanks in advance!
The Eddy Fit (cm)
-------------------------------------------
Seat tube range c-c: 56.9 - 57.4
Seat tube range c-t: 58.6 - 59.1
Top tube length: 54.6 - 55.0
Stem Length: 10.1 - 10.7
BB-Saddle Position: 72.9 - 74.9
Saddle-Handlebar: 54.7 - 55.3
Saddle Setback: 7.5 - 7.9
Looking at the cube peloton frame sizing at https://www.cube.eu/en/road/road-race/peloton-pro/ I believe that the choice is between the 56cm and 58cm frames (the cube website sizing puts me ideally at ~57.2cm based on my inseam length). The question is: which would be better? Obviously modifications might be necessary to both setups.
56cm: could raise seatpost and get a longer stem if necessary
58cm: change to a shorter stem
As I won't actually be racing but rather riding for fun I don't mind raising the handlebars, leading to a relaxed geometry, if this would help i.e. comfort is more important than performance for me.
Another consideration is that riders in various forums and reviews claim that the peloton frame "feels" small and often size up.
Will talk to the LBS next week but would also appreciate some input from cube owners and/or similarly long-legged cyclists.
Thanks in advance!
Last edited by Clumsy Climber; 06-23-13 at 02:21 AM.
#3
Senior Member
Join Date: May 2013
Location: Pacific Northwest
Posts: 1,990
Bikes: ‘87 Marinoni SLX Sports Tourer, ‘79 Miyata 912 by Gugificazione
Mentioned: 166 Post(s)
Tagged: 0 Thread(s)
Quoted: 502 Post(s)
Liked 466 Times
in
256 Posts
I'll bet that you would find that top tube + stem length recommendation to be pretty stretched out. You say that you're more interested in a relaxed riding position. I would recommend getting the larger frame size so that the bars will be easier to get up where you'd like them, but watch TT length pretty carefully as a priority in the frame selection. And be certain that your LBS doesn't try to talk you into a more aggressive position than you want.
I also have rather long legs/short torso (6'1" tall, 90cm pubic bone height as I recall; seat height is 81 cm above the BB spindle). I typically prefer a 62-64 cm frame, and find that a TT of 58-59 cm is about right, with an 8-9 cm stem and the bars at or slightly below seat height. When I was younger and more flexible I felt that I could handle a lower bar and longer stem, but wish that I hadn't because my neck, back and shoulders are much more comfortable now.
You will also probably find that you like the seat back a ways, maybe even more than that recommendation. My saddle tips are 9-10.5 cm behind the BB. Forward of that makes me slide forward on the saddle. My bike with a 72 degree ST was no problem, but that old Miyata with a 74 degree ST was never really comfortable until I got a saddle on a seat post that I could slide way back. Now its great and very comfortable. Several other "tricks" for people with our proportions: try handlebars with shorter reach and rotate the levers up on the bars to noticeably shorten the reach.
I also have rather long legs/short torso (6'1" tall, 90cm pubic bone height as I recall; seat height is 81 cm above the BB spindle). I typically prefer a 62-64 cm frame, and find that a TT of 58-59 cm is about right, with an 8-9 cm stem and the bars at or slightly below seat height. When I was younger and more flexible I felt that I could handle a lower bar and longer stem, but wish that I hadn't because my neck, back and shoulders are much more comfortable now.
You will also probably find that you like the seat back a ways, maybe even more than that recommendation. My saddle tips are 9-10.5 cm behind the BB. Forward of that makes me slide forward on the saddle. My bike with a 72 degree ST was no problem, but that old Miyata with a 74 degree ST was never really comfortable until I got a saddle on a seat post that I could slide way back. Now its great and very comfortable. Several other "tricks" for people with our proportions: try handlebars with shorter reach and rotate the levers up on the bars to noticeably shorten the reach.
#4
Newbie
Thread Starter
Join Date: Jun 2013
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks a lot for the input! Sounds like great advice, especially on how to adjust non-obvious things like horizontal saddle position and rotated bars. I doubt I would have thought of that.