Opinion/Poll
#1
Senior Member
Thread Starter
Join Date: May 2013
Posts: 132
Likes: 0
Liked 0 Times
in
0 Posts
Opinion/Poll
Hi all
I will like to seek opinion/poll on this : I am considering to change my cockpit to white bars, stem and bartape. Current set up is black.
looking forward to your views...thanks in advance
I will like to seek opinion/poll on this : I am considering to change my cockpit to white bars, stem and bartape. Current set up is black.
looking forward to your views...thanks in advance
#3
Senior Member
Thread Starter
Join Date: May 2013
Posts: 132
Likes: 0
Liked 0 Times
in
0 Posts
#6
Senior Member
Join Date: Mar 2012
Location: Minnesota
Posts: 1,968
Bikes: '09 Trek 2.1 * '75 Sekine * 2010 Raleigh Talus 8.0 * '90 Giant Mtb * Raleigh M20 * Fuji Nevada mtb
Likes: 0
Liked 0 Times
in
0 Posts
Stem, spacers, top cap and seat all should go to white. Black bar tape is still ok. There's a bike like that I see often and it actually is easy on the eyes.
__________________
FB4K - Every October we wrench on donated bikes. Every December, a few thousand kids get bikes for Christmas. For many, it is their first bike, ever. Every bike, new and used, was donated, built, cleaned and repaired. Check us out on FaceBook: FB4K.
Disclaimer: 99% of what I know about cycling I learned on BF. That would make, ummm, 1% experience. And a lot of posts.
FB4K - Every October we wrench on donated bikes. Every December, a few thousand kids get bikes for Christmas. For many, it is their first bike, ever. Every bike, new and used, was donated, built, cleaned and repaired. Check us out on FaceBook: FB4K.
Disclaimer: 99% of what I know about cycling I learned on BF. That would make, ummm, 1% experience. And a lot of posts.
#8
Senior Member
Join Date: Oct 2004
Posts: 700
Bikes: Cannondale CAAD10 Team, Giant TCR
Likes: 0
Liked 0 Times
in
0 Posts
I had the white stem and bar tape on my white Giant TCR. It didn't look too good.
To give you an idea, here's my TCR with the white tape. I've replaced the stem with the black one since.
I'll be replacing the tape to black once it wears out. I've changed the saddle to black already.
Keep the current look. I like it the way it is.
To give you an idea, here's my TCR with the white tape. I've replaced the stem with the black one since.
I'll be replacing the tape to black once it wears out. I've changed the saddle to black already.
Keep the current look. I like it the way it is.
#10
Banned
Join Date: Jan 2006
Location: take your time, enjoy the scenery, it will be there when you get to it
Posts: 7,281
Bikes: 07 IRO BFGB fixed-gear, 07 Pedal Force RS
Likes: 0
Liked 1 Time
in
1 Post
White Hudz are terrible. After about 6 months of everyday use, the rubber starts to deteriorate and become sticky.
#12
Senior Member
Join Date: Feb 2014
Location: Cabot, Arkansas
Posts: 1,538
Bikes: Lynskey Twisted Helix Di2 Ti, 1987 Orbea steel single speed/fixie, Orbea Avant M30, Trek Fuel EX9.8 29, Trek Madone 5 series, Specialized Epic Carbon Comp 29er, Trek 7.1F
Likes: 0
Liked 2 Times
in
2 Posts
I think it looks great just like it is but I would agree the red bar tape to match that little stripe on the seat post would look awesome.
#14
SuperGimp
#16
Senior Member
Thread Starter
Join Date: May 2013
Posts: 132
Likes: 0
Liked 0 Times
in
0 Posts
#17
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Likes: 0
Liked 58 Times
in
36 Posts
On a bike decorated like yours you need a balance of both the black and the white. I'm not sure whether going white up front would accomplish anything. I'm afraid it would look "washed out". I don't think you can improve on what you have. I would just leave it. Besides, the longevity of black tape is much greater than white. Except for minimally padded microfiber tape like Fizik's, white is almost impossible to keep clean.
#18
Banned
Join Date: Jan 2006
Location: take your time, enjoy the scenery, it will be there when you get to it
Posts: 7,281
Bikes: 07 IRO BFGB fixed-gear, 07 Pedal Force RS
Likes: 0
Liked 1 Time
in
1 Post
I have no problem cleaning the white Deda tape I use. It takes about 5 minutes with soapy water and a green scrubby.
#19
Senior Member
Thread Starter
Join Date: May 2013
Posts: 132
Likes: 0
Liked 0 Times
in
0 Posts
On a bike decorated like yours you need a balance of both the black and the white. I'm not sure whether going white up front would accomplish anything. I'm afraid it would look "washed out". I don't think you can improve on what you have. I would just leave it. Besides, the longevity of black tape is much greater than white. Except for minimally padded microfiber tape like Fizik's, white is almost impossible to keep clean.
Seen bikes with the same frame with white upfront ...thought it's something different.
thus looking for opinion.
thanks for ur reply
#20
Other Worldly Member
OK Martha Stewart, let's see your full kit.
__________________
Make ******* Grate Cheese Again
Make ******* Grate Cheese Again