Cannondale L/M Tandem measurements
06-13-13, 04:12 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2010
Location: UK
Posts: 93
Bikes: Canyon Dura ace, Pinarello Asolo Super Record, Holdsworth Nuovo Record, Duratec Di2 Tandem, Brompton
Likes: 0
Liked 2 Times
in
1 Post
Cannondale L/M Tandem measurements
I am renting a Cannondale tandem for a short 2 day trip to ride up Ventoux in July.
The rental shop only has a L/M for use and I just can't find the measurements anywhere.
I have scoured the net and havent been able to turn up anything.
Whilst I have emailed the rental shop, I was wondering if anyone knew the C to C measurement in cm for the seat tube? (i.e. centre of BB to top of seat tube)
My current Ibis is 59cm and was hoping this was similar.
Thanks
Tony
The rental shop only has a L/M for use and I just can't find the measurements anywhere.
I have scoured the net and havent been able to turn up anything.
Whilst I have emailed the rental shop, I was wondering if anyone knew the C to C measurement in cm for the seat tube? (i.e. centre of BB to top of seat tube)
My current Ibis is 59cm and was hoping this was similar.
Thanks
Tony
06-13-13, 04:32 PM
#2
Senior Member
The picture you posted is a 2009-2012 RT which afaik did not come in a L/M.
Geometry for the 2008 which does come in a L/M is shown in the catalog https://media.cannondale.com/media/Ma...talog_2008.pdf on page 50
Geometry for the 2008 which does come in a L/M is shown in the catalog https://media.cannondale.com/media/Ma...talog_2008.pdf on page 50
