Air compressor for Presta valves
#1
Senior Member
Thread Starter
Air compressor for Presta valves
Hello
Still in the slow process of setting up my workshop. What do you use to inflate presta valves from an air compressor?
Yes, I have the screw on adapters, but was looking for something quicker to use. The Park Tool inflator is beyond my means.
Was hoping for a more economical solution.
Thanks
Still in the slow process of setting up my workshop. What do you use to inflate presta valves from an air compressor?
Yes, I have the screw on adapters, but was looking for something quicker to use. The Park Tool inflator is beyond my means.
Was hoping for a more economical solution.
Thanks
#2
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,986
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4946 Post(s)
Liked 8,087 Times
in
3,826 Posts
Prestaflator might be your answer.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
#3
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,716
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5788 Post(s)
Liked 2,580 Times
in
1,430 Posts
2 parts to buy + some ingenuity and your good to go.
Find a cheap compressor blow gun with a replaceable tip. Pistol grip is preferred so you don't have to squeeze your hand between the spokes
Plus a push-on PV adapter of the kind used on PV floor pumps.
Now attach them into s single unit (the ingenuity part).
Mine was jammed and soldered, but how to attach depends on the specific details.
Find a cheap compressor blow gun with a replaceable tip. Pistol grip is preferred so you don't have to squeeze your hand between the spokes
Plus a push-on PV adapter of the kind used on PV floor pumps.
Now attach them into s single unit (the ingenuity part).
Mine was jammed and soldered, but how to attach depends on the specific details.
Likes For FBinNY:
#4
Senior Member
Join Date: Oct 2005
Posts: 1,174
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 381 Post(s)
Liked 145 Times
in
93 Posts
Presta Adapter With Chain fits into standard schrader heads on a floor pump or air compressor and allows them to be used with presta valve tubes.
https://sks-us.com/collections/pump-...ter-with-chain
https://sks-us.com/collections/pump-...ter-with-chain
#5
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,786
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times
in
1,934 Posts
I just cut off the Schrader head on a standard inflator and replaced it with a Silca track pump head:
Likes For JohnDThompson:
#6
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,084
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4205 Post(s)
Liked 3,865 Times
in
2,312 Posts
Two solutions I have used.
The upper item is a Campy frame pump head attached to a floor pump hose. My mentor made this a few decades ago (and he made the floor pump this is connected to!)
The lower item is what we use to call (before we got woke and all ) a damsel in distress device. Back when only women rode with Schreader valves and guys only used Prestas I came up with this to allow a Presta pump head attach to a SV. This one is also a few decades old. These days I would use a current Twin Head type of air chuck and hose clamp it to a SV. Andy (who hopes that readers know I am using some satire in how I wrote this)
The upper item is a Campy frame pump head attached to a floor pump hose. My mentor made this a few decades ago (and he made the floor pump this is connected to!)
The lower item is what we use to call (before we got woke and all ) a damsel in distress device. Back when only women rode with Schreader valves and guys only used Prestas I came up with this to allow a Presta pump head attach to a SV. This one is also a few decades old. These days I would use a current Twin Head type of air chuck and hose clamp it to a SV. Andy (who hopes that readers know I am using some satire in how I wrote this)
__________________
AndrewRStewart
AndrewRStewart
#7
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,882
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3238 Post(s)
Liked 2,086 Times
in
1,181 Posts
I dont bother with my air compressor. Makes too much noise when its adding air into the tank and it needs to run periodically to stay at pressure. Easier to just use a floor pump.
#8
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,949
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,911 Times
in
1,141 Posts
I currently have three of the Silca pump heads still available in the for sale portion of C&V. A little fuel line hose and a fitting for your compressor, or pump and you will be ready to go. I will refresh the FS add to bring it back to the top if the list. Smiles, MH
#9
Senior Member
Join Date: Apr 2016
Posts: 1,227
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 434 Times
in
333 Posts
You'll also want a valve somewhere - when using an open inflator hose with my portable compressor I just zero the compressor's regulator, but a pistol grip inflator with a gauge would be easier to use and more convenient.
#10
Senior Member
Thread Starter
I appreciate the replies.
A question: For using a floor pump hose and head attached to the pistol, I measured the diameter and they were different. Will they kiss?
A question: For using a floor pump hose and head attached to the pistol, I measured the diameter and they were different. Will they kiss?
#12
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,395 Times
in
2,056 Posts
I just screw on the adapter.
By the time I wheel the bike over, dig the chuck and adapter out of the tool box, bring the valve around, and unscrew the cap and nut, what's a couple more seconds?
By the time I wheel the bike over, dig the chuck and adapter out of the tool box, bring the valve around, and unscrew the cap and nut, what's a couple more seconds?
Likes For dedhed:
#13
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,786
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times
in
1,934 Posts
#15
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
+1. Buy the cheap one with no gauge and set the tire pressure using your compressor's regulator. Here is the web site: https://www.prestacycle.com/product/...tire-inflator/
#16
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,882
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3238 Post(s)
Liked 2,086 Times
in
1,181 Posts
My problem is my one and only air compressor is a big and heavy 17+ gallon Lowes model that I leave in my shed as I only use it to blow out the in-ground sprinkler system. Its a beast to move in or out of my basement. I suppose I could leave it in the basement and buy extra hose to do the sprinklers. Then use it for bikes. Its still a really noisy unit, have to ponder this,
Likes For Steve B.:
#17
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1608 Post(s)
Liked 2,216 Times
in
1,103 Posts
I use another tool llike this one to get it to 100PSI then use the Silca floor pump to take it the rest of the way.
Amazon.com: Tire Pressure Gauge with Inflator (170 PSI) - Air Pressure Gauge for Tires - Air Compressor Tire Inflator Attachment – Nozzle Tire Gauge Air Chuck : Automotive
Amazon.com: Tire Pressure Gauge with Inflator (170 PSI) - Air Pressure Gauge for Tires - Air Compressor Tire Inflator Attachment – Nozzle Tire Gauge Air Chuck : Automotive
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Likes For SJX426:
#18
Senior Member
I bought a digital inflator originally for my car tires, then
I added this chuck for presta, I like it.
https://www.amazon.com/JACO-Lightnin.../dp/B07ZHLX9XD
I added this chuck for presta, I like it.
https://www.amazon.com/JACO-Lightnin.../dp/B07ZHLX9XD
#19
Senior Member
Join Date: Aug 2021
Location: Boston, MA
Posts: 520
Bikes: 2021 Trek FX Sport 4, ~1996 Mongoose Crossway 4.50
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 1,308 Times
in
433 Posts
I bought a digital inflator originally for my car tires, then
I added this chuck for presta, I like it.
https://www.amazon.com/JACO-Lightnin.../dp/B07ZHLX9XD
I added this chuck for presta, I like it.
https://www.amazon.com/JACO-Lightnin.../dp/B07ZHLX9XD
I connect the inflator to an air tank that I periodically fill up with my air compressor. I have this light aluminum air tank: Jegs
Mark
#20
Senior Member
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
You can get inexpensive digital inflators on EBay for use with a compressor that come with shrader and presta fittings you can swap. If you're strictly, or mainly using it for bicycle tires, just leave the presta fitting in place. I happen to usually use mine for car tires, so I leave the schrader fitting in place. The one I have is accurate compared to a digital gauge I have.
I don't use it for my bike tires because the largest is a mountain bike tire and for that and the more common road and gravel tires, a pump is just easy to use. The compressor with a digital inflator is great for mounting tubeless and for routine inflation of Fat tires.
I don't use it for my bike tires because the largest is a mountain bike tire and for that and the more common road and gravel tires, a pump is just easy to use. The compressor with a digital inflator is great for mounting tubeless and for routine inflation of Fat tires.
Last edited by Camilo; 12-14-22 at 11:05 PM.
#22
Senior Member
Join Date: Aug 2009
Posts: 1,812
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 501 Post(s)
Liked 626 Times
in
370 Posts
HVAC 2 stage nitrogen regulator and Silca head is the right answer. We have it set to 100 lbs, but you can dial up any pressure on the second stage with the turn of a dial. You can put an inline valve at the chuck, but it really isn't needed, (I should have started fixing residential central ACs a long time ago, $$$$$$)...
#23
Senior Member
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
The digital inflator like the $20-$30 ones referenced above that just use a normal compressor quick release are the way to go. It's really nice having an accurate pressure gauge to look at while inflating. rather than guessing and going back and forth with a pressure gauge. I certainly wouldn't trust the regulator on the compressor for the precision that's needed for a bike tire.